Prix total

0,00 €

Panier 0 Panier 0 Loading...

B-17G Liberty Belle EPO 1875mm (PNF)

Generating Links

B-17G Liberty Belle EPO 1875mm (PNF)

Prix:

Now save économisez 0,00 € 0,00 €

275,90 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
310000112
Livraison gratuite? Cliquez ici pour apprendre plus!

Ce B-17G a été acheté par passionné d'aviation Don Brooks, qui a formé la Fondation Liberté pour présenter le plan que le Liberty Belle. Restauration a commencé en 1992 avec des pièces provenant d'un autre endommagé B-17 (44-85813), interprété par Tom Reilly et société / Flying Tigers Warbird Museum Restauration (aka "Bombertown USA"), situé à l'époque au champ Kissimmee Gateway, Kissimmee, Floride . Elle est revenue à l'air le 8 Décembre 2004, et avait été tournée le circuit du spectacle aérien depuis.

Malheureusement, elle a été perdu dans la matinée du 13 Juin 2011, Liberty Belle a fait un atterrissage forcé dans Oswego, Illinois, après avoir décollé de Aurora Municipal Airport à Sugar Grove, Illinois. Peu après le décollage, le pilote d'un Texan chase plan T-6 a informé le pilote de Liberty Belle que l'aile B-17 intérieur gauche était en feu et a conseillé un atterrissage immédiat. Le kamikaze a atterri avec succès dans un champ voisin et les sept personnes à bord ont pu évacuer sans blessure, mais en raison du sol boueux les moteurs de feu ne pouvait pas atteindre ......

Cette énorme bouchon et voler B-17 rend hommage à Liberty Belle. Très simple et rapide à assembler, avec tous les servos et ESC de pré-installé. Il est fabriqué à partir de mousse EPO, de sorte qu'il est difficile que vous exepect et que l'aile 1pc est amovible, il est également pratique. Les escamote et roues électriques pré-montés sont assez grands pour faire face presque toutes les surfaces et avec beaucoup de puissance sur le robinet des quatre moteurs brushless filature accessoires de contre-rotation, lisses décollage de sont un jeu d'enfant, les volets pré-équipée fendus assurent que les débarquements sont également le théâtre libre.

Il y a beaucoup de détails à l'échelle sur l'offre, y compris les armes à feu et la balle tourelle, les Pratt & Whittney "moteurs", trois accessoires à l'échelle lame, travaillant navigation et atterrissage lumières et ainsi de suite. Nous avons effectué ce B-17 largement, il est facile à piloter et si gracieux, un prospectus d'échelle rêve, ce modèle dispose d'une présence réelle dans l'air et est appelé à devenir une étoile à votre aérodrome!

Spécifications:
Envergure: 1875mm
Longueur: 1350mm
Voler Poids: 2750g
Moteur: 4 x 700kv Brushless Outrunner Motor
Esc: 4 x 20A ESC
Servos: 6 x 9g Servo
Train d'atterrissage: Retracts électriques

Comprend:
Tous y-fils
La colle
Instructions
2 hélices de rechange
Leads parallèles pour ESC / Lipoly

A besoin:
Transmetteur Channel 7 et le récepteur
2 x 3S 11.1V 2200mAh ~ 3000mAh Lipoly Batterie

  • B-17G Liberty Belle
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Slowrider | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 05, 2015

awsom plane,at the ground or in the air no matter,looks and fly great,,some built time but all i all no problem,,love it

Sparrow | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jan 03, 2014

Ordered thru the Australian warehouse it arrived in good condition. Its an easy assembly and does not take very long. Taking advice from other reviews I ordered a full set of Master Airscrews at the same time. I fitted the standard blades & the very first time I ran the motors up one prop exploded from the hub damaging the engine cowling of the next engine.
My advice, DO NOT USE STANDARD PROPS. immediately replace with a full set of master props. Bear in mind there are absolutely no spare parts available for this plane except the crappy and potentially dangerous standard props. The total lack of spares will eventually be the undoing of what is actually a great aeroplane. One change I made when assembling was to mount the receiver fully connected then velcroed to the centre of the wing. I then cut out a large rectangular opening in the fuse where the wing sits to accommodate the receiver and wiring. This means I only have to connect two plugs to the receiver, elevator and rudder and feed the two battery leads into the cockpit area where the batteries live. Makes fitting the wings a two minute job and keeps all the wiring really neat and all on the wing, simple. To fit the replacement props I used TWO nuts tightened on the motor shaft. The prop goes on next with a third nut to tighten the prop on the first two nuts to locate it. The nuts form a tight fit into the pr

Reennie | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Nov 22, 2013

Received my Liberty Belle yesterday and assembled the basic airframe last night. Plane looks great and the finish is very nice. This thing is very big.... Will have to see how I get it to the field and back :-).

Quality of the parts look very good to me, off course I haven't flown it yet, but it looks and feels very good. Retracts work good to and look very sturdy. I'm planning on fitting them somewhat deeper in the nacelle (for looks), but for now this will do. During testing however one of the two was acting somewhat strange, but after a few tries it started functioning normally (it reversed once - after remainig in when I activated the retracts it came out when I retracted the other one after that it refused to work - I powercycled and the quirk disappeared). Motors look exactly the same as the motor for the Arttech spitfire, ESCs have 3A UBECs (that's what it says on the labels). During my testing the ESC became somewhat hot when there was no motor connected, so only powering the BEC and the retracts - maybe the retracts use a lot of juice and is that an explanation for the strange behavior.

All in all I think this is a great plane for a very nice price point. I'm going to spend some time to check everything and make it to my liking, but that's the point of the hobby.

My biggest minus for now is the main wing, it has no reinforcement whatsoever. Also no cavities for rein

alainvbelle | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Oct 24, 2013

The model looks impressive on the ground, has great presence in the air and is very realistic in flight. Plenty of power available, great sound from four props.

Dave | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Sep 28, 2013

I just got it in was less than 2 weeks and hell yea im excited about getting it in the air, ! question tho, is there a way to get the landing lights to STOP flashing and just stay on ?

Wholehog3 | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Sep 26, 2013

Just completed 5th flight and I am loving this plane. It took a day to assemble as I checked every part to ensure proper functionality. After reading other reviews I didn't try to use the stock props and used MAS props with parkzone spinners from the start. Looks just as great in the air as it does on the ground. Flies like a dream and is very easy to land. I am using 2 Turnigy nano-tech 2200mah 3S 25~50C Lipo Packs and get about 5 minuets flying time with 30 pcnt charge left and found you only need 1/2 throttle for a good scale flight. Excellent plane HK.

Neil | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jul 09, 2013

there are no "Live Chat" services. And my request is over 4 days old. Come on people how about some customer service.

Neil | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jul 07, 2013

When I received this aircraft it look great in the box with everything taped down. I managed to find a couple of lipos I also ordered buried in the box. Everything looked fine so the box was put away until my birthday, July 4, Really

Easy to put together. Instructions were fine. Plane looks great except there was no ball turret or guns in the box!!!! It seems when they put in the batteries they took out the ball turret and guns.

I have requested the parts two days ago and my request has not been assigned yet in their 24X7 support.

I expect them to send the parts without and issue. We will seen. Until then the maiden flight is on hold.

If they give good services on this issue I will increase my rating, but since they have not assigned the problem yet I am concerned.

Neil | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jun 11, 2013

I received my B-17 from USA warehouse in great condition. This plane is big. I also ordered replacement Master Airscrew 9X6X3 for imporved prop performance over 1/2 throttle.
So far things look good. I am creating space in my workshop to build. I would like to add pilots if possible.
I will update as the build / flights progress.

sglnichols | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jun 11, 2013

Maidened mine today with no problems. Needed no trim whatsoever and flies beautifully. Running MAS 9x7x3 props on 2 x 3S 2200. Got tops of 5 min flights. Will maybe try 4S 4000 next time. Had 3 more enjoyable sorties and very, very happy.Landings are a breeze and I found flaps not required at all.Looks great, flies great.Happy days.

  1. 1
  2. 2
Fichiers clients
No File Name Download [89]
No File Name Download [89]
No File Name Download [93]
No File Name Download [89]
No File Name Download [89]
No File Name Download [93]
No File Name Download [93]
No File Name Download [90]
Battery/Receiver Install. Download [2110]
No File Name Download [3340]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires