New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Corona R4FA-SB 2.4Ghz FASST Compatible S.BUS Receiver

Corona R4FA-SB 2.4Ghz FASST Compatible S.BUS Receiver

Shipped From:
  • USA
QTY:

Now save enregistrer 0,00 € 0,00 €

20,95 €
Statut:
En stock.
SKU:
014000019
WANT FREE SHIPPING? Click here to find out more!

Le CORONA 2.4GHz R4FA-SB Spread Spectrum FASST Compatible récepteur est conçu pour une utilisation avec les émetteurs FASST 2.4GHz de FUTABA; y compris le 15 heures, 3PKS, 3VCS, 3GR, 4P (S), TM7, TM8, TM10, TM14 et T6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG. Le récepteur R4FA-SB fournit un mode plus utile pour les utilisateurs. Le R4FA-SB supporte pas le système d'air FASST de seulement FUTABA, mais les systèmes de surface FASST ainsi. Ce récepteur prend en charge jusqu'à 7 canaux avec PPM sortie continue (positive et négative), la sortie RSSI et de sortie S.BUS.

En mode de sortie S.BUS, R4FA-SB fournit 12 voies proportionnelles et 2 canaux DG. Par conséquent, le R4FA-SB devient un récepteur 14 canaux lorsque la sortie S.BUS.

Spécifications:
Courant de fonctionnement: 50mA max
Tension de fonctionnement: 3,6 ~ 10V
Latence:
14ms pour la sortie 4 canaux et une sortie indépendante S.BUS @ mode multi-canal FASST
21ms pour
la sortie PPM continue et la sortie RSSI @ mode multi-canal FASST
16 ms pour
la sortie 4 canaux et une sortie indépendante S.BUS @ Mode 7ch FASST
24ms pour
la sortie PPM continue et la sortie RSSI @ Mode 7ch FASST
14ms pour système indépendant de surface
de sortie @ FASST 3 canaux C1 mode CODE
Sensibilité: environ -100dBm
Température de fonctionnement: -10 ~ 80 ° C
Dimensions: 41x21x8mm
Poids: 8g

  • UGS 014000019
  • Brand Corona
  • Capacité ( mAh ) -
  • Poids 31.0000
  • Longueur 145.00
  • Packaging Width 24.00
  • la taille 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bought one and got the same problem as McClean. For binding no problem but for changing mode it'is really aleatory pressing long time, short time, slowly, rapidly. What the QC sticker means? Why spending time and money to put this sticker???

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought one and got the same problem as McClean. For binding no problem but for changing mode it'is really aleatory pressing long time, short time, slowly, rapidly. What the QC sticker means? Why spending time and money to put this sticker???

The FS/Bind button does not work. I had to use a jumper to jump between the button pads to bind and change modes. Ironically, I had to break the "QC Passed" sticker to fix it.



Once bound, it seems to work just fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The FS/Bind button does not work. I had to use a jumper to jump between the button pads to bind and change modes. Ironically, I had to break the "QC Passed" sticker to fix it.



Once bound, it seems to work just fine.

perfect tiny compact size for mulirotor using the S-Bus option. mine seemed to work fine and bound up with my tx no troubles I just read the instructions 3 times over before I tried it. the only issue I had with it was the tiny instruction page with very tiny writing but I managed and it performs better than expected.

Thanks again HK for a painless transaction.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

perfect tiny compact size for mulirotor using the S-Bus option. mine seemed to work fine and bound up with my tx no troubles I just read the instructions 3 times over before I tried it. the only issue I had with it was the tiny instruction page with very tiny writing but I managed and it performs better than expected.

Thanks again HK for a painless transaction.

Got this RX with pushbutton not working. As I can see in other reviews, it seems to be common problem. They should consider NOT placing a "QA passed" sticker on it in future.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got this RX with pushbutton not working. As I can see in other reviews, it seems to be common problem. They should consider NOT placing a "QA passed" sticker on it in future.

I have used this Receiver in a glider and flew as high as I was able to see it and in PPM special Mode on a 450 Quadrocopter without any troubles. Binded in under a second. To change into special Mode just hold the button for 5 seconds and then release it before 6 seconds have passed. When red and green are flashing simply push it again and you're done. Make sure to (re)bind it after every output mode change.
weight with case 7.3g w/o 3.7g
So I am totally happy with it and gonna buy another one :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have used this Receiver in a glider and flew as high as I was able to see it and in PPM special Mode on a 450 Quadrocopter without any troubles. Binded in under a second. To change into special Mode just hold the button for 5 seconds and then release it before 6 seconds have passed. When red and green are flashing simply push it again and you're done. Make sure to (re)bind it after every output mode change.
weight with case 7.3g w/o 3.7g
So I am totally happy with it and gonna buy another one :)

I've ordered 4 of the R4FA-SB receivers. One of them was not binding - i could fix this with spraying electronic-contactspray in it (position where the button is). After pressing serveral times it works. But a strange feeling remains, so im using this receiver only for wireless simulator on pc.

The bigger problem was switching to specialoutput mode for sbus and ppm. Its NOT WORKING like descriped in the manual. I tried it a long time, but nothing. Another user told me, he had the same problem. I was very frustrated so i started to test pressing several times long, short, hammering on the button. After 30sec-1minute the receivermode switched from slowly blinking red to fast blinking red. I checked SBUS output, its working. I could bring all 4 receivers to specialoutput mode with pressing stupidly on the button 40sec to 1 minute. I dont know how to do this correctly, the way descriped in the manual is not working!


I don't know if the receivers range and reliability is ok, but the feeling with the descriped problems above is not good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've ordered 4 of the R4FA-SB receivers. One of them was not binding - i could fix this with spraying electronic-contactspray in it (position where the button is). After pressing serveral times it works. But a strange feeling remains, so im using this receiver only for wireless simulator on pc.

The bigger problem was switching to specialoutput mode for sbus and ppm. Its NOT WORKING like descriped in the manual. I tried it a long time, but nothing. Another user told me, he had the same problem. I was very frustrated so i started to test pressing several times long, short, hammering on the button. After 30sec-1minute the receivermode switched from slowly blinking red to fast blinking red. I checked SBUS output, its working. I could bring all 4 receivers to specialoutput mode with pressing stupidly on the button 40sec to 1 minute. I dont know how to do this correctly, the way descriped in the manual is not working!


I don't know if the receivers range and reliability is ok, but the feeling with the descriped problems above is not good.

Customer files
Manual_Corona_R4FA-SB.pdf Download [407]
No File Name Download [407]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!