New Items Actus Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

BMS-621MG High Speed ​​Servo (Metal Gear) 6,4 kg / .13sec / 47g

BMS-621MG High Speed ​​Servo (Metal Gear) 6,4 kg / .13sec / 47g

Discontinued Product

Please continue searching for a similar product.
SKU:
BMS-621MG
WANT FREE SHIPPING? Click here to find out more!
BMS-621MG High Speed ​​Servo (Metal Gear) 6,4 kg / .13sec / 47g
Le servo est livré avec un ensemble d'accessoires de servo et est fait avec un lourd cas devoir d'asservissement, le servo est conçu pour R / C applications automobiles de haute performance. Double roulement à billes de caoutchouc souple imperméable à l' eau, sinon la spline ourput est de même avec Futaba 25 dent.

Ce servo est livré avec JR / Hitec S Connecteur également connu comme un «connecteur universel». Même pensé que ce servo est livré avec JR / Hitec S Connecteurs, ce servo est compatible électriquement avec les récepteurs Futaba.

Engrenage 1. Métal
2. Engin de courbe avec lisse.
3. Double M9.6 roulement
à billes (si-huile)
4. 3 pôles fort couple du moteur avec
un signal faible incidence et le succès obtenir la certification CE.
5. Caoutchouc cas approprié pour imperméable
à l' eau
6. Même avec Futaba 25 dent spline
7. Valise rigide servo


Poids:
47 grammes / 1,66 oz
Dimensions: 40,5 x 20 x 38,5 mm / 1,60 x 0,78 x 1,54 pouces
Couple à 4.8V: 6,4 kg-cm 89 oz-in
Couple à 6.0V: 7,2 kg-cm, 109 oz-in
Vitesse A 4.8V: 0,13 s / 60 ° sans charge
Vitesse A 6.0V: 0.10 sec / 60 ° sans charge

  • UGS BMS-621MG
  • Brand Bluebird
  • Poids 79.0000
  • Longueur 140.00
  • Packaging Width 30.00
  • la taille 100.00
  • Couple ( kg ) ( min . 0,01 kg ) 7.20
  • Vitesse ( Sec / 60deg ) 0.10
  • A (mm) 42.00
  • B ( mm ) 41.00
  • C ( mm ) 37.92
  • D (mm) 20.00
  • E ( mm ) 54.00
  • F ( mm) 27.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have installed this servo in my 2,6m 3d model as a gas sevro. After 20min of good work on the ground (while I was trimming a model) IT BURND!!! well, good that happend not in the air , not recommended

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have installed this servo in my 2,6m 3d model as a gas sevro. After 20min of good work on the ground (while I was trimming a model) IT BURND!!! well, good that happend not in the air , not recommended

I've been using these for years in my yachts for rudder control and had only one fail.
I sail in salt water and have had boats flooded, but I pack top gearbox with thick lanolin grease, add 'O' ring onto shaft, coat with liquid electrical tape (rubber compound) and they are bullet-proof. I use them in all my yachts. Great power, good centreing, tough and low power consumption.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've been using these for years in my yachts for rudder control and had only one fail.
I sail in salt water and have had boats flooded, but I pack top gearbox with thick lanolin grease, add 'O' ring onto shaft, coat with liquid electrical tape (rubber compound) and they are bullet-proof. I use them in all my yachts. Great power, good centreing, tough and low power consumption.

Bought 5 for a seagull models mxs-r, all 5 initially looked very good, however, last night the throttle servo melted down, literally, lots of smoke and melted plastic. Fortunately the airframe was on the bench and not in the air. I have read other reports of BB servos melting down, I'll be pulling the rest and bench testing them for an extended period of time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 5 for a seagull models mxs-r, all 5 initially looked very good, however, last night the throttle servo melted down, literally, lots of smoke and melted plastic. Fortunately the airframe was on the bench and not in the air. I have read other reports of BB servos melting down, I'll be pulling the rest and bench testing them for an extended period of time.

This bluebird BMS-621MG servo is very nice for the price. Quality seems great and speed/torque are quite good and more than adequate for on-road use like I use it. I can highly recommend this to everone.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This bluebird BMS-621MG servo is very nice for the price. Quality seems great and speed/torque are quite good and more than adequate for on-road use like I use it. I can highly recommend this to everone.

Ive brought 2 of these servos now and they both work perfectly! nice and fast and center every time, im using them on 1/10 drift cars with a 6v bec, i will be using the hi torque version in my scx10 trail truck when it shows up they are the best bang for buck around!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ive brought 2 of these servos now and they both work perfectly! nice and fast and center every time, im using them on 1/10 drift cars with a 6v bec, i will be using the hi torque version in my scx10 trail truck when it shows up they are the best bang for buck around!

it came very well packaged and with all the screws and arms. it gives 6.4Kg @ 4.8V and can withstand 6V. Great for RC car and plane

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

it came very well packaged and with all the screws and arms. it gives 6.4Kg @ 4.8V and can withstand 6V. Great for RC car and plane

For the price this servo has a lot of torque and is very fast. My only complaint is it does not center well. Very good for a basher 2wd off road car steering or off road nitro throttle on a budget.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the price this servo has a lot of torque and is very fast. My only complaint is it does not center well. Very good for a basher 2wd off road car steering or off road nitro throttle on a budget.

I purchased two that run in my 1/8 scale buggy. Good torque, centers great, and noticeable quick speed. I ordered two more to replace my steering servos in my 1/10 scale nitro touring car and 1/10 electric touring car.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased two that run in my 1/8 scale buggy. Good torque, centers great, and noticeable quick speed. I ordered two more to replace my steering servos in my 1/10 scale nitro touring car and 1/10 electric touring car.

That it is what i call a very good servo. it is very fast, Reliable and cheap! I used it in my SC10 truck and now it is my rc drift car =)
I have no problema with this servo. I will buy more....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

That it is what i call a very good servo. it is very fast, Reliable and cheap! I used it in my SC10 truck and now it is my rc drift car =)
I have no problema with this servo. I will buy more....

Purchased 9 of these servos and 3 burned out during installation. I didn't expect to find that 30 percent of these servos were faulty

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased 9 of these servos and 3 burned out during installation. I didn't expect to find that 30 percent of these servos were faulty

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking