S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

BMS-2514 Coreless numérique en alliage de vitesse Servo - 33,2 kg / 0.13s / 7.4V (High Voltage)

BMS-2514 Coreless numérique en alliage de vitesse Servo - 33,2 kg / 0.13s / 7...

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
160 g
SKU:
BMS-2514

Combinez

et économisez plus
acc
Description
du

Le BMS-2514 est une haute tension (7.4V) Coreless Servo numérique avec engrenages en titane et un cas de dissipateur de chaleur Alu. Le BMS-2514 comprend un robuste palonnier ensemble.

Spécification:
Poids: 69 grammes
Dimensions: 40,5 x 20 x 39 mm
Couple @ 6V: 27,1 kg / cm
Couple @ 7.4V: 33,2 kg / cm
Vitesse @ 6V: 0.16sec / 60 deg sans charge
Vitesse @ 7.4V: 0.13sec / 60 deg sans charge

Caractéristiques:
Alu Case dissipateur de chaleur
Titanium engrenage
Coreless Motor
digital Servo
Double roulement à billes
connecteur de type JR
Compatible avec 2s Lipoly (7.4v), 6 cellules Nimh & 2 A123 de cellules (6.6V).

Le Le BMS-2514 est servo haute performance fabriqué à Taïwan et recommandé pour toutes les applications.

Product
Specifications

Informations supplémentaires

  • Référence:
    BMS-2514
  • Brand:
    Non communiqué
  • Poids (g)
    160.00
  • Longueur
    66.00
  • Largeur:
    11.00
  • Taille:
    33.00
  • Vitesse ( Sec / 60deg )
    0.13
  • Couple ( kg ) ( min . 0,01 kg )
    33.20
  • Unit Weight (g):
    71
  • A (mm):
    43.00
  • B ( mm )
    40.00
  • C ( mm )
    38.00
  • D (mm):
    20.00
  • E ( mm ):
    54.00
  • F ( mm)
    28.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Its no titanim gear . Power gear broke - It is aluminim or other soft material. I crash 2,2m model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This servo are dead after 6 onths on my little axial scx10.

Pinion hs...not good quality like savor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
.

.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
servo de muy buenas cualidades , se puede conectar a 7,4 v , espero que me cumpla con lo descrito en las especificaciones

montado en mi Gmade R1
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ok guys I ordered over 8 pcs of these servos for testing purposes and to install in my planes. All 8 were tested under extreme pull stress starting from 12kg/cm to 19.5kg/cm at 7.4V. The servos easily reach 16.4kg/cm without any problems. The issues begin after 20kg/cm, some of the servos began to buzz and not operate properly. They vibrated and did not move smoothly.



I tested electronics and all was well-made. The gears are good and smooth. Overall, the quality of these servos are okay for those who only need 18kg/cm performance, not more.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very fast and powerful. Accurate, a bit more noise than my hitecs. But great quality at a better price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
awesome servo, very strong, I replaced a hitec 7950 with this its a hair weaker, i'd compare it to a hitec 7955, so far i'm very happy. it is power hungry, I had a HK3a UBEC and it would overdraw it and the RX would lose bind, I have that BEC with a reciever capacitor and it works fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's a very strong and accurate servo.

I've installed it in my traxxas 1/10 summit instead of 2 pre-installed traxxas 2075 servos.

I'm very happy with this servo!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.