New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Canary SQ en fibre de verre et de balsa / Ply Planeur KIT

Canary SQ en fibre de verre et de balsa / Ply Planeur KIT

Discontinued Product

Please continue searching for a similar product.
SKU:
CANARYSQSKIT
WANT FREE SHIPPING? Click here to find out more!

Le Canary SQ est un fantastique poids léger Pod et Boom planeur avec une nacelle en fibre de verre, boom de fibre de carbone et construit nappe et la construction de l'aile de balsa. Le Canary SQ nécessite 2 servos x 9g pour la gouverne de direction et d'un ascenseur, votre propre émetteur et le récepteur (Tx / Rx) et une batterie de récepteur. Tout le matériel général (tiges poussoirs, vis, train d'atterrissage, etc.) sont inclus pour obtenir ce kit en cours.

Spécifications:

Envergure: 1210mm
Longueur: 828mm
Poids: 230g (sans électronique)

Obligatoire:
2 x servos 9g
Votre propre Tx / Rx
Batterie Rx

  • UGS CANARYSQSKIT
  • Brand -
  • Capacité ( mAh ) -
  • Poids 862.0000
  • Longueur 655.00
  • Packaging Width 65.00
  • la taille 240.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I weighed the individual parts before starting the assembly process.

83 g Left wing
69 g Right wring (NOTE THE EXTRA 14 grams on the left wing)
2.8g Wing Joiner (big)
0.4g Wing Joiner (small)
33.1g Pod
11.6g Boom (replaced with aluminum tube 7.8g)
5.4g Vertical stab & rudder
11.4g Horizontal stab
0.2g Plywood boom hold/rear bulkhead
3.6g "push rod" wire (replaced with fishing line pull/pull/rubber band system)
4.0g Canopy (before trimming)

Note the 14g difference between the left and right wing. After joining the wings, the balance point is 15mm left of center, added 8 grams on the right wing 330mm from center to balance.

1st flight today, 290g flight weight (no engine/prop, just a glider).

CG at 65mm, need to add 13g in front to get this CG.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I weighed the individual parts before starting the assembly process.

83 g Left wing
69 g Right wring (NOTE THE EXTRA 14 grams on the left wing)
2.8g Wing Joiner (big)
0.4g Wing Joiner (small)
33.1g Pod
11.6g Boom (replaced with aluminum tube 7.8g)
5.4g Vertical stab & rudder
11.4g Horizontal stab
0.2g Plywood boom hold/rear bulkhead
3.6g "push rod" wire (replaced with fishing line pull/pull/rubber band system)
4.0g Canopy (before trimming)

Note the 14g difference between the left and right wing. After joining the wings, the balance point is 15mm left of center, added 8 grams on the right wing 330mm from center to balance.

1st flight today, 290g flight weight (no engine/prop, just a glider).

CG at 65mm, need to add 13g in front to get this CG.

Deze Kanarie op woensdag besteld en vrijdag al in huis, het produkt word "double boxed" verzonden. Helaas zoals in de review op de HK site al stond onbreekt de servotray en de hoogstarthaak met toebehoren. De geleverde staartboom is vrij zwaar en grof uitgezaagd, deze ga ik vervangen. Pushrods zijn van ijzerdraad en zitten opgevouwen in de doos en zijn vrij nutteloos, hier kan je zelf iets beters voor verzinne zoals pull-pull. Afgezien van bovenstaande problemen is de kwaliteit van dit product in orde. De bespanning van de vleugels is erg netjes afgewerkt. Voor het geld kan je dit zelf nooit maken, ook al moet er nog wel het e.e.a. aan de kwaliteit gebeuren.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Deze Kanarie op woensdag besteld en vrijdag al in huis, het produkt word "double boxed" verzonden. Helaas zoals in de review op de HK site al stond onbreekt de servotray en de hoogstarthaak met toebehoren. De geleverde staartboom is vrij zwaar en grof uitgezaagd, deze ga ik vervangen. Pushrods zijn van ijzerdraad en zitten opgevouwen in de doos en zijn vrij nutteloos, hier kan je zelf iets beters voor verzinne zoals pull-pull. Afgezien van bovenstaande problemen is de kwaliteit van dit product in orde. De bespanning van de vleugels is erg netjes afgewerkt. Voor het geld kan je dit zelf nooit maken, ook al moet er nog wel het e.e.a. aan de kwaliteit gebeuren.

