Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Corona 2.4Ghz JR Module & Rx (V2 DSSS)

Generating Links

Corona 2.4Ghz JR Module & Rx (V2 DSSS)

Prix:

Now save économisez 0,00 € 0,00 €

30,65 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
RP8JII-2.4G
Livraison gratuite? Cliquez ici pour apprendre plus!

Corona 2.4Ghz JR système module de remplacement.
Le système de 2.4Ghz Corona remplace le module standard de JR sur la plupart des systèmes JR PPM équipés d'un module FM.

Spec.

Taille: 23mm * 37mm * 12mm
Tension: 4,8 V - 6V
Plage: plus de 2100m
Courant de fonctionnement: 30 MA
Sensibilité: 100dBm
Latence: 22ms

Inclus.
JR Module 2.4Ghz
Antenne
Récepteur 2.4Ghz

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Krzysztof | Acheteur vérifié

  • Overall
  • Quality
  • Value

Size :(

Feb 24, 2018

The module works well, but its size is too small and causes it to be too loose in 9xr turnigy pro, 9x is better but not perfectly like with frsky modules.

Udo | Acheteur vérifié

  • Overall
  • Quality
  • Value

Problems with installation in the Taranis transmitter

Dec 09, 2016

I bought this module for my Taranis transmitter. But it was not possible to plug it in. It did not fit. So I disassembled the module to find out why. Without the case it was possible to plug in the circuit board alone. The position of the board was a fraction of a mm to high. So I inserted the empty case of the module first, then the circuit board. That worked. With a little pushing and pressing I could also insert the cover. Now the activation and binding to the receiver was a breeze.

ChristianP | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 30, 2015

The range is not as good as with the stock turnigy 9x module and rx but more importantly, this glitches and loses signal in flight. It worked on the ground but the last two flights it resulted in crash due to radio failure. Luckily it is a cheap plane and only the nose wheel was damaged. Just wonder how they can sell this, according to rcmodelreviews there are other reports of this kind of behaviour, I am going for FrSky instead.

Denis:) | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 23, 2014

Very good module. I have tested it on the distance 2 km with stock antenna.
http://youtu.be/tT6RE_nutWM

Denis:) | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 03, 2014

Just received this one, looks good, but:
1) After binding procedure, TX module LED all time is RED, instead of Yellow a/p manual, range was not tested, but it works.
2) FAILSAFE not working properly - after power off the receiver, F/S setups erasing all the time!!! HOW TO PERFORM IT???? I am using 9XR and DJI Naza M lite.
So, better I will buy FrSky ...

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 20, 2014

Didnt check range but it works.

jose pop | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 15, 2013

Compr este modulo hace un ao y todava no lo he probado en vuelo, en tierra va bien, siempre que no este cerca de transmisiones de carbono o metlicas, lo he instalado en una turnigy 9x y encaja perfectamente.

Pavel Alexandrovich | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 24, 2013

Bought two of these. One has range about 30 meters, other just smoked, burned and died during first power on. Complete trash.

fastmurx | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 23, 2013

Fits into an old Graupner MC18, works perfect, no binding problems, just check whether you are in PCM modus, I did not check maximum distance because I just use it for parksize depron models, but 500m no problem at all.

Zeeshan Khan | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 23, 2013

One of the best Module I use for Turnigy 9x 9ch Tx/Rx when i first buy Turnigy 9ch it never loose signal but after few crash i saw it loosing signal when i flight my scratch build and other brand they loose signal and crash after I search in HK I See that module and it fit perfect never loose signal. I comment very late i use more than 1 year plus and I also recommended to my friend and I already order for my frd Thx to Hobbyking for best product and low prices Value :)

Fichiers clients
Bind procedure Download [4]
Corona CR8D - manual.jpg Download [808]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!