Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Atmel Atmega Socket Firmware Flashing outil

Generating Links

Atmel Atmega Socket Firmware Flashing outil

Prix:

Now save économisez 0,00 € 0,00 €

23,60 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
332000007
Livraison gratuite? Cliquez ici pour apprendre plus!

Cet outil de génie fait clignoter le Atmel Atmega MCU trouve dans de nombreux CES ou d'autres appareils utilisant Atmega processeurs une promenade dans le parc. Pas besoin de souder ou de créer pince lourde sur les appareils, il suffit de connecter l'outil clignotant prise à un dispositif USBasp AVR et placer la douille sur l'Atmel MCU exposée!

Unique et exclusif à HobbyKing cet appareil à portée de main deviendra un favori dans votre bricolage arsenal.

Caractéristiques:
Haute précision de point.
Une large gamme d'applications.
Rapide et facile, aucune soudure nécessaire.

Caractéristiques:
Précision de pointage: ± 0,05 mm
La force du ressort: [± 20%]
17,0 g (0,593 oz) à Voyage initial
40,0 g (1,418 oz) à 1.70mm (0,0669) recommandé Voyage
52.0g (1,827 oz) à 2,50mm (0,0984) Voyage complète
Socket: Phosphor Bronze / plaqué or
Plongeur: Hardened Béryllium cuivre / plaqué or
Barrel: Phosphor Bronze / plaqué or
Spring: Musique de fil / plaqué or
Logement: LG chem ABS-AF312
Longueur du câble: 420mm

A besoin:
USBasp AVR Programmation Dispositif pour possesseurs ATMEL

Suits les suivantes MCU:
Atmel Atmega8, ATMEGA48, Atmega88, Atmega168, Atmega328

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Ted | Acheteur vérifié

  • Overall
  • Quality
  • Value

Great Idea, Mediocre Execution

Feb 12, 2017

When I saw this tool listed in the comments of a YouTube video about upgrading super cheap ESCs to SimonK circa 2015, I fell in love with the idea. The unit is very well made and very slick looking. The pins even have a spring loaded property. However, programming Atmel chips was pretty hit or miss. The first 3 ESCs went OK with just a few re-attempts required. By the fourth ESC, the tool was shot. It took two days, several modifications to the tools, and about 50 attempts to get that last ESC programmed. Even then the tool was not steady enough to verify the write, but the ESC works. So the tool cost more per programmed ESC than the ESCs themselves. Next time I will just solder tiny wires to the Atmel chip.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 03, 2016

a must have for updating your ESC's and very easy to use

greenbigfrog | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 26, 2016

Very great and helpful tool! Get someone else to hit enter!

trevpez | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 11, 2015

poorly made managed to flash 4 ESC's. It stopped working. I thought I'll just replace it but the price has tripled. DON"T waste your money

T0RP3D | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 11, 2015

Really good flashing connector, easy to use and good quality, i recommend this to anyone!.. thanks HK!,

Veter | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 29, 2015

Expensive ... but I could not find anywhere else.

jan | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 21, 2015

My tool had a wrong pin connection !! ground pin was wired to wrong pin on usbasp header :( i had to cut the heatshrink and resolder to the correct pin.
Sending it back would have cost me more then repairing it myself. to bad....

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 19, 2015

great product, good instructional video

Naoki | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 03, 2015

Great product. Does exactly what it should do, used it to flash my spider opto 30A esc. No issues with flashing and it fit perfectly onto the chip. Don't forget to buy the adapter for the usb cable, you wont be able to hookup to your PC without it.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 28, 2015

Indispensabile per esc, turnigy multistar da flashare assolutamente.

Fichiers clients
No File Name Download [48]
Tool orientation Download [226]
flashing list Download [304]
Flashing your ESCs Download [4099]
List of compatible ESC's and hex files Download [250]
Atmel 6-10pin diagram Download [61]
10-6 Adapter Layout (Connect old 10p fla Download [85]
Setup on win 8.1 Download [0]
Picture of adapter pinouts with labels Download [76]
Picture of USBasp pinout with labels Download [97]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!