New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Tous les métaux Servoless 90 degrés Retract pour les grands modèles (10 ~ 12 kg) w / 10mm Pin

Tous les métaux Servoless 90 degrés Retract pour les grands modèles (10 ~ 12 kg) w / 10mm Pin

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

27,05 €
Statut:
En stock.
Poids
209 g
SKU:
225000022
WANT FREE SHIPPING? Click here to find out more!

Full Metal Servoless Retract pour les grands modèles. Caractéristiques toute construction métallique pour la précision, la fiabilité et la durabilité. Ceci en fait une excellente alternative fiable à l'air et les systèmes de rétractent exploités mécaniques sur des modèles plus grands!

Spécifications:
Tension de fonctionnement: 4.5 ~ 7.4V
Support de plaque Dimensions: 52mm x 43mm
Vis Espacement des trous: 43mm x 31mm
Profondeur: 32mm
Longueur: 92mm
Pin: 10mm
Poids du modèle Max: 10 ~ 12 kg
Poids: 177g

  • UGS 225000022
  • Brand -
  • Capacité ( mAh ) -
  • Poids (g) 209.00
  • Longueur 105.00
  • Largeur 50.00
  • la taille 65.00
  • Electric Retracts
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

J'ai commandé 2 pièces et une des deux ne fonctionne qu'une fois sur trois, le problème est purement électrique ou électronique.
Dommage car la construction mécanique me semblait correcte.

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

J'ai commandé 2 pièces et une des deux ne fonctionne qu'une fois sur trois, le problème est purement électrique ou électronique.
Dommage car la construction mécanique me semblait correcte.

Very well built and strong retract however I only have 6 landings on them with a 13lb plane on one landing I had to turn hard and fast to keep from going into tall grass and bent a set of robart struts but "didn't damage" the retracts. travel speed is very slow and smooth. Down position is very solid. Time will tell but from how they are holding up so far excellent retracts and cant beat them for the price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very well built and strong retract however I only have 6 landings on them with a 13lb plane on one landing I had to turn hard and fast to keep from going into tall grass and bent a set of robart struts but "didn't damage" the retracts. travel speed is very slow and smooth. Down position is very solid. Time will tell but from how they are holding up so far excellent retracts and cant beat them for the price!

Very strong and rigid.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very strong and rigid.

Auf den ersten Blick macht das Fahrwerk einen guten Eindruck. Dann habe ich mal das Fahrwerk beim Einfahren mit einem Bleistift blockiert und festgestellt, dass es nicht abschaltet. Es fliesen mehrere Ampere Strom, bis der Akku leer ist, oder die Elektronik durch brennt (Ich habe natrlich nicht solange gewartet und nach ca. 20 Sekunden abgeschaltet). Aus diesem Grund habe ich bei Einbau darauf geachtet, das es nirgends anschlgt und auch einen extra Akku verwendet.
Nach dem ersten Einsatz im Modell hat sich die Montageplatte verbogen. Mein Modell wiegt ca. 9.5kg. Vielleicht war eine Landung nicht perfekt. Ich werde mir jetzt neue Platten aus 3mm Stahl anfertigen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Auf den ersten Blick macht das Fahrwerk einen guten Eindruck. Dann habe ich mal das Fahrwerk beim Einfahren mit einem Bleistift blockiert und festgestellt, dass es nicht abschaltet. Es fliesen mehrere Ampere Strom, bis der Akku leer ist, oder die Elektronik durch brennt (Ich habe natrlich nicht solange gewartet und nach ca. 20 Sekunden abgeschaltet). Aus diesem Grund habe ich bei Einbau darauf geachtet, das es nirgends anschlgt und auch einen extra Akku verwendet.
Nach dem ersten Einsatz im Modell hat sich die Montageplatte verbogen. Mein Modell wiegt ca. 9.5kg. Vielleicht war eine Landung nicht perfekt. Ich werde mir jetzt neue Platten aus 3mm Stahl anfertigen.

