New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Fibre de carbone Hélice 10x4.7 Noir (CW / CCW) (2pcs)

Fibre de carbone Hélice 10x4.7 Noir (CW / CCW) (2pcs)

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

7,04 €
Statut:
En stock.
SKU:
445000011
WANT FREE SHIPPING? Click here to find out more!

10x4.7 SF fibre de carbone Hélices L / H et R / H Rotation (2 pcs)

Ces accessoires de carbone sont très rigides et lighweight, elles sont idéales pour votre projet multi-rotor, très efficace et de donner plus de puissance avec moins de consommation de courant.

Spécifications:
Diamètre: 10 pouces
Pitch: 4.7 pouces
Hub Epaisseur: 8mm
Diamètre de l' arbre: 5 ~ 6 mm ( en utilisant des adaptateurs)
Poids: 10g chaque hélice

  • UGS 445000011
  • Brand HobbyKing
  • Poids 50.0000
  • Longueur 120.00
  • Largeur 10.00
  • la taille 45.00
  • Diamètre X ( pouces ) 10.00
  • Emplacement Y ( pouces ) 4.70
  • Rotation CW/CCW
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

These are really nice propellers. But i find them a bit expensive.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are really nice propellers. But i find them a bit expensive.

Using the props with my tarrot hexa with PRODUCT ID: D2830-111000
D2830-11 1000kv Brushless Motor

Not all props are balanced but with a diy prop balancer and som sand paper is managed to get them balanced.

Props flying good only have one cracked until now.

nice props for your money

Specs:
Rpm/V: 1000kv
Shaft: 3.17mm
Voltage: 2S~4S (7.4v to 14.8v)
Weight: 52g
Watts: 210w
Max Current: 21A
ESC: 30A
Suggested Prop: 8x4 (4S) ~ 10x7 (2S)
Mounting Hole Bolt Circle: 16mm or 19mm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using the props with my tarrot hexa with PRODUCT ID: D2830-111000
D2830-11 1000kv Brushless Motor

Not all props are balanced but with a diy prop balancer and som sand paper is managed to get them balanced.

Props flying good only have one cracked until now.

nice props for your money

Specs:
Rpm/V: 1000kv
Shaft: 3.17mm
Voltage: 2S~4S (7.4v to 14.8v)
Weight: 52g
Watts: 210w
Max Current: 21A
ESC: 30A
Suggested Prop: 8x4 (4S) ~ 10x7 (2S)
Mounting Hole Bolt Circle: 16mm or 19mm

pale in carbonio 10x4.7

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

pale in carbonio 10x4.7

Nit picking: some scuff marks/scratches on one blade and the hub looks like it was formed by annealed finger putty. The O-rings are an easy fit, not loose, but far from tight. Slight balancing required (of course). But for the price and carbon fibre over plastic - these are great. I can't really fault them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nit picking: some scuff marks/scratches on one blade and the hub looks like it was formed by annealed finger putty. The O-rings are an easy fit, not loose, but far from tight. Slight balancing required (of course). But for the price and carbon fibre over plastic - these are great. I can't really fault them.

Ottime eliche, sicuramente da bilanciare. Alcuni punti su alcuni esemplari mancano della resine e possono essere fonte di pericolo. Nel mio caso, la mancanza di resina solo superficiale e davvero minima.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ottime eliche, sicuramente da bilanciare. Alcuni punti su alcuni esemplari mancano della resine e possono essere fonte di pericolo. Nel mio caso, la mancanza di resina solo superficiale e davvero minima.

not very good quality. of the 3 pairs that arrived, 3 pieces were so out of balance i had to cover the whole underside with one and a half layers of tape to balance it. finish is smooth when it's ok, but alot of rough patches. one arrived with a chip in the blade too, has alot of carbon dust so please please wash them before you use them. don't inhale the dust, it's poisonous

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

not very good quality. of the 3 pairs that arrived, 3 pieces were so out of balance i had to cover the whole underside with one and a half layers of tape to balance it. finish is smooth when it's ok, but alot of rough patches. one arrived with a chip in the blade too, has alot of carbon dust so please please wash them before you use them. don't inhale the dust, it's poisonous

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!