S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

AX 2308N 1100kv brushless Micro Motor

AX 2308N 1100kv brushless Micro Motor

QTY:

Now save enregistrer 0,00 € 0,00 €

5,77 €
Rating:
Stock:
Poids
50 g
SKU:
AX-2308N1100

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Description
du

AX-2308N-1100
Moteur sans balai micro
Livré avec support de bâton, comme le montre.

Usine Spec.
Kv: 1100rpm / v
Plage de Lipo: 2-3 cellules
Suggestion prop: 8x4 ~ 9x5
Meilleure gamme actuelle: 6 ~ 10A
Poids: 44g
Diamètre de l'arbre: 3mm


Stator: 23 x 8mm

Données de test.
Batterie: 11.5V
Courant: 9.7A
Hélice: 8x3.8
Thrust: 550g
Vitesse: 8520rpm

Product
Specifications

Informations supplémentaires

  • Référence:
    AX-2308N1100
  • Brand:
    Non
  • Poids (g)
    50.00
  • Longueur
    105.00
  • Largeur:
    29.00
  • Taille:
    80.00
  • Kv ( rpm / v)
    1100.00
  • Max Currents (A)
    10.00
  • (W ):
    0.00
  • Longueur B ( mm ):
    35.00
  • Longueur Can D ( mm )
    11.00
  • Max Tension (V)
    11.00
  • Arbre A ( mm ):
    3.00
  • Unit Weight (g):
    44
  • Diamètre C ( mm )
    29.00
  • Longueur totale E ( mm )
    64.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
this motor do not come with conector only solder ends. the mount is only via stick of 10mmx10mm.
Quality
Value
Overall
Quality
Value
Overall
so now that I've had this motor for a whole season, Ill finally write my review. This is a very nice motor. I've flown this with a 2 cell 500mah battery, 10amp ESC and 8x6 prop pulling approx. 300g at 8 amps. flight time of 13 mins. I've also used this with 3 cell 1000mah 15amp ESC and 9x5 and 9x7 prop pulling approx. 600g at 14amps both left the motor only ever slightly warm with a flight time of 10mins really cranking out some hard 3D. I do not recommend anything larger expecially for 3D. The stick mount heat sink makes for easy mounting. a piece of 3/8x3/8 basswood glued right to the plane.
Quality
Value
Overall
Quality
Value
Overall
This little motor coupled with a 12a Plush Turnigy ESC makes my Budlight Stick Flyer an all day floater and a joy to fly. The plane at 12.25 oz (350 gr) with a 1000 mah lipo seems to fly forever. The scratch built plane from trash recycling components is probably the least expensive rc plane possible. I used an 8.5 x 4.7 prop and it seems to keep the power requirement just right at 5 amps on a 7.4v battery and 9.5 amps on 11.1v.
Quality
Value
Overall
Quality
Value
Overall
I now have 5 of these not because they are defective but because its the best motor of this size I've ever run. As I said in another review , this motor has sealed ball bearings and really good wire harness. I recommend this motor be run with 3 cell lipo packs, it will produce about 2 times the rpm than a 2 cell pack. Here is some figures I've come up with testing this motor. Run time...10 min with 3 cell 1000ma lipo...17 min with 1500ma lipo. I have been using 12 amp Esc(hobby king) full power on all tests. Motor and esc bearly got warm, even at full power. The heat sink really helps to pull all the heat @ away from motor.
Quality
Value
Overall
Quality
Value
Overall
Strong Motor, copper windings looked neat and precise. Excellent thrust and when flying at half speed it's barely audible. Mounted it to my GWS Slow Stick and had a fun afternoon. Big difference coming from the old brushed 360 gear boxed motor it came with. ground take off into the air in less than 10 ft and didn't disappoint me once. The only issue I had is the long shaft, I prefer to use a prop saver for obvious reasons, so having to dremel off the extra length was an inconvenience but not enough to knock off any stars, that's part of the hobby doing your own mods.
Quality
Value
Overall
Quality
Value
Overall
This is an example why Hobby King is so good. I boutht 5 of them just to have spares. Thus motor is a lot higher quality than I expected, the way they kept the price down was to use a steel bell all the way around the motor(most have an an alloy head. This motor has 2 sealed ball bearings! Outstanding quality for a low price.
Quality
Value
Overall
Quality
Value
Overall
great motor, nice for mounting on plywood base with heatsink
Quality
Value
Overall
Quality
Value
Overall
Great item. Worth the price. Nice shiny finish. Wire quality is not bad at all. That product rocks my boat that's for sure ;)
Quality
Value
Overall
Quality
Value
Overall
got too of them and no problem with either one
Quality
Value
Overall
Quality
Value
Overall
Very nice motor for stick-mounting! This is the second one I've ordered. No problems at all with the first one, but I'm planning another build of the same plane and liked it enough to buy it again. Plus it was in the US warehouse, cheap, and didn't cost me any more in shipping!
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.