Excellent retracts. Solid and function well. I drilled the trunion to 10 mm i.d. to take standard oleos of 12 kg models. I will buy some more

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent retracts. Solid and function well. I drilled the trunion to 10 mm i.d. to take standard oleos of 12 kg models. I will buy some more

I had bought two pieces for my Gleichauf F-16. For the front retract I used a mechanical one with an RG Futaba servo. For power I could use a separate NiMh battery or a lipo with a voltage regulator. When I tried the main HK retracts sometime were working perfectly and some other don't. Finally both retracts stopped working without any reason. It didn't burned anything , just stopped working. I tried to buy new PCB but these are out of stock. And I didn't even fly the F-16 for the first flight. I decided to buy a new pair retracts and some kilos of new RCB when these would be in stock again hoping for the best. { All electric retracts could be burned. I had bought two new Lado retracts about 120 Euros each and the first one were burned at the third time without even fly my Hellcat 120 for the first time. But Lado has a perfect service. This is the difference.}

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had bought two pieces for my Gleichauf F-16. For the front retract I used a mechanical one with an RG Futaba servo. For power I could use a separate NiMh battery or a lipo with a voltage regulator. When I tried the main HK retracts sometime were working perfectly and some other don't. Finally both retracts stopped working without any reason. It didn't burned anything , just stopped working. I tried to buy new PCB but these are out of stock. And I didn't even fly the F-16 for the first flight. I decided to buy a new pair retracts and some kilos of new RCB when these would be in stock again hoping for the best. { All electric retracts could be burned. I had bought two new Lado retracts about 120 Euros each and the first one were burned at the third time without even fly my Hellcat 120 for the first time. But Lado has a perfect service. This is the difference.}

very good quality, I good hard landing and broke retract mountain but the retract still with no damage, I use it in 55 Zero about 9 kg , if you have problem with size of the pin, just you reform it by turning.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good quality, I good hard landing and broke retract mountain but the retract still with no damage, I use it in 55 Zero about 9 kg , if you have problem with size of the pin, just you reform it by turning.

DISREGARD MY EARLIER NEGATIVE COMMENTS. I HAVE FOUND THAT THE DIE CAST MUCK METAL IS TAKING A LOT OF PUNISHMENT ON A 6k MODEL TURNED DOWN TO ACOMODATE A 6M PIN AND SO FAR IS THE ONLY TURNIGY RETRACT I WOULD BUY AGAIN FOR A 7K MODEL.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

DISREGARD MY EARLIER NEGATIVE COMMENTS. I HAVE FOUND THAT THE DIE CAST MUCK METAL IS TAKING A LOT OF PUNISHMENT ON A 6k MODEL TURNED DOWN TO ACOMODATE A 6M PIN AND SO FAR IS THE ONLY TURNIGY RETRACT I WOULD BUY AGAIN FOR A 7K MODEL.

Don,t waste your money on this. the 10 m shaft is plain steel not tempered .The rotating retract block is die cast and has already cracked from tightening the allan lock screw. the die cast pivot pin is hollow and ready to shear off at the first landing. Yet again I have wasted my money on a turnigy product that is clearly designed to fail. to cope with a 10kg model this part should be steel

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Don,t waste your money on this. the 10 m shaft is plain steel not tempered .The rotating retract block is die cast and has already cracked from tightening the allan lock screw. the die cast pivot pin is hollow and ready to shear off at the first landing. Yet again I have wasted my money on a turnigy product that is clearly designed to fail. to cope with a 10kg model this part should be steel

Very pleased. These retracts are smooth and reliable. They look very scale on 4.8v. No more airleaks for me! Easy to fit in my HK 50cc Texan with some mods to the airframe.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very pleased. These retracts are smooth and reliable. They look very scale on 4.8v. No more airleaks for me! Easy to fit in my HK 50cc Texan with some mods to the airframe.

  1. 1
  2. 2
Customer files
Alum Retract Dimensions Download [158]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!