Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

D50012MG 56.7g / 5,4 kg / 0.05sec High Speed ​​MG numérique Servo

Generating Links

D50012MG 56.7g / 5,4 kg / 0.05sec High Speed ​​MG numérique Servo

Prix:

Now save économisez 0,00 € 0,00 €

27,80 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
D50012MG
Livraison gratuite? Cliquez ici pour apprendre plus!
Spec.
Couple: 4.2kg.cm à 4.8v / 5.5kg.com à 6.0V
Vitesse: 0.06sec / 60deg 4.8v / 0.05sed / 60deg 6.0V
Poids: 56.7g (.11oz)
Voltage: 4.8v ~ 6.0V
Type d' engin: Ti-Alloy
Type de moteur: Coreless haute performance
Roulement: Dual
Fiche: Type JR
  • Servo Couple ( kg ) ( min . 0,01 kg ) 5.40
  • Servo Vitesse ( Sec / 60deg ) 0.05
  • Servo A (mm) 43.00
  • Servo B ( mm ) 40.00
  • Servo C ( mm ) 41.00
  • Servo D (mm) 20.00
  • Servo E ( mm ) 57.00
  • Servo F ( mm) 29.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

enrique | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 26, 2014

I have 2 of these servos , they work great I have then on my sbach .45 , there very fast when I Let go of the stick I can't even see the servo go back to center, I using them on a rudder and elevator ...

simon4 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 10, 2013

Wow, i have to say: This is the first very good product of Hobbyking. Impressive speed, solid, lots of power. i can only recomend this one... even though it is quite pricey if you compare to other brands....

Ben | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2013

I've been using the servo on the tail of my Century Hawk Pro .32 nitro heli. It's a fantastic servo. I had been using an HK401 gyro until to day when the gyro failed. I'm trying a new gyro now, but so far I can't find any fault with the servo at all.

TurboLeon | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 24, 2013

Been using this on the tail on my 550 for some time. Very fast and seems very well made. Does not get hot while using. Also impressed how strong it is, pulled the carbon push-rod apart twice at the joint due to a jammed guide. Servo still works flawlessly.
Very happy with the servo.

herman | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 09, 2012

Use this servo for Velocity 50 in throttle and tail, use with GY611 that using 1520 pulse (service menu set), servo is very fast and strong but get hot after hard maneuver on tail, very good servo for it's price but don't work too hard on tail,,

Simon | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 30, 2012

An addition to my review from this servo:
colour is different, it comes fully black! no red in it and the case is fully plastic. Its one of the fastest servo ive seen, uses a lot of currency.
Servo DS 8418 Digital Ultra-S from Graupner has the same speed, but doesnt burn currency, but its more than the double of the price (60$).

Simon | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 29, 2012

Oh my god! This servo is super super super fast!!!! Using it for my 1:8 Serpent with a 6.6V Lipo to the receiver and futaba receiver. Whatch out!!! This servo used a lot of currency!!! So take a receiver Lipo with enoufh mAh, 700mAh is too little, i tried it and doesnt work for long. Minimum take a 1200mAh Lipo, 6.6V, set your receiver to digital servo mode and you will have the fastest servo plus it is really precice!! i only can recomend it, it is much better than the savox and futaba ones ;-)

Ben | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 17, 2012

This thing is ridiculously fast. I'm using it as a tail servo for my .30 size Century Hawk Pro nitro helicopter. Running on an HK401 gyro, it was super easy to set up and the servo is incredibly fast. I have no problems keeping the tail locked in and the gain is much lower than I used to have to use. Great servo for the money.

I.Ralenekov | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 18, 2012

This is a high quality servo from Blue Arrow (the same manufacturer of Mi Servos). I have bought 3 of these for my 600 EFL frame to use them as cyclic servos. They are great, very powerful and smooth but the grease inside is insufficient. Re-grease and enjoy :) Time will tell how durable they are.

pizzaschnitzer | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 24, 2012

wow. insane fast on buggy steering in 2WD. Power is very good (more than the servo saver can link). almost no gear play, very smooth working.

  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!