S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Kit d'hélicoptères ACHETER HK-450 CCPM 3D électrique VRAC (6pc)

Kit d'hélicoptères ACHETER HK-450 CCPM 3D électrique VRAC (6pc)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
5499 g
SKU:
BULK2
Description
du
ACHETER VRAC: Économisez gros sur l'expédition, avec un carton de 6pc.
Kit d'hélicoptères HK-450 CCPM 3D
Modelé sur la célèbre et éprouvée T-Rex 450.

Spec.
Longueur: 660mm
Hauteur: 230mm
Lame principale Longueur: 325mm
Rotor principal Diamètre: 700mm
Queue Diamètre du rotor: 150mm
Moteur Pignon: 12T / 13T (non inclus)
Entraînement principal de vitesse: 150T
Autorotation queue d'entraînement de vitesse: 106T
Queue d'entraînement de vitesse: 25T
Poids (w / o lame): 450g
Voler Poids: 730 ~ 760g
Articles requis.
Brushless Outrunner Motor & Pignon
Servos
Gyro
Récepteur
ESC
Lipoly batterie (2200mAh 3S)
Nous avons beaucoup de pièces de rechange en stock pour cette machine;
NOTE: Aucune garantie donnée ou implicite sur les pales d'hélicoptère. Les HK-450 lames sont vendus tels quels et ne sont pas soumis au remplacement ou à la qualité des différends. Y compris mais sans s'y limiter à des imperfections cosmétiques ou de fabrication.
Product
Specifications

Informations supplémentaires

  • Référence:
    BULK2
  • Brand:
    Non communiqué
  • Capacité ( mAh )
    Non
  • Poids (g)
    5499.00
  • Longueur:
    0.00
  • Largeur:
    0.00
  • Taille
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
ueber den HK450 wurde ja schon viel und ausgiebig geschrieben. Anzumerken ist aber noch, dass mein 6er Bulk - geliefert im Oktober 09 - noch das alte Modell vom 450er beinhaltete. Das zuvor bestellte Einzelstck hat ein einteiliges Fahrwerk und andere Rotorbltter.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent petit appareil. Quelques corrections apporter mais un bon comportement. rserver aux pilotes expriments et bricoleurs. 6 pices pour voler en escadrilles, rien dire, a a de la gueule. La dco est discretion. L, c'est le cot artiste qui se rvellera. Certain ont d'autres talents. Il ressemble beaucoup au trs lgendaire trex 450 un prix plus abordable et une qualit plutt proche du TREX. Affaire saisir de toute urgence.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great heli for th price! just amazing! flying allmost better than my trex 450! stock blades is just inderucktible
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Verr<y nice helicopter, looks like a lot of other helicopter. Verry nice in flight. Super hobby city setup. Hobbycity setup is goooood for this helicopter. Verry nice. Nice regardsd J
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Heli's look assembled more accurate then single sent unit.

I bought this package to have spareparts for two of my friends' HK-450 and mine..

Real package weights 4,7 kg, but not 5,5kg as it written here.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
muy buena calidad de kits, solo que han variado algunos componentes en distintas entregas, como ser las palas (fibra y plastico) y el tren de aterrizaje, que no es el que se ve en la foto en alguno de los kits
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Continuing from my earlier truncated review...



A pair of the new moulded plastic blades weight in at 71 grammes, compared to 57 grammes for a pair of the glassfibre blades.



If you look carefully at the pictures of the heli on this site (both the single and six-pack pages) you will see the good old blades and U/C in some shots, but the new items in others.



Sadly, my love affair with the HK450 is waning.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Up until now I have been a big fan of the HK450 helicopter and I have recommended it to all of my fellow flyers. I have been prepared to live with the major fault of the tail drive unit (part #F016), which I modify by drilling a 1.3mm hole through the gear hub and epoxy a small piano wire pin. Oh yes, and the consistently off-centre plastic main rotor hub (part #F001) - If you only upgrade one part then get the aluminium head block!



But I am even more disappointed with what Hobby King have done with the HK450 recently. I recieved a box of six, having previously acquired two individual HK450s a few months ago. However, my six helis are not what I was expecting. In a quest to cut the price from around $35 to $30 per unit they have, in my opinion, gone too far down the cheap and cheerful route.



Gone are the U/C struts and aluminium skids and in comes an awful one-piece moulded black plastic abomination which, might be practical (I haven't tried it yet), but looks crap.



HK have also done away with the perfectly good black/yellow fibreglass blades in favour of one-piece moulded plastic units which require silver foil stickers to be placed on the upper and lower surfaces. The foil sticker carry red printed stripes and text which start flaking off straight away making the heli look like it has been through a hedge before even taking to the air. The lower blade surface has an open ribbed structure with lightening holes so care is required when applying the foil stickers. The
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ojo!!!! le bajaron la calidad a los helis ya compre varios de estos helis y ahora le bajaron la calidad vienen con palas de plastico y el tren de aterrisaje es una solo pieza de plastico es algo para tener en cuenta

Despues como siempre el envio todo en orden y no falto nada lastima lo que estan haciendo le bajaron el precio junto con la calidad!!!!!

Estaban mucho mejor antes que ahora!!!

LA FOTO NO CORRESPONDE AL HELI
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Kits, seem to be a 100% Copy of the TRex, all parts fit perfectly. No manual sent with it, but the T-Rex manual does the job as well. You need to bay 2 stk M3x6mm screws to innstal the motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.