S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

C05XL Micro Brushless outrunner 10800kv

C05XL Micro Brushless outrunner 10800kv

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
23 g
SKU:
C05XL-10800
Description
du
C05XL Micro Brushless outrunner 10800kv

Spécification:
Poids: 6.8g
Kv: 10800rpm / v
Taille: 24 x 13.9mm
Courant max: 4A / 40W
Courant: 4.2V / 0.82A (sans charge)
Shaft: 1.5mm
Longueur de l'arbre: 7mm
Product
Specifications

Informations supplémentaires

  • Référence:
    C05XL-10800
  • Brand:
    Non
  • Poids (g)
    23.00
  • Longueur
    70.00
  • Largeur:
    14.00
  • Taille:
    50.00
  • Kv ( rpm / v)
    10800.00
  • Max Currents (A)
    4.00
  • (W ):
    40.00
  • Longueur B ( mm ):
    15.00
  • Longueur Can D ( mm )
    9.00
  • Max Tension (V)
    4.00
  • Arbre A ( mm ):
    2.00
  • Unit Weight (g):
    6.8
  • Diamètre C ( mm )
    14.00
  • Longueur totale E ( mm )
    22.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor I use it on my walkera 4#6S , replaced the old inrunner motor.Now I could see the flight difference ,longer flight time and good headspeed match it with 15 or 16 pinion.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good head speed with a 9 tooth but not much power. I would start with 8 tooth. Not sure if its the motor or the speedo but have to hand start this with hk 7a speedo w/convertor. Runs well once started.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice little critter. HK got the specs WRONG, the shaft diameter is 1,5mm, not 2mm!! Runs well on my v120d02 as a drop-in replacement with a 15T Pinion. Make sure that you use 1mm spacers when using the original motor screws, otherwise they will block. Has even a little more grip with 17T Pinion but then you get over one minute less flight time than with 15T.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
its been getting a lot of reviews so i order 1 , ill follow up on the result once i get it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
You gotta have this one for your 4G3, 4G6 or V120xxx! Use mine with a 18 teeth pinion on 600mAh15C lipo's on a 4G3. Better than HP06, makes it feel powerful. About 6-7 minutes of fast flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little motor. I use it in a Walkera V120D01 with the stock ESC and it makes the heli so much more alive.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Best for walkera 4g6 and 4#6. Pending to mount on CB100. You need to buy a 16T or 15T pinion with 1.5mm hole. You can't find in HK but there are other places. With this you can fly more time with more power.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Best for walkera 4g6 and 4#6. Pending to mount on CB100.
You need to buy a 16T or 15T pinion with 1.5mm hole. You can't find in HK but there are other places. With this you can fly more time with more power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Once installed on the 4 # 6S with 20T pinion it into a beast ..... When you first start ended on the ceiling, with broken rotor. :-(... Engine seems fine, does not heat as the original. Time will tell how durable it is.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i just got one on the last day. It 's aweesome motor when I put it on wk HM 4#6 with 16 T pinion and stick ESC. I like it.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.