S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

Dart 450 FPV Quad-Copter Avec Power Distribution, propre et sale, éclairage LED et BT Alarm

Dart 450 FPV Quad-Copter Avec Power Distribution, propre et sale, éclairage L...

QTY:

Now save enregistrer 0,00 € 0,00 €

63,25 €
Rating:
Stock:
Poids
560 g
SKU:
9107000359-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Description
du

HobbyKing introduit une nouvelle Dart à la série. Le Dart 450 FPV H Quad est emballé avec encore plus de fonctionnalités et conserve une étiquette de prix amusant encore.

Les Dart 450 paquets quelques fonctionnalités, la conception, la durabilité, les regards et pourtant ne se cassera pas la banque. Le cadre est livré avec un système d'isolation des vibrations propres et sale, conçu pour donner le contrôleur de la caméra et vol une conduite en douceur agréable. Le Dart 450 a également construit dans le système de distribution de puissance qui monte le CES de, ainsi que le montage direct pour XT60 / T-connecteurs. Il dispose également d'un système d'éclairage de la tête d'orientation LED intégré et la queue et une alarme de basse tension liée aux LED avec buzzer ainsi que des sorties de puissance AUX pour A / V et le FC! Le cadre a des canaux de coupe CNC pour acheminer le câblage à travers le cadre, ce qui en fait l'un des plus propres installe, vous pouvez avoir.

Les bras de moteur sont agréables et costaud à 5 mm d'épaisseur pour les dommages sans accident, et de la lumière encore fait dans tous les bons endroits. La Dart a également caméra de montage options pour FPV et HD, monté en avant et hors de la vue prop. La nouvelle 450 va effacer des accessoires de 10inch et accepter les batteries aussi large que 56mm!

Si vous comparez la Dart à la compétition, la seule chose qui est moins est l'étiquette de prix.

Caractéristiques:
• Système d'isolation des vibrations propre et sale
• la distribution de puissance avec construit en montage au connecteur d'alimentation et LED spots
• alarme intégré basse tension liée à la LED et le buzzer
• 8 ~ 10 pouces prop adaptable
• Les canaux de fil de routage pour une installation propre
• bras de moteur 5 mm d'épaisseur

Spécifications:
Empattement: 450mm
Poids: 399g

Obligatoire:
Motors: 2212 ~ 2216 taille
Hélices: 8 ~ 10 pouces
contrôleur de vol: distance de montage 30-45mm
Batterie: 3 ~ 4s 2100-5400mah
5ch Radio

Product
Specifications

Informations supplémentaires

  • Référence:
    9107000359-0
  • Brand:
    Non
  • Poids (g)
    560.00
  • Longueur
    350.00
  • Largeur:
    30.00
  • Taille:
    95.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This frame is a lot of fun. With the anti vib mount she is great. It fit up to a 22XX motor with up to 30amp ESC. It come with a holder with a camera an all the hardware you need to build.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Soldering is not too great on the PDB. It's a bit heavy and a bit weak.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
There are no spares for this item, I had been waiting 2 weeks before I got a reply saying that there are no spares as I needed some arms now I have to get a new frame, don't bother buying this frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A well made frame. Nick thick arms with all the holes pre drilled. The fixings and accessories are well made with aluminium spacers and steel screws. The PDB is well equipped with pre-installed and wired LED, with two modes (Solid/Flash). Would recommend thread lock on all fixings!

The frame has plenty of room inside for all components. The PDB has plenty of pads to enable tidy wiring and easy access to power anywhere on the quad.

My spec below:

900KV ntm motors
10" props
Afro 30a ESC
5000mah 4S lipo
Hitec Rx/Tx

Couple of issues with the frame however.

1. No nylon stand offs for the FC
2. No Nylon screws for the Vibration Dampers
3. Black Dampers are far too soft. Change to Blues

The above 3 points are all standard on the Dart 400, not sure why this doesn't get the same treatment. Hence the 4 crowns.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
When I purchased this I was skeptical about it's performance, After equipping it with Naza M flight computer some nice motors and FPV set-up. I was impressed. It flew wonderfully and stable. Then due to my error i dropped it out of the sky about 100ft. Hit the grass hard... To my surprise just the camera popped off NO DAMAGE to the frame or anything else. Put the camera back on and to this day it has over fifty flights and still flies great. I'm going to buy another soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good frame with a few desing flaws. I bought 2 frames, both had the light mode switch ripped off and missing parts. One of the post had no threads. I find the rubber absorber a little weak. You need to order nylon screws to hold the dirty frame and clean frame together so they do not seperate when you try to install the battery. The little post used as landing gear are very weak. you should replace them.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Besides some initial problems with the delivery of this item (like others, the button for the battery alarm had broken off in shipping) - it has so far been a decent and fun frame to fly. The arms seem pretty durable, and its fairly light weight. With no assembly instructions, I would say its a moderate-level build - but is very clean looking when finished thanks to the integrated PDB, mounting area for ESC's and ample room for electronics.

The vibration dampening balls that come with it are very soft, and will not hold much weight in the clean section before bottoming out. You will probably want to get blue 65g dampeners (http://www.hobbyking.com/hobbyking/store/__55649__Vibration_Damping_Ball_65g_Bag_of_8_US_Warehouse_.html). Even with those, this still isn't meant to hold much weight. I have a gimbal and controller mounted on the front of mine and still get some vibration from the clean section of the frame - luckily I mostly shoot photos, my video is usable but not amazing.

I paird this frame with 30A Simonk ESC's and NTM Prop Drive Series 2830-1100KV Motors, and it fly very smooth and nice.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just finished mine no problem with screws at all. Pictures in files section. Oh my switch for the LEDs was missing the button but the switch still works, you just need a cap screw to press inside the hole.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good frame with very thick and durable arms. Only minus is the cheap quality of screws. Be careful when tightening so you won't round them. Also, one spacer on the top or "clean" part of the frame didn't have threads on other end. Why there is no spare screws included?

I like the power distribution and the very bright LEDs very much too and the presoldered XT-60 is a nice little extra.

My setup has a Multistar 4S Li-Po, 2216-11 900KV Sunnysky motors and 10x4.7 props and seems to be flying smooth. Haven't tested with video gear yet, but I think it will be smooth too and there should be room for a FPV camera AND a GoPro or Mobius. :)

I recommend this frame for everyone who are looking for this sized quad frame for FPV or aerial video. Unbeatable in this price point! Just add some extra screws...

verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Dart 450 PCB FPV Quad

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.