New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

1200kv 3700watt Version Dr Mad Thrust 90mm EDF Inrunner 6-8s (40mm)

1200kv 3700watt Version Dr Mad Thrust 90mm EDF Inrunner 6-8s (40mm)

Discontinued Product

Please continue searching for a similar product.
SKU:
107000119
WANT FREE SHIPPING? Click here to find out more!

Présentation de notre Docteur Mad Thrust haute performance EDF série de moteurs. Notre docteur a été occupé à travailler derrière les scènes à venir avec cette série de MAD d'EDF moteurs ....... Puissance? - Ne manquent pas avec celles-ci!

Ceci est la version 1200kv 6-8s pour convenir 90mm unités EDF, avec un 3700watt énorme puissance de sortie de cette Inrunner 40mm est de ne pas être huma!

La gamme de poussée Dr Mad de inrunners EDF ont été construits avec une seule chose en tête - performance maximale EDF! Ils disposent d'enroulements du stator à haute température, des roulements de haute qualité, sont une précision équilibrée pour le bon fonctionnement et sont d'une conception 4 pôles.

Over-conçu pour gérer le stress et la fatigue de haute performance unités EDF et haute 'C' paquets notés. Le docteur a travaillé dur pour vous apporter une série de l'épreuve des balles, des moteurs EDF de performance extrêmes qui sont construits pour durer.

Obtenez un docteur Mad Thrust maison de puissance pour votre EDF!


Spécifications:
RPM / V: 1200kv
Tension: 6-8s
Courant max: 110A
Puissance: 3700 watts
Suggérée Rpm en fonctionnement.
Haut comte de lame: 33000 rpm
Low Count lame: 38000 rpm
Polonais: 4
Diamètre: 40mm
Avant montage Trou Distance: 25mm
Diamètre de l' arbre: 5mm
Longueur de l' arbre: 12mm
Fixation avant Taille du filetage: M3
Type de fiche: 4mm Bullet-Connector
Poids: 380g

  • UGS 107000119
  • Brand Dr Mad Thrust
  • Poids 460.0000
  • Longueur 140.00
  • Largeur 60.00
  • la taille 60.00
  • Kv ( rpm / v) 1200.00
  • Max Current (A) 110.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 30.00
  • (W ) 3700.00
  • Arbre A ( mm ) 5.00
  • Longueur B ( mm ) 74.00
  • Diamètre C ( mm ) 40.00
  • Longueur Can D ( mm ) 74.00
  • Longueur totale E ( mm ) 90.00
  • Dr Mad Thrust EDF Motors
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Yeah.. The doctor has been working very hard until he forgot all about Quality Assurance! Located at those set screws, on the other end, inner side of the motor can, you can see bad metal burrs protruding, left-overs from drilling and threading. Some are touching wires. Over time, these pieces will come off and will get into the spinning mechanism. That's where you will have serious problems! I have the same problem with PRODUCT ID: 107000118

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Yeah.. The doctor has been working very hard until he forgot all about Quality Assurance! Located at those set screws, on the other end, inner side of the motor can, you can see bad metal burrs protruding, left-overs from drilling and threading. Some are touching wires. Over time, these pieces will come off and will get into the spinning mechanism. That's where you will have serious problems! I have the same problem with PRODUCT ID: 107000118

salve, qualcuno sa se questo motore puo' montare elica propulsiva? e di che misura?? lo devo montare su f104 da 300cm, grazie

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

salve, qualcuno sa se questo motore puo' montare elica propulsiva? e di che misura?? lo devo montare su f104 da 300cm, grazie

i bought this motor for my composite bae hawk and Alloy DPS Series 90mm 12-Blade on 8s (turnigy nanotech 4500mah 35c)

Pulled 3100watt at 99 A.... quite impressive, i am really happy with this setup!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i bought this motor for my composite bae hawk and Alloy DPS Series 90mm 12-Blade on 8s (turnigy nanotech 4500mah 35c)

Pulled 3100watt at 99 A.... quite impressive, i am really happy with this setup!

If our planning on using these motors in a boat using a water jacket? find a water jacket that fits a 40mm motor! My Leopard water jackets are to small in diameter. so they may be hard to find! The tp power water jackets are ordered and I hope they fit. The motors are heavy in weight and with good reason they have a lot of windings and looks to be well made. just wish they were pushing my 42'' Kevlar Zonda!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

If our planning on using these motors in a boat using a water jacket? find a water jacket that fits a 40mm motor! My Leopard water jackets are to small in diameter. so they may be hard to find! The tp power water jackets are ordered and I hope they fit. The motors are heavy in weight and with good reason they have a lot of windings and looks to be well made. just wish they were pushing my 42'' Kevlar Zonda!

Toller Motor. Super Laufverhalten.berzeugende Leistung
Eingebaut im 90mm DPS 12-Blatt von HK. Bei 8S und 96A

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Toller Motor. Super Laufverhalten.berzeugende Leistung
Eingebaut im 90mm DPS 12-Blatt von HK. Bei 8S und 96A

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!