Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Basher BSR 1/8 Scale 4WD Rally Car (Ready-To-Run)

Generating Links

Basher BSR 1/8 Scale 4WD Rally Car (Ready-To-Run)

Prix:

Now save économisez 0,00 € 0,00 €

306,22 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9424000001
Livraison gratuite? Cliquez ici pour apprendre plus!

Neuf à partir de Basher, le prêt-à exécuter BSR 1/8 Scale Rally voiture!
Construit sur une plate-forme de poussette robuste avec des améliorations à supporter les rigueurs de la ET conduite hors route, le BSR Rally est une bête d'un véhicule!

Le BSR Rally 1/8 Scale voiture de rallye dispose d' un système d'alimentation sans balai capable 4 cellules monstre et met toute cette puissance à travers une transmission tout d'entraînement 4RM en acier. Avec de grands chocs en alliage d'alésage et de composants lourds, cette voiture peut lancer hors presque rien et juste continuer à goin '. Le châssis dispose de tout le même réglage que vous attendez d'un véhicule de course complet, y compris le carrossage, pincement, et la position de choc de sorte que vous pouvez régler votre BSR Rally pour chaque état de surface.

L'attention portée aux détails sur cette voiture est extraordinaire. Les ingénieurs et les concepteurs à Basher ont subi un vaste processus de test et de développement pour assurer pas de raccourcis ont été prises. Équipe Basher comprend l'importance de service après-vente et d'offrir une gamme complète de pièces de rechange pour votre combat voiture balafré avec une gamme impressionnante de pièces hop-up pour mettre à niveau votre tour.

Caractéristiques:
• Propulsé par deux piles 7.4V 2S Lipoly
• 4 roues motrices à l'avant / diff en acier arrière.
• Toe réglable, Camber et la position de choc
• DMACK Pré-collé Sur route Rallye Pneus
• Châssis en aluminium de 3mm
• Moteur 2100KV brushless puissant avec un support 120A ESC stable.
• tige de cravate et d'un lien de carrossage sont faites par l'acier, augmenter la fiabilité.
• 17mm Aluminium Big Bore Shock

Spécifications:
Largeur: 305mm
Hauteur: 200mm
Longueur: 530mm
Empattement: 327mm
Garde au sol: 17mm
Moteur: 2100KV, 40mm Brushless
ESC: 120A imperméable à l' eau
Servo: Eau de vitesse en métal résistant
Entraînement: arbre d' entraînement complet 4WD temps
Compartiment de la batterie: 137mm x 47mm (7.4V Lipoly Hardcase Batterie)

Obligatoire:
2 x 30C 2S 7.4V 5000mAh Hardcase LiPoly Batteries
4 piles AAA (pour l'émetteur)

  • Basher BSR 1/8 Scale 4WD Rally Car
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 25, 2016

best car ever very powerful and very fast.

Drago | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 21, 2016

A great RTR, very durable and on sale for 180€ offers tremendous value! OK so this a TeamC GR8E rebrand, 1:8 GTE RTR car with short 330m chassis, so all TeamC GT8 parts are a direct fit. Quality for a RTR is great, a lot of (durable) plastic and in stock form I would only change the remote (only OK for kids) and put a fan on the motor.

You can also go full out like I did and use the car for 1:8 GT racing. In that case you will have to change the complete electronics (for more powerful 4S or 6S system), get a real 1:8 GT body (HK offered Blitz 1:8 GT is one of the best) and change the outdrives (BZ-888 hardened ones a direct replacement and very cheap) since I managed to wear the stock ones on 6S in just 100 laps (or 1h of track time).

w.ritchie24@gmai | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 22, 2016

Awesome car, heaps of grunt. I have absolutely trashed this car and it handles everything you throw at it. Nothing broken yet, surprisingly, just had the usual loose screw and nut. Make sure you lock tight everything.

Malcolm | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 28, 2015

Great car. Recommended. This car is super-fast and very realistic. Wish I could get more parts for it though. As with all cars check for loose nuts and bolts before using. Using 2 5800 lipo hard case packs and get around 25mins

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 11, 2015

Cheaper to buy well satisfied.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 03, 2015

IMPRESIONANTE, abres la caja y dices guauuuu, que pasada de coche, con retorvisores, limpiaparabrisas, esoectacular

Antoine | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 02, 2015

Very good little car, I received mine today and, for the negative side : - the body isn't perfect, for sure, and I'll need to reinforce it soon because I don't feel it lasting very long,
- the transmitter is awful and there is a delay between it and the reactions of the car
- there isn't any wrenches/tools included in the package...
For the positive side : - It's a very good looking car, massive and very realistic
- it's a 1/8th buggy underneath, so it feels very durable, the parts are not small
- it's pure fun to drive, and with little experience (i've got a rustler vxl), you can drift it as K.Block does, with the power ! Very entertaining.
- it's very powerful, there's not plenty of full speed but a lot of torque : exactly what a rallye car has to be !

Peter | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 01, 2015

I got this one on sale with free shipping.
Body-shell needed some trimming around the wheel arches with some minor tidying up in a few other areas. Some of the ball linked suspension and steering joints have excessive play in them. I added 1.5 mm thick rubber, glued to the front of the battery boxes to get clearance between battery and motor pinion. Batteries used are Turnigy 6000 mAh 2S2P 7.4V 25C Hard-case Packs. They fit well & go well. The car is supplied with a 'Y' lead that suits the battery leads as supplied. TX is very compact and functional For the money this is a hoot to drive and it goes like a cut cat. Hopefully it lasts!!

Abo Soud | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 29, 2015

I ordered this for a friend and was interesting to look inside the box. the finishing is good enough for the price and it look awesome. will report back if performance wasn't as good after he use it.

Michaela | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 09, 2015

Der BSR 1:8 Rally bekommt von mir 98 von 100 Punkten!
Top Produkt, Top Qualitt, und geht Hammermig!!
Einziger Manko, smtliche Wurm-Madenschrauben gehren noch vor der ersten Probe Fahrt mit einem Schraubenkleber gesichert.
Aber dieses Problem haben smtliche anderen Hersteller auch!
Fazit: Einfach nur Top!

  1. 1
  2. 2
  3. 3
Fichiers clients
No File Name Download [2123]
No File Name Download [1921]
concept car hobbytech Download [2123]
manual Download [4565]
ESC manual Download [42]
Manual Download [4565]
manual Download [4565]
manual Download [4565]
manual Download [4565]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires