New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

AfroFlight Naze32 REV5 Acro Funfly Controller

AfroFlight Naze32 REV5 Acro Funfly Controller

Now save enregistrer 0,00 € 0,00 €

22,99 €
Statut:
Epuisé!
SKU:
9171000510-0
WANT FREE SHIPPING? Click here to find out more!

Le Naze32 populaire est ici! Initialement conçu pour être utilisé avec les petites et moyennes embarcations de multirotor, il est devenu le go-to contrôleur pour une foule de projets et propheads multirotor.

Le "Timecop" infâme Hamasaki Alias ​​était pas heureux avec les limites et les performances d'un 8-bit MCU pourrait livrer sur les plates-formes de FC actuelles, donc il partit faire un contrôleur de vol qui pourrait prendre à peu près toutes les exigences d'un développeur peut jeter à elle, et ainsi est né le Naze32. Au cœur de l'Naze32 est un 32bit ST micro travail d'un cheval processer, avec de la mémoire et de la puissance inexploitée de cpu et une foule de capteurs tout aussi impressionnant. Le Naze est également jumelé avec certains des plus beaux programmes et fonctionnalités GUI pour tirer le meilleur parti de votre configuration.

Le Naze32 intervient alors que la version la plus complète Acro encore, avec les deux broches détroit et 90deg pour votre préférence et un briser le harnais adapté.

La version HobbyKing est autorisé et les redevances sont payées au développeur sur chaque Naze32 vendu.

Caractéristiques:
• sorties moteur flexibles, prennent en charge différents types de cellule:
Quad / Hexa / Tri / Bi / Y4 / Y6 / Octo / Caméra Gimbal. (Valeur par défaut est Quad-X)
• Jusqu'à l'entrée 8 ch RC - prend en charge les récepteurs standards (PWM), PPM Somme récepteur (FrSky, etc), ou Spektrum récepteurs satellite.
• Construit en FrSky télémesure onduleur (port principal / w partagée)
• Surveillance de la tension de la batterie
• Processeur 32 bits moderne fonctionnant à 3.3V / 72MHz (STM32F103CB).
• Onboard MicroUSB pour l'installation et la configuration
• LEDs si brillante, ils pourraient vous aveugler
logiciel de configuration • base-MultiWii pour une installation facile
matériel rev5

Spécifications:
36x36 mm (30,5 mm Montage)
5,3 grammes (sans en-tête, 7,3 grammes avec)
2000 degrés / seconde 3 axes MEMS gyroscope + accéléromètre (MPU6050)
Tension d'entrée: Max 16V sur le rail d'entrée et jusqu'à 35V 6s sur la ligne de détection de tension

Compris:
Naze32 rev5
2x5 pin header
tête de broche 12x2 - option de tête droite (diviser en 4 2x3 pour les broches moteurs / télémétriques) OU
3x6 tête à angle droit et tête 2x3 à angle droit - option angle droit
câble breakout 1x RC

Télécharger le manuel de l' utilisateur pour rev5

Logiciel de configuration - Chrome Baseflight Configurator (préféré)
https://chrome.google.com/webstore/detail/baseflight-configurator/mppkgnedeapfejgfimkdoninnofofigk

On peut aussi utiliser la version 2.3 ou plus récente de MultiWiiConf (Java basé) à partir de http://code.google.com/p/multiwii/downloads/list .

Le logiciel est open-source! référentiel Code à
https://github.com/multiwii/baseflight

  • UGS 9171000510-0
  • Brand Other
  • Capacité ( mAh ) -
  • Poids 25.0000
  • Longueur 60.00
  • Packaging Width 30.00
  • la taille 60.00
  • Naze 32 Flight Controller
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great older board, good price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great older board, good price.

Great fc, used it on my epipdb by quad otters enzo, definitely recommend this board.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great fc, used it on my epipdb by quad otters enzo, definitely recommend this board.

Great flight controller.
Works just fine, great price and easy to program. Very happy with this FC, no problems so far, I run Cleanflight on it with pwm, but no problems, works as expected!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great flight controller.
Works just fine, great price and easy to program. Very happy with this FC, no problems so far, I run Cleanflight on it with pwm, but no problems, works as expected!

This boards are really great if you are looking for tidy wiring and direct onnections. Be prepared to be able to solder though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This boards are really great if you are looking for tidy wiring and direct onnections. Be prepared to be able to solder though.

Great Flight Controler!

I had a cc3d atom before, i flashed both of them to cleanflight and flew them in the same copter, so i could compare them. At first I noticed, that the naze32 semms to work a lot faster! It connects much faster to my cleanflight software than my cc3d did before. I haven`t flown it for that long, but until know I could really recomend it! There had just been a little issue with setting it up, because my channel 1 was not the channel 1 in cleanflight and so on with the other channels, but I had that issue with my cc3d before too, so Iam not sure if it?s not cleanflight?s fault.

All in all pretty nice product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Flight Controler!

I had a cc3d atom before, i flashed both of them to cleanflight and flew them in the same copter, so i could compare them. At first I noticed, that the naze32 semms to work a lot faster! It connects much faster to my cleanflight software than my cc3d did before. I haven`t flown it for that long, but until know I could really recomend it! There had just been a little issue with setting it up, because my channel 1 was not the channel 1 in cleanflight and so on with the other channels, but I had that issue with my cc3d before too, so Iam not sure if it?s not cleanflight?s fault.

All in all pretty nice product.

eine der besten fc am Markt gnstig und gut

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

eine der besten fc am Markt gnstig und gut

Epic control board. I previously have had two kk2 boards and haven't been happy with them and had to get refund from hobby king twice and had great customer service. I then bought this board having seen that flite test uses this board. Has great control and better programming than kk2. For me it was very easy to use after watching flite test's setup videos stuff. The auto level isn't yet setup perfectly but the manual mode is good enough and very stable. Well worth buying and a great little fight control board.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Epic control board. I previously have had two kk2 boards and haven't been happy with them and had to get refund from hobby king twice and had great customer service. I then bought this board having seen that flite test uses this board. Has great control and better programming than kk2. For me it was very easy to use after watching flite test's setup videos stuff. The auto level isn't yet setup perfectly but the manual mode is good enough and very stable. Well worth buying and a great little fight control board.

great FC for acro, you only need to short the boot-pin to flash your favourite firmware

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great FC for acro, you only need to short the boot-pin to flash your favourite firmware

Very good flight controller! I use it for a 210 mini quad, it is much, much better, more precise than the KK2 board, I had before. It is also very cheap for the value. I use it with cleanflight, and I think it is perfect! My only downside is the USB connector is on the back, not on the side, so it's not so easily accessible, but that's all.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good flight controller! I use it for a 210 mini quad, it is much, much better, more precise than the KK2 board, I had before. It is also very cheap for the value. I use it with cleanflight, and I think it is perfect! My only downside is the USB connector is on the back, not on the side, so it's not so easily accessible, but that's all.

Love this nice board on my x525 quad... I use it with CleanFlight added a simple NMEA ttl GPS on 57600 and 5Hz for FPV OSD only (not for GPS based flight modes) bought at banggood. This version is simple without Baro or Magnetometer, but for learning and enjoying FPV flying with some soft 3D moves it is a great choise. This board is revision 5, but good as much as version 6... see or feel no difference in flight at all.



Bye

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love this nice board on my x525 quad... I use it with CleanFlight added a simple NMEA ttl GPS on 57600 and 5Hz for FPV OSD only (not for GPS based flight modes) bought at banggood. This version is simple without Baro or Magnetometer, but for learning and enjoying FPV flying with some soft 3D moves it is a great choise. This board is revision 5, but good as much as version 6... see or feel no difference in flight at all.



Bye

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Customer files
CLI Variables Download [63]
Naze Basic Download [566]
Naze32 manual Download [341]
Graupner HoTT Telemetrie 2 Download [359]
Graupner HoTT Telemetrie 3 Download [2191]
Graupner HoTT Telemetrie 1 Download [534]
No File Name Download [590]
Thanks HK Download [3737]
Updating Download [724]
Updating parts Download [12]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save