Turnigy D2205-2600KV 28g Brushless Motor CCW

• Overall
• Quality
• Value

Cheap but bad quality shaft

Nov 21, 2021

Just flew once and landing from very small height damaged motor shaft. Cannot use it anymore. expected better quality. Waste of money for me. Have to look for another brand for quality.

• Overall
• Quality
• Value

Motor

Oct 23, 2021

Buen motor

• Overall
• Quality
• Value

LOOKS GOOD HAVEN'T FLOWN IT YET

Feb 06, 2021

LOOKS LINE A GOOD PRODUCT FOR USE ON MY SMALLER MODELS. I WAS REALLY LOOKING FOR D2628/10 MOTORS BUT SEEMS AS IF THEY HAVE BEEN DISCONTINUED WHICH I THINK IS A BIG MISTAKE.

• Overall
• Quality
• Value

Good

Nov 20, 2020

Good motor, runs smooth

• Overall
• Quality
• Value

Amazing

Nov 13, 2019

This motor was pretty good and was very easy to setup. It has power and works well with my RC setup. However, I think that the specifications are incorrect. I would not recommend using a 30amp ESC because it WILL CATCH ON FIRE if you run it at full power. So just get a 20 amp ESC and stop the issue before it becomes one.

• Overall
• Quality
• Value

buena

Jul 16, 2019

buena

• Overall
• Quality
• Value

Great little motors

Jul 02, 2018

simple and cheap, just how i like it

• Overall
• Quality
• Value

This little guy has power!

Jun 27, 2018

Wow, I like it a lot! Even on a 2 cell it has quite the pull... Using it on a Flite test mini, with a 6x4 prop, and works great. On a 4 cell I would imagine it could go pretty ballistic, but there is no need for that at least for me. Perhaps for a rocket XD

• Overall
• Quality
• Value

A good parkjet mk2 replacement motor, with option for 4s.

May 09, 2017

I only tried this motor on a 3s setup because that's what I intend to use it for my parkjet mk2. With a Bullnose 4.0x4.5x3 blade, amp draw is around 16 at full throttle. Should give about 450g of thrust. With a 4.0x4.5 bullnose 2 blade, it's around 13 amps draw at full throttle. With a regular 4.0x4.5 non-bullnose 2 blade, only draws 7 amps at full throttle. This looks like a racerstar motor but it's not the same performance, if you believe the racerstar chart. The performance chart you get from racerstar and the uploaded file here cannot be used to determine the motor's performance. The uploaded chart on 3s performance on a 4045 is not correct unless it's a bullnose 3 blade. It should be a good parkjet replacement motor provided you run it on 3s and bullnose 4045 x 3 blade. Should not draw over 16 amps so a 20amp esc on 3s is all that you need for that kind of setup. Does get hot but not to the point of untouchable with a 3s lipo and 4045x3 bullnose prop at full throttle.

• Overall
• Quality
• Value

Review

Jan 04, 2017

English:
I hat this motor's on a ARC 200 and use ZTW 18A ESC. As battery i use Multistar 1.4A 3s 65c. And all together work Fine. Nice Black finish and enough screw's shiped with.

Deutsch:
Nutze diese Motoren am ARC 200 und ZTW 18A ESC. Als Batterie nehme ich Multistar 1.4 3s 65c. Alles funktioniert einbahnfrei. Nette schwarze Aufmachung und es werden genug Schrauben mit geliefert