As mentioned before great little glider it arrived fast, in 100pcnt contents condition, but I can not find a pdf of the plans...please can anyone help me, where to find them

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As mentioned before great little glider it arrived fast, in 100pcnt contents condition, but I can not find a pdf of the plans...please can anyone help me, where to find them

the only real benefit of the PDF plans for the Canary would be to fin the recommended CG point , (52-58mm from LE)

I used a cheap wooden kids ruler for the servo tray as it was lighter and strong enough. I also fabricated some control horns from a sheet of strong plastic they I salvage from a kids toy, they are just like the ones on a Fling, as I tossed out the heavy metal pushrods and now use braided fishing line, push/pull setup. SO light!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the only real benefit of the PDF plans for the Canary would be to fin the recommended CG point , (52-58mm from LE)

I used a cheap wooden kids ruler for the servo tray as it was lighter and strong enough. I also fabricated some control horns from a sheet of strong plastic they I salvage from a kids toy, they are just like the ones on a Fling, as I tossed out the heavy metal pushrods and now use braided fishing line, push/pull setup. SO light!

I purchased three of these as gifts for Christmas, all three had the same part missing. Tried to get the part fomr HK and all I got was store credit. This strike two for HK,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased three of these as gifts for Christmas, all three had the same part missing. Tried to get the part fomr HK and all I got was store credit. This strike two for HK,

parfait! parfait!

moteur 16g hextronik

accus 2s 370 mah lipo

variateur 10 amp

helice 8X4.5

cone 20mm axe 2mm

servos htx 500

tres bon planeur pour ce que on lui demande de faire, le planeur du dimanche pour changer!!

montage un laborieux, mais vols nickel et trajectoire nette

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

parfait! parfait!

moteur 16g hextronik

accus 2s 370 mah lipo

variateur 10 amp

helice 8X4.5

cone 20mm axe 2mm

servos htx 500

tres bon planeur pour ce que on lui demande de faire, le planeur du dimanche pour changer!!

montage un laborieux, mais vols nickel et trajectoire nette

very nice lil glider.... fuse a tad narrower than expected.... had to use ultra micro servos for clearance.... had bought 9g digital they do not fit.
the 950ma 2 cell battery and a 10A HK BLESC worked great with a lil eflite 250 2200kv outrunner and a .049 prop for reasonable flight times..... still looking for an acceptable folding prop.

overall good deal.... though was surprised at international shipping cost applied to USA warehouse order with USPS shipping thinking it would be more honest to raise product price and charge actual shipping cost.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very nice lil glider.... fuse a tad narrower than expected.... had to use ultra micro servos for clearance.... had bought 9g digital they do not fit.
the 950ma 2 cell battery and a 10A HK BLESC worked great with a lil eflite 250 2200kv outrunner and a .049 prop for reasonable flight times..... still looking for an acceptable folding prop.

overall good deal.... though was surprised at international shipping cost applied to USA warehouse order with USPS shipping thinking it would be more honest to raise product price and charge actual shipping cost.

wonderfull glider for beginner, indestructible and very stable after a correct calibration, CG for a stable flight are at 70mm and not 52-59mm like writen in the manual. The balsa support for the servo controller are not included i had to build one and fix to the nacelle

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

wonderfull glider for beginner, indestructible and very stable after a correct calibration, CG for a stable flight are at 70mm and not 52-59mm like writen in the manual. The balsa support for the servo controller are not included i had to build one and fix to the nacelle

Mod with a 4000KV 20mm motor flies like a dream

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mod with a 4000KV 20mm motor flies like a dream

I did the maiden today on a light slope. I am overall pleased with the flying caracteristics of the bird, although the CoG in the manual is selected rather progressive. Mine entered balanced flight at approx 63mm from leading edge, which gives very sophisticated control over both axis. Elevator is approx. 1 degree up, which is fine. Changing AOA does not give better results. Tip stall is nice and smooth. You just should not use the rods and horns supplied with the kit. I did a pull-pull configuration on both rudder and elevator, search for 'Fling manual' on the net for instructions. Using a 2s 350mAh LiPO directly connected to a OrangeRX5 and using two simple 9g HK15178 servos, you get a *very* cheap yet full package, which is darn nice flyable in light wind conditions.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I did the maiden today on a light slope. I am overall pleased with the flying caracteristics of the bird, although the CoG in the manual is selected rather progressive. Mine entered balanced flight at approx 63mm from leading edge, which gives very sophisticated control over both axis. Elevator is approx. 1 degree up, which is fine. Changing AOA does not give better results. Tip stall is nice and smooth. You just should not use the rods and horns supplied with the kit. I did a pull-pull configuration on both rudder and elevator, search for 'Fling manual' on the net for instructions. Using a 2s 350mAh LiPO directly connected to a OrangeRX5 and using two simple 9g HK15178 servos, you get a *very* cheap yet full package, which is darn nice flyable in light wind conditions.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
Manual. Download [292]
Canary Manual Download [1407]
Canary Instructions Download [1407]
from the international files page.. Download [1407]
Canary Manual Download [1407]
Canary Instructions Download [1407]
Canary Instructions Download [1407]
MANUAL Download [16]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!