Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Case Set Pour MultiWii PRO Flight Controller Et MTK Module GPS

Generating Links

Case Set Pour MultiWii PRO Flight Controller Et MTK Module GPS

Prix:

Now save économisez 5,28 € 5,28 €

Special Price 2,87 € 2,87 €

You save économisez 5,28 € 5,28 €

Was  8,15 €

Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
387000041-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Le nouveau boîtier moulé fixé pour la pro MultiWii et le module GPS MTK est un excellent moyen de protéger votre FC et terminer votre installation. Le cas conserve un accès complet aux 3 ports série, entrées, sorties, reset et un port USB. Le cas GPS est livré avec un grand piédestal 100mm monter et est livré avec le matériel de montage.

Ceci est l'accessoire idéal pour montrer et protéger votre MultiWii Pro

Spécifications:
Poids: FC cas 13g, GPS cas 16g avec piédestal
Taille FC: 14x52x72mm
Taille GPS: Socle 15x53mm tige 100mm

  • Multi Wii Pro Case Set
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Riotnuts | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 16, 2015

he new molded case set for the MultiWii pro and the MTK GPS module is a great way to protect your FC and finish off your install. The case retains full access to the 3 serial ports, inputs, outputs, reset and USB port. The GPS case comes with a 100mm tall pedestal mount and comes with mounting hardware.

VTPete | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 17, 2015

As others have already mentioned, the case is great, but doesn't have holes cut out for all the possible pins. I wanted to use bluetooth, so I needed to do a bit of "plastic surgery" on the case. Also, the GPS puck is a good, clean install, but the MTK GPS board doesn't quite fit right. You have to run the wires very carefully and then push the two halves together fairly forcefully to join them; but in the end it does indeed work. I'm ordering my second one for my second unit.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 11, 2015

??? ??? ?? ??? ?? ????? ???? ????.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 17, 2015

The case for the multiwii fits good, just a few scratches on the case. The case of the GPS fits also well for the GPS-board, but you just need to dremel away a little part of the case to not crush the connector cables to the outside.

darasol | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 30, 2014

Nice case. I soldered my bluetooth module directly to the board and took the cable through the hole of serial port 1 which is unused. So I had not to cut a new hole in the case.

WTWUK | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 25, 2014

Well this is a nice little casing for the MultiWii Pro. However, it is a pity a little more thought went into the design and made provision for all ports to be used. As it is, just the basics are catered for - and you need to cut your own slots for additional ports that can be used for the likes of the OLED and Bluetooth connections etc. The GPS sensor housing is rather quaintly named 'HolyBro Hobby'. A religious brother housing! hahah! The MTK module fits, but the woring from it has to be bent very tightly to exit the casing. Other than that, it really is worth every penny.

Jake | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2014

Not all GPS modules will fit in the case, but this can just be fixed by using longer screws to tighten the GPS together.

Ben | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 27, 2014

Reasonable case, but as others have mentioned the gps doesn't fit properly. I think the gps case was designed for a different gps. Also the plastic standoffs moulded into the case don't line up exactly with the holes in the multiwii pro board. There are no holes that go all the way through so you can't bolt this case to your frame, unlike the bare board. The supplied screws don't have enough thread to fully bite into the plastic, so it is really easy to strip them. I ended up drilling out the frame so I could run some bolts through the FC mounting holes, which then holds the case together as well. Better than nothing, but this is not a high quality component.

Coxzie | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 05, 2014

Worth every penny and a must have

Capt. Peter | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 28, 2014

Useless! I tried to dry fit everything in and realised that i needed to do some cutting and shaving to get the board and GPS to fit. COULDN'T BE BOTHERED - so it's in the box until i find time to butcher it! I did read the reviews before i bought, so knew what to expect :-p

  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!