Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

CAP 232 Balsa 922mm pré-intégré Plug & Fly

Generating Links

CAP 232 Balsa 922mm pré-intégré Plug & Fly

Prix:

Now save économisez 0,00 € 0,00 €

98,95 €
Expédié de:
  • USA
  • Global
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
CAP232-PNP
Livraison gratuite? Cliquez ici pour apprendre plus!

Cette fiche brillante et voler PAC est livré avec tous les appareils électroniques pré-installé pour faire une construction incroyablement rapide. Ce modèle superbe capacités acrobatiques plus de compenser ce n'est pas l'apparence d'échelle tout à fait. bouchon de Balsa et la mouche est pas quelque chose que vous voyez souvent et si beaucoup de travail a été fait pour vous que 1-2 heures maximum est tout ce que vous allez avoir besoin d'entrer dans l'air. Le moteur outrunner puissant, ESC et tous les servos sont pré-équipés, vous laissant à coller sur les Tailfeathers et boulonner l'aile.

Nous avons testé et piloté cette PAC un peu et il est étonnamment capable avec une poussée impressionnante du moteur de faible kv et une grande combinaison de prop SF. Les servos sont plus à la hauteur de garder les dimensions impressionnantes surfaces de contrôle pointant dans la bonne direction et le modèle est pratique avec son aile amovible, couvrant bien appliqué, ce qui est bon pour l'orientation et châssis robuste. Si vous en avez marre de la mousse, mais souhaitez une petite-ish, facile à construire et modèle de voltige très capable, cet amusement, CAP 232 pas cher est juste le billet!

Spécifications:
Envergure: 922mm
Longueur: 885mm
Wing Chargement: 32gdm2
Wing Zone: 20.9dm2
Voler Poids: 650g
Servo: 9g x 4
ESC: 30A w / BEC
Moteur: 4006 Brushless Outrunner 900kv
Prop: 11x4.7SF

Comprend:
Autocollants
Instructions

A besoin:
Your Own 4 canaux TX / RX
Batterie 1300mAh ~ 2200mAh 3s Lipoly

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

David | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 19, 2016

Pros:
Ok built. I recommend it being re-enforced with super glue, as it is pooly glued.
The plane flied great.
Motor is good quality

Cons:
-NO SPARE PARTS AVAILABLE
-Besides the Motor, ALL THE INCLUDED electronics are low quality. ESC WILL burn out on you eventually in mid flight. This happened to me and other people. There are videos of it.

If you decide to buy this, I recommend you replace all the electronics besides the motor, reinforce with more glue, and hope to not crash because there are NO parts available for it.

For this, despite the fact that it flies great, I regret buying this plane. The ESC failure set it on fire in mid air and I lost my $150.0...

jason | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 24, 2016

This plane was a nightmare to build, It could not be considered pnp. All the servos were loose as they were screwed into places where screws can not grip. All the servos were glitchy and needed replacing, even the screws holding them were rusty. The prop nuts were also rusty and all the wiring plus the ESC needed replacing. One push rod was also missing. If I didnt have a large amount of spare parts on hand this plane would never have flown.

Mughees | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 04, 2014

It seems missing pushrods in the pckage is a common problem. I had mine delivered last year. Just finally found time to open the box and assemble this baby. All in all the model seems capable enough. The build quality is good. The servos are nameless and look a bit cheap though. The control surfaces look quite big. I wonder if it can do 3d.
Yesterday i did a ground test. The motor ran for 3 minutes on full throttle with 2s 1800mah battery. I will be getting a 3s 2500mah at least for the maiden flight. That happens after two weeks when I am back home from work.

Gel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 27, 2014

Very nice plane, but be careful mine has the right COG without the battery, so if I put the battery in battery case, cog is more than 10 mm forward so very nose heavy. I put the battery under the cockpit for a good COG

Gel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 23, 2014

Very nice plane, but it took 2 week to package before it was shipped...
Was missing a pushing rod in mine too.
My first balsa plane, very happy with it. After been assembled, with a 1500 mAh battery, it was very nose heavy (cog 10 mm forward, 79mm from the edge of the wing instead of 89mm). I broke the battery compartiment to put the battery vertically, and then the cog was right. Go vertical very easyly, and had take some hard landing, but stay strong! Yesterday I broke the landing gear sock, but some epoxy and all is like brand new!
A good plane!

Dyami | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2014

Great overall performance. Great craftsmanship!
Flys amazing regardless of finding the right cg.
Hovers well with a little extra weight on the tail. Remove the tail wight and you have an incredible sport flyer.
Thanks hobby king! A

twoblews | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 30, 2014

Bought this plane when on special late last year. Unfortunately it arrived in New Zealand damaged, took photos, scanned HK paperwork and followed HK compalint proceedure, They got matter all sorted form me quickly and very much in my favour. Full marks to their customer service.
Havent flown the plane as keeping as replacement for when my HK Pitts Special falls apart or perishes

NewToHobbyKing | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 19, 2013

Mine arrive a couple of days ago. Thank you Hobby King for double boxing. The outer box had a 12 inch crease on the boxt and if not for double boxing the plane would be a right off. Plane very good but it has a lot of plastic parts. A large plastic cowl. It has a large cockpit window and the plastic goes all the way to the nose.

john | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 28, 2013

Lots of bits missing from mine , only one pushrod , screws missing , and as usual the clevices where rubbish , DO NOT USE THE PLASTIC CLEVICES the little plastic pin snaps off immediately
I havent flew this yet so will not comment on how it flies, not sure how long the motor and esc will last, and the servos are also crap.

Thomas | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 24, 2013

Yust received this plane, everything looks great.
But it is not plug and fly!!!
There is too much to to! It is like other ARF models. Ok, the electronics are included and mounted, but no servo horns, push rods, hinges for elevator and rudder...

  1. 1
  2. 2
  3. 3
  4. 4
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires