Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Aluminium Gyro Mont Upgrade Trex 550

Generating Links

Aluminium Gyro Mont Upgrade Trex 550

Prix:

Now save économisez 0,00 € 0,00 €

9,78 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
HKG0003A
Livraison gratuite? Cliquez ici pour apprendre plus!
Aluminium Gyro Mont Upgrade Trex 550

Ceci est un aluminium gyroscopique de haute qualité monture mise à niveau pour le Trex 550.

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

luca.pax | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 11, 2013

ciao



pezzo di alluminio da montare nella parte frontale dell'elicottero



originariamente in quel punto sui trex c' montata una barretta di metallo



utile soprattutto per montare i servi pitch e ail



consigliata



fatta abbastanza bene



se potete lucidarla diventa bellissima



ciao ciao



luca



beenfly'n | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 12, 2013

Very nicely machined upgrade for the Trex 550. Very light, as it is cut away underneath. Would have been better if it was a little taller, so it was flush with the top of the frame, and left more room for the servo lead rubber protector.

evltoy | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 09, 2013

Quality of this plate is very good. It would aid in stiffing the frame and making life easy to not having to remove gyro from tape every time you take the boom box out. Also with this installed above boom box you have your gyro hidden away in a crash. I also installed one to replace the CF plate for the rx (under tail servo).



This part I got was from OMGheli. I found that I had to file my slots longer on the frame as the mounting holes on the plate are a little too close together.

fpn57 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 04, 2012

Fits perfecrtly in front of the rotor mast, there is enough room for the servo wires and it looks cool. I have used it as a frame stiffner as I keep the Gyro to the rear of the rotor mast. The now no longer used brace it replaced I moved to the holes below the main drive gears to give extra stiffness there.

fpn57 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 02, 2012

Good quality and value, have not fitted it as yet but should not be a problem, should give the frame extra stiffness which is not a bat thing with the 550e.

jockstrap | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 10, 2012

Received mine today - it actually does have that mark (scratch) on it as it's probably the path the cnc machine took and goes a little deeper/higher there.. it's very slight but shows up a lot in the photo..



You can barely feel it by finger so once gyro tape is down it will make no difference.. a pity seeing it's the only negative i can put on it for the price..



Seeing the servo wires point up on the 550 - there is little room between the servo and the mount so you need to bend the wires a lot - getting a strap under for the gyro would be hard..



I'm using it as a frame stiffner as the 550 frame is weak near the front 2 servos so this mount works well for me... and quite cheap compared to other brands..

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!