Tous les métaux Servoless 90 degrés Retract pour les grands modèles (6kg) w / 12.7mm Pin

• Overall
• Quality
• Value

Ok

May 14, 2021

Molto resistenti e ben fatti

• Overall
• Quality
• Value

Retract

Oct 02, 2020

Good quality at a great price. The gearbox seems to be a little fragile (one of the first set failed) but generally seem to work well.

• Overall
• Quality
• Value

These units appear to be very well engineered

Sep 24, 2020

One of the ordered units gear box failed so reordered retracts. overall the units are well engineered and constructed and work well.
the voltage range is a little low at 4.8-7.4 volt when most receivers work at 9 volts requiring the use of either a lower voltage receiver battery or a second battery for the retracts. overall I am happy with the product

• Overall
• Quality
• Value

Retract for Large Models

Jul 19, 2019

This retract head works great, very well made, quiet operation and strong. Well done and a great value. Order 2 as the default is a single piece

• Overall
• Quality
• Value

Failure rate

Nov 28, 2018

During my first bench test, one unit worked and one unit failed. Considering how long it takes to receive these items, I'm expecting the warranty claim will be quite a challenge.

• Overall
• Quality
• Value

Customer Rated

Aug 09, 2016

Purchased two units. Put them both on a servo tester and one unit failed after 3 cycles. The other one is still OK. It appears to be a weakness in the circuit board as the motor will still operate if partially disassembled. It just won't reverse. Poor quality control Hobbyking.

• Overall
• Quality
• Value

Customer Rated

Dec 07, 2014

These looked good on paper, and felt good in hand. They operate decently - until I put a robart strut @180mm and a 5" wheel on them. Both retract units stripped the gearing on the first activation. My sense of humor is bent pretty badly.

These appear to be solid on the surface - but the gear train is not sufficient to work with Giant Scale tires.

• Overall
• Quality
• Value

Customer Rated

Jun 06, 2014

Very poor quality . The gear failed at first test with no load.Is only an impression of strong built in fact is a very weak mechanism.

• Overall
• Quality
• Value

Customer Rated

Apr 07, 2014

POOR QUALITY. Bought one for a front wheel on a PC21. Could make it operating twice at workshop then BURNED OUT ...
Seems end sensor in retract position faulty ...
Attractive price is only quality for this item ...

• Overall
• Quality
• Value

Customer Rated

Feb 28, 2014

Listed dimensions are mostly accurate. Top plate is 59mm x 42mm, 35mm tall overall. Base is 27.5mm wide and 89mm long, including the motor. Retracts do not change position at power up, regardless of switch position, so your plane won't drop to the round when you switch on your receiver. Each unit weighs 142g.

Very strong. Tested with a 2S life powering the receiver... I have not been able to trip the overload protection by hand ... I'd probably have to jam them with a screwdriver!

Bought a pair of these and one of the 100-degree units. I' hoping they'll fit my ESM DO-335...