New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

C1822 Micro brushless Outrunner 2100kv (14g)

C1822 Micro brushless Outrunner 2100kv (14g)

Shipped From:
  • USA
  • Global

Now save enregistrer 0,00 € 0,00 €

9,67 €
Alert me
Statut:
Epuisé!
SKU:
C1822/20
ETA:
No ETA At This Time [ ? ]
WANT FREE SHIPPING? Click here to find out more!

Caractéristiques.
Diamètre: 18mm
Longueur: 23mm
Arbre: 4 mm
Poids: 14g (avec 10cm
de fil)
Puissance: 50W
Active: 20
Kv: 2100rpm / v
Résistance: 453
Idle actuel: .2A
Max amp: 10A (15sec burst)
Tension: 2-4cell Lipoly


Nous ne disposons pas
d' une taille prop suggérée pour ce petit moteur encore.
Une fois
que nous avons les données, nous allons l' inclure dans ce listing.

  • UGS C1822/20
  • Brand Other
  • Poids 48.0000
  • Longueur 65.00
  • Packaging Width 40.00
  • la taille 40.00
  • Kv ( rpm / v) 2100.00
  • Max Current (A) 10.00
  • Résistance ( mh ) 453.00
  • Max Tension (V) 15.00
  • (W ) 50.00
  • Arbre A ( mm ) 2.00
  • Longueur B ( mm ) 18.00
  • Diamètre C ( mm ) 18.00
  • Longueur Can D ( mm ) 9.00
  • Longueur totale E ( mm ) 26.00
  • Scratch foamy
  • 1822-2100
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great little motor, love the power and reliability I will buy more of these for sure

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little motor, love the power and reliability I will buy more of these for sure

I don't think you could find a worse design for a RC motor. You can not attach a propeller any way to it. You have to use the "integrated" prop saver design. Integrated and unremovable. I installed the propeller with the provided O rings, and they just came off at half throttle, or the ring snapped. No matter what you do, they are not good. You don't have to trust me, spend your money on these motors, and convince yourself.
Now i have four motors to use for.....uh....uh.....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I don't think you could find a worse design for a RC motor. You can not attach a propeller any way to it. You have to use the "integrated" prop saver design. Integrated and unremovable. I installed the propeller with the provided O rings, and they just came off at half throttle, or the ring snapped. No matter what you do, they are not good. You don't have to trust me, spend your money on these motors, and convince yourself.
Now i have four motors to use for.....uh....uh.....

Perfect fit for Mini Swift. Flies on both 2S and 3S using a 5043 prop. On 2S, it flies like stock. On 3S, it does great power verticals and out-of-control prop rolls. This should be the stock setup for that plane. It can probably handle other prop combinations too.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect fit for Mini Swift. Flies on both 2S and 3S using a 5043 prop. On 2S, it flies like stock. On 3S, it does great power verticals and out-of-control prop rolls. This should be the stock setup for that plane. It can probably handle other prop combinations too.

This is a fantastic little motor! I purchased it to use on my Mini Skywalker, and when used with a 3S and 5x3 prop that plane is a rocket! I'm not using it for FPV flight so mine is lighter than normal, but since this motor is rated to 4S it's likely to just rip the wings off that plane if (when?) I try it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a fantastic little motor! I purchased it to use on my Mini Skywalker, and when used with a 3S and 5x3 prop that plane is a rocket! I'm not using it for FPV flight so mine is lighter than normal, but since this motor is rated to 4S it's likely to just rip the wings off that plane if (when?) I try it.

Ser que presta?? espero que sim!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ser que presta?? espero que sim!

I don't think you would want to run one of these motors to 10 amps. Mine cuts out before reaching 3 amps with a 6x5 prop and even then it is getting warm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I don't think you would want to run one of these motors to 10 amps. Mine cuts out before reaching 3 amps with a 6x5 prop and even then it is getting warm.

fragilit des fils, a coller avnt toute manipulation

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

fragilit des fils, a coller avnt toute manipulation

Parfait pour quiper une mini swift

avec controleur Turnigy 6A un hlice 5x3 et accus 2S 500mAh

poids en ordre de vol 108 g. vol lent en indoor et se dfend en extrieur mme avec un vent moyen

seuls les lastics sont difficiles trouver

excellent petit moteur

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Parfait pour quiper une mini swift

avec controleur Turnigy 6A un hlice 5x3 et accus 2S 500mAh

poids en ordre de vol 108 g. vol lent en indoor et se dfend en extrieur mme avec un vent moyen

seuls les lastics sont difficiles trouver

excellent petit moteur

50/50 chance of working. Prop saver idea works well on this size motor although have concerns about availability of replacement rubber rings over the life of the motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

50/50 chance of working. Prop saver idea works well on this size motor although have concerns about availability of replacement rubber rings over the life of the motor.

Little motor but gives very nice perfomance, I used in my foamy which weights 150 grams with GWS 5030, Rhino 360, ESC 6A Turnigy plush...

It can also do loop so VERY HAPPY WITH THIS MOTOR...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Little motor but gives very nice perfomance, I used in my foamy which weights 150 grams with GWS 5030, Rhino 360, ESC 6A Turnigy plush...

It can also do loop so VERY HAPPY WITH THIS MOTOR...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags