New Items Actus Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

ASW 28-18 2.53m Kit AMS Echelle Planeur w / UltraDetail Pilot et Cockpit

ASW 28-18 2.53m Kit AMS Echelle Planeur w / UltraDetail Pilot et Cockpit

Shipped From:
  • USA
  • Global
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
ASW282-5CPKIT
WANT FREE SHIPPING? Click here to find out more!

Le AS28-18 est un 18m construit envergure planeur de performance monoplace allemande conçue autour des caractéristiques de manipulation superbe sur le AS28 original (15m aile d'envergure). Notre Kit AS28-18 a pris glisse à grande échelle à un nouveau niveau avec un fuselage en fibre de verre et construit la construction de l'aile plis / balsa avec un tube d'aile en fibre de carbone et un système de rétention facile cintrées pour les ailes qui feront installer un composant logiciel enfichable prochaine fois que vous êtes prêt à prendre le ciel.

L'attention étonnante au détail est évident dans les grands tableaux de bord pilote très détaillé et le cockpit comportant et un détail des leviers de commande et les boutons.

Avec les grands volets de travail ce modèle peut être piloté et a atterri dans des zones relativement petites, plus, le modèle peut être installé dans une configuration traditionnelle de rabat / aileron ou une configuration Quadro-flap pour un contrôle supplémentaire et l'effet de rupture.

Vous aurez besoin de 5 servos d'ailes minces, 2 pour chaque aile et un pour l'ascenseur tandis que le gouvernail peut être utilisé avec un servo standard. Vous aurez également besoin d'un émetteur-récepteur (Tx / Rx) et la batterie.

Caractéristiques:
Envergure: 2530 m (99.60 ")
Longueur: 1170mm (46 ")
Wing Zone: 28,5 dm2
Wing Airfoil: HN 3012
Voler Poids: 1,4 kg (50 onces)

Obligatoire:
5 x Slim Wing Servo
1 x servo standard
Rx et Tx avec batterie récepteur

  • UGS ASW282-5CPKIT
  • Brand -
  • Capacité ( mAh ) -
  • Poids 3366.0000
  • Longueur 1200.00
  • Packaging Width 185.00
  • la taille 320.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

For the price it's a good value. Be aware of several issues. The largest issue is that wings have zero dihedral! None, flat as a board. The prototype had dihedral. I do not expect this model to fly well and the lack of dihedral cannot be modified without a lot of work, i.e. new wings.

As others have noted, one winglet is twisted and slants inward too much. Don't use a heat gun as suggested, way too much heat. Instead use some very hot water.

Also the fin is not perpendicular to the wings, again some warm water and gently twisting of the boom will fix this. Then reinforce the tailboom/fin area with some FG to resist cracking.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the price it's a good value. Be aware of several issues. The largest issue is that wings have zero dihedral! None, flat as a board. The prototype had dihedral. I do not expect this model to fly well and the lack of dihedral cannot be modified without a lot of work, i.e. new wings.

As others have noted, one winglet is twisted and slants inward too much. Don't use a heat gun as suggested, way too much heat. Instead use some very hot water.

Also the fin is not perpendicular to the wings, again some warm water and gently twisting of the boom will fix this. Then reinforce the tailboom/fin area with some FG to resist cracking.

beautiful ARF unfortunately Hobby Kings quality control is lacking.
The tail boom is cracked along the top and broken on the left and right side
of the cracked section. I have contacted customer service, hopefully they will make it right.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

beautiful ARF unfortunately Hobby Kings quality control is lacking.
The tail boom is cracked along the top and broken on the left and right side
of the cracked section. I have contacted customer service, hopefully they will make it right.

Guys I am having serious problems about weight. Today I had a great wind and could not get a lift on a perfect slope. Some days ago I tryed on a very strong wind and also it dived. I am using a lot of lead weight to get it balanced, and there is no weight to get off from back. Any solutions? I am posting a video now. Besides the weight problem, it is a superb model, very beautiful, great even for static but I will fly or crash it flying. Regards.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Guys I am having serious problems about weight. Today I had a great wind and could not get a lift on a perfect slope. Some days ago I tryed on a very strong wind and also it dived. I am using a lot of lead weight to get it balanced, and there is no weight to get off from back. Any solutions? I am posting a video now. Besides the weight problem, it is a superb model, very beautiful, great even for static but I will fly or crash it flying. Regards.

