Compatible avec Futuba Fasst transmetteurs de la Corona R14FA offre une alternative abordable pour les utilisateurs de radio Futaba.
Courant de fonctionnement:
70mA @ Mode FASST de 7ch normal et 110 mA max,
80mA @ mode multi-canal FASST normal et 110 mA max
Tension de fonctionnement: 4.0 ~ 10V
7MS pour la grande vitesse PPM (HS), 14ms pour le mode à faible vitesse PPM (LS) @ FASST multi-canal,
8ms pour la grande vitesse PPM (HS), 16 ms pour la basse vitesse PPM (LS) @ FASST Mode 7ch
Sensibilité: -96dBm ~
Fail Safe: Oui
Longueur de l' antenne: 136mm
FUTABA FASST émetteurs 2.4GHz
TM7, TM8, TM10, TM14, 6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG
I have 3 of these recievers and use them with a futaba 14sg on range test mode with antanae pointing away they do 50 meters easily which is further than some of my futaba recievers ,can somebody tell me how to get channels 13 and 14 to work with my radio and these recievers?Channels 13 and 14 work with my futaba 14 channel recievers but not these coronas so maybe I need to change something in settings?
THANK YOU HK FOR THIS AFFORDABLE ALTERNATIVE TO GENUINE RECIEVERS!
PS I HOPE CORONA BRINGS OUT AN 18 CHANNEL SOON !Excellent in my four and five metre gliders at extreme range. My transmitter is a Robbe Futaba FC-18 with a Futaba TM-8 2.4 ghz module installed. An excellent receiver which I recommend to all FASST users.Just bought my second one after using the first for two years in my 4metre scale ASH26 glider without any problems and this purchase will go into another large scale glider . It is bound to a Robbe Futaba FC18 with a TM8 module and works beautifully!good Corona R14FA 2.4Ghz Fasst Compatible ReciverEl mas alto de la gama
12 conectores en vertical y dos en horizontal.
Sin ningn problema , sistema FASST .
Buen producto a buen precioWorks flawless with futaba 10CG. I use it with planes and quads and hexacopter. Just bind, plug and fun. Nice product ! Will buy more.... I have not tested range...the equivalent Futaba one can give 2km strait line without problem..If you have a Return to home system in case of no-reception, there's no problem. If you fly behind an obstacle (happens sometimes while doing FPV), you may lose signal...so enable failsafe and RTH....I probably have close to 10 of these installed in models of various complexity. They pair and work flawlessly with my Futaba 8FG (a 14-channel TX). Phenomenal value and so far, knock on wood, I have not experienced a single failure or noticed any loss of signal events. For the price you can't beat this RX. It is a bit large but let's be honest, most planes that can take advantage of 10 channel setups aren't small anyway.I have 4 of those receiver 14FA, are good, i had been using for a year in my turbine jets, Works very fine, and never a trouble, i recommend it, i was thinking why Futaba asking too high prices for 14 cannel Rx, thanks HK for sell Corona alternatives in Receiver.
Note: I only recommend Receiver, never servos even micro servos, are terrible bad.Very impressive quality receiver at low price! Just buy it!big receiver but perfect at all!