Prix total

0,00 €

Panier 0 Panier 0 Loading...

Corona DS633BP Micro numérique 0,82 kg / 0.12sec / 6.2g

Generating Links

Corona DS633BP Micro numérique 0,82 kg / 0.12sec / 6.2g

Prix:

Now save économisez 0,00 € 0,00 €

6,32 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
014000021
Livraison gratuite? Cliquez ici pour apprendre plus!

Corona DS-633BP Digital Servo 0,82 kg / 0.12sec / 6.2g

Spec.
Modèle: DS633BP
Tension de fonctionnement: 4.8V / 6.0V
Vitesse de fonctionnement: 0.12sec.60º / 0.10sec.60º
Stall Couple: .82kg.cm /.95kg.cm
Taille: 23.5x9.5x19.5mm
Poids: 6.2g
Bande morte: ≤5uSec
Boîte de vitesses: Plastique
Fil de connecteur: 215mm
Température de fonctionnement: -20C + 60c

  • Servo Couple ( kg ) ( min . 0,01 kg ) 0.82
  • Servo Vitesse ( Sec / 60deg ) 0.12
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

MrEd | Acheteur vérifié

  • Overall
  • Value
  • Quality

Great little servo

Feb 06, 2019

Arm splines are very tight. Nice package with isolator mounts, servo is precise and strong. This is gonna be my go-to servo for parkflyers.

TONY | Acheteur vérifié

  • Overall
  • Value
  • Quality

Ds633bp

Dec 06, 2018

Great servos accurate, fast and strong. Gears are a little weak under shock loads. Look like gws pics servos but a little taller. Recommended.

Radek | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Apr 05, 2015

I just did a bench test, since the servo seemed to be stronger than the specs say, and the torque (dynamic) was really 1.25kg/cm at 5V!!! Great servo for the buck...

| Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 12, 2015

?? ????? ???? ?????. ??? ???? ?? ??? ??? ?? ???? ??? ????. ? ????? ?????.

nigel | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Mar 12, 2014

OK got these in my blaster in pod now too and they are great, the ones in the wings have 111 hours flying time in them.

kyus74 | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Feb 17, 2014

Overall great servo for small electric planes, though are not suitable for 1.5m DLG as the gears dont hold up to hard launches. Small,light,fast and with almost zero slop.

nigel | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Sep 28, 2013

Seems to be a good servo,
I have 2 in my blaster dlg wing and so flown 30hrs on them, fast and precise, torque seems adequate for the job but no stronger then it needs to be, so as long as .82kg/cm is enough for you these should be good.
BTW they have survived a crash and still work.

nigel | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Aug 13, 2013

Bench tested only but seem good as has been said, fast enough and accurate not sure how strong they are but time will tell. Gonna use them in my blaster dlg wing and will report again how it goes.

Cronselaar | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Aug 09, 2013

Over all in consensus with Fireball. New benchmark for cheap DLG solution. Servos are extremely fast with very good response and centering. No noticeable slop. Nice super thin wiring with a total weight of 6.44g with servo arm. Nice set of supplied servo horns and even rubber grommets.

Diogen151 | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jun 22, 2013

Overall it is good servo: fast, precise, not so strong but sturdy for it size.
Inspection reveals this is GWS pico servo with new electronics.

  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!