New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

4,6 kg Corona DS238HV Métal numérique Vitesse Servo / 0,13 Sec / 22g

4,6 kg Corona DS238HV Métal numérique Vitesse Servo / 0,13 Sec / 22g

Shipped From:
  • Global
QTY:

Now save enregistrer 1,64 € 1,64 €

Special Price 6,59 € 6,59 €

You save enregistrer 1,64 € 1,64 €

Was  8,23 €

Statut:
En stock.
SKU:
014000001
WANT FREE SHIPPING? Click here to find out more!

4,6 kg Corona DS238HV Métal numérique Vitesse Servo / 0.13sec / 22g

Modèle: DS238HV
Tension de fonctionnement: 6.0V / 7.4V
Courant de fonctionnement: 300mA / 400mA
Vitesse de fonctionnement: 0.14sec.60º / 0.13sec.60º
Stall Couple: 4kg.cm / 4.6kg.cm
Taille: 29X13X30mm
Poids: 22g
Bande morte: ≤3uSec
Voyage de fonctionnement: 40º / une impulsion latérale 400US voyage
Potentiomètre: 3 curseur / Direct Drive
Roulement à billes: MR106
Boîte de vitesses: Métal
Fil de connecteur: 300mm
Température de fonctionnement: -20C + 60c

  • UGS 014000001
  • Brand Corona
  • Poids 46.0000
  • Longueur 76.00
  • Largeur 32.00
  • la taille 51.00
  • Couple ( kg ) ( min . 0,01 kg ) 4.60
  • Vitesse ( Sec / 60deg ) 0.13
  • A (mm) 35.00
  • B ( mm ) 29.00
  • C ( mm ) 31.00
  • D (mm) 13.00
  • E ( mm ) 40.00
  • F ( mm) 19.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Incredible good servo for an incredible good prize! Highly recommended, I will buy more. Superfast shipping from the global shop to Europe included. Thanks HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Incredible good servo for an incredible good prize! Highly recommended, I will buy more. Superfast shipping from the global shop to Europe included. Thanks HK.

very economic and usefull servo, as you see, its very cheap and you can use 7.4v high voltage.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very economic and usefull servo, as you see, its very cheap and you can use 7.4v high voltage.

I bought this item it is grosly over rated it burned op on the frist use its rated at 4.6 kg.cm should be rated at 1 kg.cm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this item it is grosly over rated it burned op on the frist use its rated at 4.6 kg.cm should be rated at 1 kg.cm

very goog servo hard and fast

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very goog servo hard and fast

It's been the rudder servo in my Soling sail boat for 2 years now with a Life 2S battery. Absolutely perfect.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's been the rudder servo in my Soling sail boat for 2 years now with a Life 2S battery. Absolutely perfect.

Nice servo, But there is quite some slop in all the servo arms on both of the 2 I bought, the screw for the drive shaft is about the worst quality I have ever seen. Head not centered very badly pressed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice servo, But there is quite some slop in all the servo arms on both of the 2 I bought, the screw for the drive shaft is about the worst quality I have ever seen. Head not centered very badly pressed.

Performs as advertised. Very strong. Slight differences in size (all measurements are in mm # in () is diff from Product Config Table): A = 34.60 (-.4), B = 28.93 (-.07), C = 30.21 (-.79), D = 11.48 (-1.52), E = 39.75 (-.25), F = 19.99 (plus.99)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Performs as advertised. Very strong. Slight differences in size (all measurements are in mm # in () is diff from Product Config Table): A = 34.60 (-.4), B = 28.93 (-.07), C = 30.21 (-.79), D = 11.48 (-1.52), E = 39.75 (-.25), F = 19.99 (plus.99)

Used this servo for a replacement in my 1/16 e revo, lots of power, found it to be a little bit on the slower side, but you can't beat the price for a metal gear servo anywhere, the fit is snug but will slide in if you undo the front battery vent cover first, also used a hk45 amp esc, and the hk donkey 380 (4200kv) motor, I could make this setup 3 times to one stock setup, thanks again hk!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used this servo for a replacement in my 1/16 e revo, lots of power, found it to be a little bit on the slower side, but you can't beat the price for a metal gear servo anywhere, the fit is snug but will slide in if you undo the front battery vent cover first, also used a hk45 amp esc, and the hk donkey 380 (4200kv) motor, I could make this setup 3 times to one stock setup, thanks again hk!!!

?????? ? ???????

:)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

?????? ? ???????

:)

Just received the first one. Good servo; strong and fast. Robust horns, but they do not fit very well (a bit sloppy; screw to be very well tightened). Comes with side mounts; it would be nice if these became separately available as they also fit on 929/939 series.

"Actual size" as mentioned on the box is not the actual size!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received the first one. Good servo; strong and fast. Robust horns, but they do not fit very well (a bit sloppy; screw to be very well tightened). Comes with side mounts; it would be nice if these became separately available as they also fit on 929/939 series.

"Actual size" as mentioned on the box is not the actual size!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!