Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Ange 920 RC Voilier 1840mm (Plug and Sail)

Generating Links

Ange 920 RC Voilier 1840mm (Plug and Sail)

Prix:

Now save économisez 0,00 € 0,00 €

135,75 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
113000052-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Prenez une pause de la norme, asseyez-vous et donner voiliers RC un essai. Ne pas se tromper dans penser voiliers sont lents et ennuyeux. Dans une brise raide, ils peuvent être extrêmement rapide et effectuer des virages rapidement, prouvant à être très excitant. HobbyKing vous l'Ange 920, apporte la meilleure façon d'entrer dans le monde passionnant de voiliers RC.

L'Ange 920 voilier vient plug and voile prêt. Il suffit d'installer votre propre 2 canaux radio surface, l'assemblage final complet et aller! Modelé océaniques yachts de course, la coque de l'Ange est moulé en fibre de verre composite avec un gelcoat parfait et émail vibrant fini peint. Soutenir la voile colorée imprimée nylon rip-stop est un mât robuste en aluminium. Tous les éléments requis sont installés, y compris voile treuil, direction assistée, gréement, voile et matériel. Protéger vos appareils électroniques coûteux est une trappe résistant à l'eau, caché derrière une cabine de passagers faux. Habillez le modèle sont quelques détails à grande échelle comme le volant et rails de plate-forme.

La quille lestée stabilise l'Ange, même dans une brise raide, mais elle va continuer dans des vents plus légers aussi. Si vous envisagez de naviguer principalement dans des vents forts, la quille pondérée a une cavité creuse qui vous permet d'ajouter ballast supplémentaire si vous le souhaitez.

Laisse la tête au quai et voir ce qu'elle peut faire. Un après-midi d'été chaud, il n'y a rien comme assis à l'arrière, se détendre avec une boisson froide et éprouver le frisson de la voile l'Ange 920.

Caractéristiques:
• Plug and Sail - Installer votre choix de récepteur et la batterie
• coque en fibre de verre moulé
• Belle finition brillante peinte
• Brillamment imprimés rip-stop voiles en nylon
• gouvernail pré-installé et voile servos de treuil
• quille amovible
• affichage en bois inclus
• mât en aluminium

Spécifications:
Longueur: 920mm
Hauteur: 1840mm
Largeur: 200mm
Area of Sails: 0.40m2
Projet de la ligne de flottaison en bas de la quille: 350mm
Rig Hauteur de la plate - forme vers le haut du mât: 1400mm

Obligatoire:
2+ émetteur et le récepteur de canal
4,8 ~ batterie de récepteur 6.0V

  • Angel Sailboat
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Toylander | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2016

Excellent introduction into the world of sail boats, at a very reasonable price, just add your own receiver, an rx battery and ballast the bulb and you will be sailing in no time. It does what it says on the box. Given my first one, now bought a second one so we can have races.

Once you know what you are doing you can upgrade the rigging and fittings, the only mod i would make straight out of the box is the mast joiner, i made one from hard wood 150mm long to stop the wobble.
You will need about 1500 grams of the smallest lead shot you can get and some resin , i used acrylic with worked well but takes a long time to set.

Greg | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 09, 2016

Having had this boat for a few months now, here are my comments. The hull is excellent, well moulded and stiff. The keel bulb can take about 1.4kg of lead shot which I kept in place by pouring epoxy into the bilb. The keel fin is very flimsy and bends sideways alarmingly when the ballast is attached. I made a new fin from Douglas fir sheathed in glass cloth - much stiffer. The joiner for the two piece mast is too short and gives no rigidity to the join. I replacd it with a 6" length of wood shaped to fit inside the mast. I replaced the rigging with wire and turnbuckles and replaced the rubbish spreaders with a single set of proper spreaders at half height plus a set of lower shrouds. I also replaced the mast crane with a longer one. With a decent rig, the boat sails pretty well. The winch has too much travel and I only need half the movement of my transmitter stick to go from fully in to fully out. I am thinking of making a new mainsail as the stock one does not set at all well. Overall, good value for money but it does need some fettling to get the best from this boat.

novembre | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 10, 2014

First navigation, just great, virtually no wind but already good speed.
I put 1,550 Kgrs Lead in the torpedo, it's perfect

Brett | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 03, 2014

Great new boat from the Shunbo Range, a good match for the Phantom. The wide beam and aft section of the hull gives it the most modern shape of the fleet, and longer nose section in relation to the Jib gives it more stability downwind. As with all the range several mods are required to make this a reliable craft, such as adding internal foam buoyancy (sinking prevention), waterproofing the 2 Servos, adding 1.6kg or more lead ballast. The plastic mast crane needs to be replaced with one that extends 80mm rearwards so the backstay clears the Mainsail. (see file section for photos). Optional mods include replacing the plastic chainplates with 3 position alloy ones. With a 3S 800mah LiPo and UBEC supplying power, I get 8hrs run time. Consider getting a spare Monsoon Mast and Sailset to run as a smaller "B" rig in heavier (12 knots) conditions. See Shipshape RC for lots more information.

pilotoheavy | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 31, 2014

va arribar amb la cabina i tapa dels servos trencada. d'origen i no per el transport. construccio fora matusera

David | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 26, 2014

just set this boat up (07/24/2014). this is my first and must say It is very nice boat, so nice it may never see water only cause it is a very impressive piece to look at.

mxhead692 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2014

Boat comes well packaged and looks great, however, there was supposed to be a plug in a small hole in the stern (my cousin also bought one, his has the plug in it!), I didn't notice the hole, boat filled about halfway with water when I tested the boat in a swimming pool for about 15 minutes, and now the winch servo is TOAST! Servo has an O-ring so it's SUPPOSED to be waterproof, or at least water resistant, but it's not! Only replacements are in 'international' warehouse so shipping cost would negate any savings over a $50 Hitech servo. Not a happy sailer here Hobby King!!!

bill987 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 03, 2014

Bien emball. Tout simplement superbe navigue trs bien mme par gros temps

Fichiers clients
No File Name Download [42]
No File Name Download [100]
No File Name Download [54]
Manual Download [18]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires