Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Assault Kit d'hélicoptères 450L Flybarless 3D

Generating Links

Assault Kit d'hélicoptères 450L Flybarless 3D

Prix:

Now save économisez 0,00 € 0,00 €

109,05 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9155000263-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Le kit de montage 450L Assault fait suite à la gamme déjà très populaire d'assaut 450 hélicoptères. Il dispose d'une gamme de pièces améliorées et modernisées tout en conservant la functionalilty et la qualité que vous attendez de cette superbe gamme d'hélicoptères. Encore plus de ceux fantastiques pièces usinées CNC en aluminium avec un grand nombre d'entre eux anodisé un accrocheur vert.

Certaines de ces caractéristiques améliorées sont les suivantes:

• pignon hélicoïdal et l'engrenage d'entraînement principal pour slop réduite et l'usure
• poutre de queue plus longue (385mm), ceci est 40mm plus longue que les versions antérieures
• grand diamètre du rotor principal (accepte jusqu'à 360mm pales du rotor)
• Diamètre du rotor arrière Agrandir (67mm lames de queue)
• cadres latéraux Re-conçu et amélioré carbone
• La queue est tube de couple entraîné pour une meilleure réponse de la queue
• Autres pièces sont usinées CNC en aluminium et moins sont moulés en nylon
• Amélioration de la tête de rotor et d'un système de plateau cyclique
• Entièrement usiné CNC rotor arrière boîte de vitesses à pignons coniques nylon
• montage CNC moteur en aluminium usiné
• plateau coulissant de la batterie de libération rapide

La liste est longue et sont trop nombreux pour être cités ici, mais il est encore un qui est un peu différent, le 450L a une CNC servo arrière montage monté entre les cadres principaux dans le cadre du tailboom. Ce raidit le cadre à ce point et donne aussi une belle liaison directement à la queue. Il a également été fait assez grand pour transporter les légèrement plus grandes et plus fortes queue servos qui sont sur le marché aujourd'hui.

Spécifications:
Type: Pitch flybarless hélicoptère 3D
Rotor principal Diamètre: 755mm
Queue Diamètre du rotor: 175mm
Main Gear: 130T
Pignon: 11T
Principal Gear Ratio: 11,82
Longueur: 765mm
Hauteur: 205mm
Poids: 410g (monture seulement)

Compris:
Assault kit de montage 450L
pales du rotor de queue
caddy de support de lame
Serre-câbles et le matériel de montage
pignon moteur hélicoïdaux (de 11T)
Manuel de l'Assemblée

Obligatoire:
mini-servos couple métalliques 3 x haute orientées (longueur max 24mm)
1 x grande vitesse du rotor de queue servo (longueur max 36.5mm)
système 1 x Flybarless
1 x 450 taille du moteur d'hélicoptère brushless (1700 ~ 2100Kv)
batterie 1 x 2200mah 3S LiPoly
1 x 40 ~ 60 Ampères ESC
1pr pales de rotor principal (max 335mm)
1 x Emetteur et récepteur 6ch
1 x Chargeur pour batteries 3S Lipoly

NOTE: Pour obtenir une liste complète des pièces de rechange , cliquez ici

  • Assault 450L Helicopter
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Rod | Acheteur vérifié

  • Overall
  • Quality
  • Value

Be careful!

Apr 06, 2018

I got mine for AU$70, so I can't complain to much. Most of the components are of reasonable quality. My advise would be to check EVERYTHING before you fly it. It comes pre-assembled, presumably by people who have no idea what they're doing. Loose bolts, jammed bearings, no grease, poor gear mesh... C'mon hobbyking, these should be kits, so people can be responsible for their own build. Anyone who risks flying this without rebuilding properly it is in serious danger...

Tim | Acheteur vérifié

  • Overall
  • Quality
  • Value

Very good for price

Mar 27, 2018

Very good kit and great price too, the parts are quality and flies well!
There are a couple of minor issues i had:
1. On mine the front torque tube gear needs shims to get rid of the vertical play otherwise gear is able to move away from the other gear and the tail stops turning, or the gears are stripped.. u can use 5x10x0.1mm or 6x12x0.1mm shims both will do the job
2. The tail sits low and same issue getting caught in even short grass and stripping torque tube gears again :D... solution is to buy the align 470l dominator skids - they will fit directly and they have a rake on them (shorter at front that at back) which points the node down slightly and lifts the tail off the ground by about 3-4cm. A definate improvement on the 450l
Overall would have no problems buying this again!

Antonino | Acheteur vérifié

  • Overall
  • Quality
  • Value

assault 450 l

Jan 06, 2017

ho appena ricevuto il kit spedizione puntuale imballo perfetto molte parti assemblate materiali di ottima qualità

michel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Overall a good Heli.

Dec 03, 2016

Bought and build this Heli last week and overall a good Heli but has a few flaws.
One of its flaws is the quality of the aluminum. In my case it was in the swashplate and the anti rotation bracket.
In both cases the threads in the aluminum where completely gone after putting in the screws 2 times. In the case of the swashplate if i hadn't seen it a crash during the maiden was a sure thing.
But other than that it's a good Heli. Flying it with Rotorstar main blades and they don't disappoint me. Together with the turnigy s306g-hv servo's on swash and tail make it a well balanced setup. Only "brand" stuff I got on it are align esc ,motor and a beastX plus.
But a good Heli for a fair price only thing is getting used to the new battery tray system.

Memphis Eddy | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 12, 2016

Dont waste your $ on any other 450 kit. I did and just found this 450L is way way superior kit. Why? Canopy is FG. Frame is assembled and even the frame sharp edges are smooth. Shipping was 4 days and low cost. So 6s or 3s build is up to you. What a nice kit @ 1/3 the cost.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 31, 2016

Couldn't wish for better. It's fantastic value and quality.

LikarD | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 24, 2016

Have assembled it and have to say it is much better than older 450 PRO helis. Great improvement from GARTT production... The only "problem" that isn't realy a problem but a must do is mesh well all TT umbrella gaers with apropriate shims to make them fit well, but not too tight eather - like all gears in general... All the rest was OK, use threadloch everywhere and grease on thrust bearings main head grips and tail grips as well. Wil tell more after first few flights... Bye

Chris | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 01, 2015

Finally got this bird up in the air and after building it and flying I can say the quality is great. Everything fit together nicely. I always pull all the screws out of the preassembled parts and they were mostly thread locked so I probably would have been ok not doing this. flying was perfect, I didn't have to adjust anything after the 1st flight, everything was just spot on after setup on the bench. I used the ZYX - S2 and it held solid. This is a quite a difference from the HK kits on this site as I had to buy a lot of Align parts for the tail and a new swash as its quality was quite poor (RIP).

LeoTrex | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 11, 2015

il miglior elicottero classe 450 lavorazione perfetta piccolo neo viti un po deboli e alcune con testa torx

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 31, 2015

good I like it was abit battered by the post but all parts were ok

  1. 1
  2. 2
Fichiers clients
CC3d Download [3551]
Manual Assault 450L Download [6038]
Manual Assault 450L Download [6038]
Satho Assault 450L 6S Setup Download [52]
Satho Assault 450L 6S Setup Download [48]
Satho Assault 450L 6S Setup Download [58]
Satho Assault 450L 6S Setup Download [59]
Satho Assault 450L 6S Setup Download [65]
WayToMountThrustBearings Download [133]
Manual Assault 450L Download [6038]
  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires