Prix total

0,00 €

Panier 0 Panier 0 Loading...

Capteur de courant pour OrangeRx Telemetry System

Generating Links

Capteur de courant pour OrangeRx Telemetry System

Prix:

Now save enregistrer 8,28 € 8,28 €

Special Price 8,13 € 8,13 €

You save enregistrer 8,28 € 8,28 €

Was  16,41 €

Quantité:
Expédié de:
  • Global
Déjà acheté
Statut:
En stock
SKU:
9171000552-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Le capteur de courant OrangeRx a été conçu pour fonctionner comme une partie intégrante du système de télémétrie OrangeRx.

Equipé avec les connecteurs XT60 populaires pour adapter directement entre votre vol batterie et ESC ou la distribution de puissance bord, le capteur de courant OrangeRx vous permet de surveiller la tension et le courant en temps réel, fournissant une source d'information précieuse pour vous d'affiner votre système d'alimentation .

Le capteur de courant peut être utilisé avec d'autres capteurs télémétriques OrangeRx pour donner un aperçu complet des performances de vos modèles.

Compatible avec le système de télémétrie OrangeRx (TM1100, TM1000, R620x, R720x, R820x, R920x, R1020x, R1220x.)

Caractéristiques:
• Simple à utiliser
• Entièrement compatible avec les derniers OrangeRx télémesure récepteurs capables
• Format compact
• Poids léger

Spécifications:
Tension maximale de la batterie: 3,7 ~ 52V (1 ~ 12S LiPoly)
Plage de mesure: 0 ~ 100A
Tension d'alimentation: 3.7 ~ 9.6V
Comsumption: 10mA
Dimensions: 58 x 25 x 12mm
Poids: 14,2 g

Note: Matching orange RX capteurs télémétriques et les modules de télémétrie sont à venir, alors assurez - vous de garder un oeil sur le site!

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

PaulB | Acheteur vérifié

  • Quality
  • Overall
  • Value

Not 100% accurate but works solidly.

Nov 26, 2020

I purchased 2 of these to uses with various Orange receivers but mainly to test the current which one of my helicopters was drawing.
I connected them both (one at a time) to a fixed wing model and with my Turnigy Power Meter at the same time. The Power Meter read 48 Amps and the sensor was reporting 38 Amps via telemetry!!
Both did the same.
I then connected a smaller fixed wing model to both the sensor and my Digital Multi Meter set to read current. This had the MMM showing 8 Amps and the sensor 6.
So, I could use the sensors to spot when I was drawing too much current by noting the 'standard' load figure and looking for a far higher current draw but I wouldn't trust it to test a set-up before selecting the correct size of ESC.
However, small light, useful and reliable (to date) and at this price, feel like I stole them.
Paul

flyer | Acheteur vérifié

  • Quality
  • Overall
  • Value

it works

Aug 18, 2020

nice part, works perfect with ORX receivers, valuable

Porcorusso | Acheteur vérifié

  • Quality
  • Overall
  • Value

Works as advertised

Mar 02, 2020

Would be nice if the circuit board were more compact

J P M. | Acheteur vérifié

  • Overall
  • Value
  • Quality

Unstable

Nov 07, 2019

Very unstable, used the sensor plugged into an orange short range telemetry unit feeding a spektrum Rx. The display on the Spektrum Dx 9 was very unstable on the Tx display and when recorded onto an SD card and viewed on the spektrum TLM viewer the trend was jumping all over the place at constant throttle positions during testing. Think this was caused by noise from the ESC. Showed min and max values fine.

Johan | Acheteur vérifié

  • Value
  • Quality
  • Overall

Good thing

Jul 22, 2019

It is always good to know how much current you draw in flight.

cuvatov | Acheteur vérifié

  • Overall
  • Value
  • Quality

Very good

Aug 03, 2018

Very good

Jamie | Acheteur vérifié

  • Value
  • Quality
  • Overall

Certified Buyer Rated

Dec 25, 2017

Great product for measuring amp draw and wattage for a power system. Also great for checking battery health and the remaining capacity percentage is very handy. But there are no markings on the case to say which way to plug in the balance leads of the battery so if you plug it in upside down with the battery plugged in it will short the battery. Otherwise a very nice product.

Jamie | Acheteur vérifié

  • Value
  • Quality
  • Overall

Certified Buyer Rated

Dec 25, 2017

Great product for measuring amp draw and wattage for a power system. Also great for checking battery health and the remaining capacity percentage is very handy. But there are no markings on the case to say which way to plug in the balance leads of the battery so if you plug it in upside down with the battery plugged in it will short the battery. Otherwise a very nice product.

Jamie | Acheteur vérifié

  • Value
  • Quality
  • Overall

Certified Buyer Rated

Dec 25, 2017

Great product for measuring amp draw and wattage for a power system. Also great for checking battery health and the remaining capacity percentage is very handy. But there are no markings on the case to say which way to plug in the balance leads of the battery so if you plug it in upside down with the battery plugged in it will short the battery. Otherwise a very nice product.

Jamie | Acheteur vérifié

  • Overall
  • Value
  • Quality

Certified Buyer Rated

Dec 23, 2017

Great to know the amp draw of the drone to ensure the greatest efficiency. Works great with the orange receivers. I unsoldered the plugs and soldered wires directly to the board to save weight. The signal plug on the board can be flimsy when plugging and unplugging the signal wires. Works well and seems to be very accurate.

  1. 1
  2. 2
Fichiers clients
Product Manual Download [136]
Current Sensor - Orange Download [166]
Current Sensor - Orange Download [166]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!