Received this model today. All looks OK so far but same as a lot of complaints on HK China reviews for this model, no instructions in box. I think it is manufactured by FlyFly hobbies in China. PDF instructions available here:-
http://www.flyflyhobby.com/downloadsfront.do?method=picker&flag=all&id=c043e8de-51af-4d82-97f3-aeaa532424c8&fileId=22033dc4-2214-45d4-9057-c1c24fa3f59d&isDownloadPermissions=none
Copy and paste in to your browser.
All fus items and harware pack seems the same but no flaps.
Everything else looks the same, wing span, length, wing loading, Wing area, weight.
The other thing I have noticed is the fibreglass to the underside seems very thin and I would recommend reinforcing as will take some stick when belly landing.
Will add more as I build if I find any thing else that may be helpful.
Andy.


verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received this model today. All looks OK so far but same as a lot of complaints on HK China reviews for this model, no instructions in box. I think it is manufactured by FlyFly hobbies in China. PDF instructions available here:-
http://www.flyflyhobby.com/downloadsfront.do?method=picker&flag=all&id=c043e8de-51af-4d82-97f3-aeaa532424c8&fileId=22033dc4-2214-45d4-9057-c1c24fa3f59d&isDownloadPermissions=none
Copy and paste in to your browser.
All fus items and harware pack seems the same but no flaps.
Everything else looks the same, wing span, length, wing loading, Wing area, weight.
The other thing I have noticed is the fibreglass to the underside seems very thin and I would recommend reinforcing as will take some stick when belly landing.
Will add more as I build if I find any thing else that may be helpful.
Andy.


FRP

8&#12

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

FRP

8&#12

Video Review.
I love this thing!
http://www.youtube.com/watch?v=8YnA5XO7jEo&list=UUNImGvx20PyH4zVMU4wkW6g&index=2&feature=plcp

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Video Review.
I love this thing!
http://www.youtube.com/watch?v=8YnA5XO7jEo&list=UUNImGvx20PyH4zVMU4wkW6g&index=2&feature=plcp

I received my ASW last week and am very impressed. Beautiful finish, all straight...I have been in the hobby for 40 years and I know that there is no possible way to build something like this for that little money.

I read other comments about poor alignment, no instructions bad hardware, etc etc...But personally i found none of this. (except the hardware which I will replace anyway).

The asw is by no means a beginners airplane. Experience is required. i can not comment on the flying yet since I have been installing servos and will report as I progress.


Again it is awesome value for 100 bucks.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received my ASW last week and am very impressed. Beautiful finish, all straight...I have been in the hobby for 40 years and I know that there is no possible way to build something like this for that little money.

I read other comments about poor alignment, no instructions bad hardware, etc etc...But personally i found none of this. (except the hardware which I will replace anyway).

The asw is by no means a beginners airplane. Experience is required. i can not comment on the flying yet since I have been installing servos and will report as I progress.


Again it is awesome value for 100 bucks.

Appareil fabuleux de qualit, La couture des deux coquilles du fuselage est totalement invisible L'entoilage des ailes du stab edt du volet de direction est parfait, pas une cloque ( vrifier au soleil ) Evidemment pas de notice !!! hlas ! Prix trs attractif pour une machine de cette qualit ! bravo HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Appareil fabuleux de qualit, La couture des deux coquilles du fuselage est totalement invisible L'entoilage des ailes du stab edt du volet de direction est parfait, pas une cloque ( vrifier au soleil ) Evidemment pas de notice !!! hlas ! Prix trs attractif pour une machine de cette qualit ! bravo HK

I know QC for some HK stuff is pretty bad but this is a nice example of a beautiful Fiberglass plane. Just as described. Arrived double boxed from USA warehouse. There is slight warp in the mold of the main body. The vertical stabilzer is a few degrees off 90. Hopefully this won't effect flight characterstics.
The finish is excellent and it arrived with what appears like all parts in tact. Controlled surfaces are pre hinged aside from the rudder. Everything looks to be of good quailty.
It's probably going to be a winter project so I put it together just to see what it looked like and now have it hanging on the wall in my living room. Beautiful!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I know QC for some HK stuff is pretty bad but this is a nice example of a beautiful Fiberglass plane. Just as described. Arrived double boxed from USA warehouse. There is slight warp in the mold of the main body. The vertical stabilzer is a few degrees off 90. Hopefully this won't effect flight characterstics.
The finish is excellent and it arrived with what appears like all parts in tact. Controlled surfaces are pre hinged aside from the rudder. Everything looks to be of good quailty.
It's probably going to be a winter project so I put it together just to see what it looked like and now have it hanging on the wall in my living room. Beautiful!

Hey did anyone get a manual? Where is the correct cg location? I figure the wing spar but people are picky. Does thd servo go in the tail or fwd section? Help a fellow flyer out here. ;)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hey did anyone get a manual? Where is the correct cg location? I figure the wing spar but people are picky. Does thd servo go in the tail or fwd section? Help a fellow flyer out here. ;)

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
ASW28 Glider Download [1226]
No File Name Download [54]
No File Name Download [436]
ASW converted to electric 2 Download [307]
ASW converted to electric 1 Download [548]
No File Name Download [440]
ASW282-5CPKIT Manual Download [440]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking