Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Corona R6DM 2.4GHz DMSS Compatible 6Ch Micro S.bus Receiver

Generating Links

Corona R6DM 2.4GHz DMSS Compatible 6Ch Micro S.bus Receiver

Prix:

Now save économisez 0,00 € 0,00 €

15,06 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
014000044-0
Livraison gratuite? Cliquez ici pour apprendre plus!

The Corona R6DM 2.4GHz DMSS compatible 6Ch receiver is designed for use with JR DMSS 2.4GHz transmitters, such as XG6/XG7/XG8/XG11 and XG14 that use DMSS RF protocol.

When working in "Special mode" the R6DM can output up to 8 channels using S.bus to allow greater flexibility in performance as well as a convenient way to reduce the wire count in tight installations.

 

Features:
• 6 Channel micro receiver (normal mode)
• <8 channels in special mode
• Low latency
• S.bus output (special mode)
• Twin antennas for signal security

 

Specs:
Voltage: 3.6 ~ 8.5V
Max Current: 60mA max
Operating temp: -10 ~ 70°C
Latency: <14mS
Sensitivity: -98dBm
Dimensions: 45 x 18 x 8mm
Weight: 8g

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

BESSON | Acheteur vérifié

  • Overall
  • Quality
  • Value

parfait avec JR XG8

Oct 05, 2017

Pas encore testé la portée mais jamais eu de problèmes avec les récepteurs Corona.
Bind immediat avec XG8 sans même mettre le TX en mode binding. Il suffit de suivre la notice.
ATTENTION: chaque modèle a sa propre signature émetteur donc si vous changez de modèle, il faut refaire le bind du RX.
C'est parfait, je recommande.

Jorge | Acheteur vérifié

  • Overall
  • Quality
  • Value

great receivers

Sep 08, 2017

They're great receivers you have to check the way you plug the connectors. The ground goes facing the binding button if you reverse the polarity (the ground facing up the sticker) the red light will turn on but not going to bind i found this the main cause for people with binding concerns, the instructions says two ways to bind, one is specifically for the XG7 and the other way is for all transmitters including the JR XG series but not the XG7 hope this helps.

Jorge | Acheteur vérifié

  • Overall
  • Quality
  • Value

great receivers

Sep 03, 2017

They're great receivers you have to check the way you plug the connectors. The ground goes facing the binding button if you reverse the polarity (the ground facing up the sticker) the red light will turn on but not going to bind i found this the main cause for people with binding concerns, the instructions says two ways to bind, one is specifically for the XG7 and the other way is for all transmitters including the JR XG series but not the XG7 hope this helps.

SMC | Acheteur vérifié

  • Overall
  • Quality
  • Value

Great value receiver

Jul 16, 2017

Brilliant cost effective alternative to genuine JR receivers. I have 4 of these in various aircraft with my XG14 and they have been 100% reliable. Bit tricky to bind and you must follow the instructions EXACTLY. Don't use the JR transmitter bind option in system menu as there is no telemetry.

Cliff | Acheteur vérifié

  • Overall
  • Quality
  • Value

So far not good

May 24, 2017

bought two for my XG8, one wont power on and the other wont bind.. so cant say they are any good, awaiting refund/replacement

Cliff | Acheteur vérifié

  • Overall
  • Quality
  • Value

So far not good

May 24, 2017

bought two for my XG8, one wont power on and the other wont bind.. so cant say they are any good, awaiting refund/replacement

Fichiers clients
Manual Download [21]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!