S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

C2404 Brushless Outrunner 1900kv

C2404 Brushless Outrunner 1900kv

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
48 g
SKU:
C2404-1900
Description
du

C2404 Brushless Outrunner 1900kv

Spec.
Batterie: 2S /7.4V
RPM: 1900kv
Max Power: 120w
Aucun courant de charge: 1,5A @ 7.4v
Dimensions: 10 x 30mm
Poids: 20,9 g (y compris les connecteurs)
Diamètre de l' arbre: 3mm

Données de performance:
Thrust: 360g
Prop: 9050
Max actuel: 9.4A
Type de batterie: 2S 7.4V

Product
Specifications

Informations supplémentaires

  • Référence:
    C2404-1900
  • Brand:
    Non communiqué
  • Poids (g)
    48.00
  • Longueur
    105.00
  • Largeur:
    45.00
  • Taille:
    45.00
  • Kv ( rpm / v)
    1900.00
  • Unit Weight (g)
    20.9
  • Max Currents (A):
    9.40
  • Résistance ( mh ):
    0.00
  • Max Tension (V)
    7.00
  • (W )
    120.00
  • Arbre A ( mm ):
    3.00
  • Longueur B ( mm ):
    10.00
  • Diamètre C ( mm )
    30.00
  • Longueur Can D ( mm )
    4.00
  • Longueur totale E ( mm ):
    19.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Verry powerfull motor value for money
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Should have started using more prop saver motors long ago. They really do work and will save you many a bent shaft/broken props buckled motors from the numerous nose dived landings your test flights will incur.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have one running now since approx. 50 flights on a crack-yak with 2s 450mAh and 9x5 prop.
There is only one thing I want to mention negatively: sometimes on startup from zero the motor makes some strange noise like "zzzz" and does not really respond to throttle properly (but prop is turning, little jittering) for 1 or 2 seconds - afterwards no problem.

Despite of this, I never had any trouble in flight - thrust is great and way enough for this 200g 3d-foamie.
Throttle response is awesome (except the above mentioned), never had a motor like that!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent little outrunner. It performances just as great as it looks. I use it with an 8x4 gws DD prop, 350-550mah 2S lipo batteries and an HK 12amp esc. Very quiet motor. It does however generate a lot of heat with any prop bigger than 8x4 on 2s. So I only recommend the 8x4. It requires a little over half throttle to hover on a fully charged 500mah 2s lipo, but enough for 3D.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi, I would have liked to say that these little motors are the best thing out but ... I purchased these for an octocopter (8 rotor heli). Running them on 3 cell 3300mAh battery, 5x3 3-blade propeller, and 10A turnigy plush esc's. Performance is good and they generate very little heat on this setup. Unfortunately one after the other they have failed (stopped working). Of the original 12 I bought (a couple of spares), I now have 7 that work. Do I buy more, or cut my losses and try something else, is the question I am faced with. As an aside, I found the shafts impossible to remove. I planned to replace the shafts with longer ones so I could use collet prop drivers, but destroyed one motor trying. Using the standard prop saver, the flat that the propeller seats onto is very narrow and it is difficult to get the propeller seated and running true. Overall not super excited
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Preliminary tests show

affordable quality and performance
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Small motor for 200 grams foamies and it consume less power since the battery use is around 500-600mah
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Today I got a motor. High-quality done, without backlashs. Works very quietly. My motors weights 19,8gr. without 2mm connectors. Suitable props only GWS DD series.Tested motor with a prop GWS 8x4DD, Turnigy Nano-tech 2S 460mAh 25C and 12A BlueSeries ESC. And I got the following results: Uo=8,4V. Umin.=7,61V. Imax. = 9,34A. Pmax.=71,4W. 330gr. of thrust. Very pleased with this motor. Thrust is more than enough for 170gr. model. Will order 2 more pieces.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Best looking motors I have ever own. 9x5" prop fits directly on it, only problem is with GWS props, since hole is little smaller on props. It runs without problems on 3S lipo with 7x3,5" CW and CCW props for multicopters. I had them on my first quadcopter. For using on multicopters I advice you to change motors shafts for longer ones, so you can use prop adapters. My motors weights between 19,4 and 19,7g without 2mm connectors. Motors came only with male connectors, so yu have to buy 2mm female connectors for ESC-s
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.