New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Corona 2.4Ghz JR Module & Rx (V2 DSSS)

Corona 2.4Ghz JR Module & Rx (V2 DSSS)

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

27,81 €
Statut:
Backorder
SKU:
RP8JII-2.4G
WANT FREE SHIPPING? Click here to find out more!

Corona 2.4Ghz JR système module de remplacement.
Le système de 2.4Ghz Corona remplace le module standard de JR sur la plupart des systèmes JR PPM équipés d'un module FM.

Spec.

Taille: 23mm * 37mm * 12mm
Tension: 4,8 V - 6V
Plage: plus de 2100m
Courant de fonctionnement: 30 MA
Sensibilité: 100dBm
Latence: 22ms

Inclus.
JR Module 2.4Ghz
Antenne
Récepteur 2.4Ghz

  • UGS RP8JII-2.4G
  • Brand Corona
  • Capacité ( mAh ) -
  • Poids 191.0000
  • Longueur 175.00
  • Largeur 43.00
  • la taille 125.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The range is not as good as with the stock turnigy 9x module and rx but more importantly, this glitches and loses signal in flight. It worked on the ground but the last two flights it resulted in crash due to radio failure. Luckily it is a cheap plane and only the nose wheel was damaged. Just wonder how they can sell this, according to rcmodelreviews there are other reports of this kind of behaviour, I am going for FrSky instead.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The range is not as good as with the stock turnigy 9x module and rx but more importantly, this glitches and loses signal in flight. It worked on the ground but the last two flights it resulted in crash due to radio failure. Luckily it is a cheap plane and only the nose wheel was damaged. Just wonder how they can sell this, according to rcmodelreviews there are other reports of this kind of behaviour, I am going for FrSky instead.

Very good module. I have tested it on the distance 2 km with stock antenna.
http://youtu.be/tT6RE_nutWM

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good module. I have tested it on the distance 2 km with stock antenna.
http://youtu.be/tT6RE_nutWM

Just received this one, looks good, but:
1) After binding procedure, TX module LED all time is RED, instead of Yellow a/p manual, range was not tested, but it works.
2) FAILSAFE not working properly - after power off the receiver, F/S setups erasing all the time!!! HOW TO PERFORM IT???? I am using 9XR and DJI Naza M lite.
So, better I will buy FrSky ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received this one, looks good, but:
1) After binding procedure, TX module LED all time is RED, instead of Yellow a/p manual, range was not tested, but it works.
2) FAILSAFE not working properly - after power off the receiver, F/S setups erasing all the time!!! HOW TO PERFORM IT???? I am using 9XR and DJI Naza M lite.
So, better I will buy FrSky ...

Didnt check range but it works.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Didnt check range but it works.

Compr este modulo hace un ao y todava no lo he probado en vuelo, en tierra va bien, siempre que no este cerca de transmisiones de carbono o metlicas, lo he instalado en una turnigy 9x y encaja perfectamente.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Compr este modulo hace un ao y todava no lo he probado en vuelo, en tierra va bien, siempre que no este cerca de transmisiones de carbono o metlicas, lo he instalado en una turnigy 9x y encaja perfectamente.

Bought two of these. One has range about 30 meters, other just smoked, burned and died during first power on. Complete trash.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought two of these. One has range about 30 meters, other just smoked, burned and died during first power on. Complete trash.

Fits into an old Graupner MC18, works perfect, no binding problems, just check whether you are in PCM modus, I did not check maximum distance because I just use it for parksize depron models, but 500m no problem at all.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fits into an old Graupner MC18, works perfect, no binding problems, just check whether you are in PCM modus, I did not check maximum distance because I just use it for parksize depron models, but 500m no problem at all.

One of the best Module I use for Turnigy 9x 9ch Tx/Rx when i first buy Turnigy 9ch it never loose signal but after few crash i saw it loosing signal when i flight my scratch build and other brand they loose signal and crash after I search in HK I See that module and it fit perfect never loose signal. I comment very late i use more than 1 year plus and I also recommended to my friend and I already order for my frd Thx to Hobbyking for best product and low prices Value :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

One of the best Module I use for Turnigy 9x 9ch Tx/Rx when i first buy Turnigy 9ch it never loose signal but after few crash i saw it loosing signal when i flight my scratch build and other brand they loose signal and crash after I search in HK I See that module and it fit perfect never loose signal. I comment very late i use more than 1 year plus and I also recommended to my friend and I already order for my frd Thx to Hobbyking for best product and low prices Value :)

Produit excellent en qualit. Porte prvue de 2.5km teste 300 mtres sans problme. Appairage ultra facile

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Produit excellent en qualit. Porte prvue de 2.5km teste 300 mtres sans problme. Appairage ultra facile

??? ?? ??? ????. ???.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

??? ?? ??? ????. ???.

Customer files
Bind procedure Download [4]
Corona CR8D - manual.jpg Download [808]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!