Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Dr Mad 1600kv 2400watt 90mm Version EDF Inrunner 6s Thrust (36mm)

Generating Links

Dr Mad 1600kv 2400watt 90mm Version EDF Inrunner 6s Thrust (36mm)

Prix:

Now save économisez 0,00 € 0,00 €

54,71 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
107000117
Livraison gratuite? Cliquez ici pour apprendre plus!

Présentation de notre Docteur Mad Thrust haute performance EDF série de moteurs. Notre docteur a été occupé à travailler derrière les scènes à venir avec cette série de MAD d'EDF moteurs ....... Puissance? - Ne manquent pas avec celles-ci!

Ceci est la version 1600kv 6s pour convenir 90mm unités EDF, avec un 2400watt énorme puissance de sortie de cette Inrunner 36mm est de ne pas être huma!

La gamme de poussée Dr Mad de inrunners EDF ont été construits avec une seule chose en tête - performance maximale EDF! Ils disposent d'enroulements du stator à haute température, des roulements de haute qualité, sont une précision équilibrée pour le bon fonctionnement et sont d'une conception 4 pôles.

Over-conçu pour gérer le stress et la fatigue de haute performance unités EDF et haute 'C' paquets notés. Le docteur a travaillé dur pour vous apporter une série de l'épreuve des balles, des moteurs EDF de performance extrêmes qui sont construits pour durer.

Obtenez un docteur Mad Thrust maison de puissance pour votre EDF!


Spécifications:
RPM / V: 1600kv
Tension: 2-6s
Courant max: 100A
Puissance: 2400 watts
Suggérée Rpm en fonctionnement.
Haut comte de lame: 32000 rpm
Low Count lame: 37000 rpm
Polonais: 4
Diamètre: 36mm
Avant montage Trou Distance: 25mm
Diamètre de l' arbre: 5mm
Longueur de l' arbre: 13mm
Fixation avant Taille du filetage: M3
Type de fiche: 4mm Bullet-Connector
Poids: 317g

  • Kv ( rpm / v) 1600.00
  • Max Current (A) 100.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 22.00
  • (W ) 2400.00
  • Arbre A ( mm ) 5.00
  • Longueur B ( mm ) 74.00
  • Can Diamètre C ( mm ) 36.00
  • Longueur Can D ( mm ) 74.00
  • Longueur totale E ( mm ) 90.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Dr Mad Thrust EDF Motors
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

elektriker | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 08, 2016

Bin von dem Motor begeistert.
Super Leistung und Wirkungsgrad, wird kaum warm.
Dreht einen 12-Blatt Rotor, den Dr Mad Thrust 90mm 12 blade fan.
Der Sound ist toll, leises Rauschen, fast schon zu leise.
Erst bei Vollgas hört man was.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 31, 2015

Great motor. I've got mine in the Taft fan in my HK Cobra (you'll need a 100A ESC) and it puts out 2200W.

Mark | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 31, 2015

Mind blowing performance for your $$$

I bought 2 of these for my 6S cat and added cooling jackets. Performance is stunning . This is the 2nd race boat that I have fitted Dr Mad Thrust and they perform at the pointy end always. Thanks H/K

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 01, 2015

i got this for a 2mtr glider running it on 3s 2600mah 60c discharge battery a 100a delux esc and a 14x8 folding prop and only pulling 44amps loads of power and stays nice and cool happy days

Natali | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 02, 2014

As an update to my previous review above. I installed the exact motor above that wasn't up to 8s and an EVO fan in a Taft 11 blade fan and ran it on 6s and it did amazing. LOTS of power and smooth running. Motor is staying cool and was a pretty easy fit. (just a little trimming on the shroud for it to fit)

elektriker | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 07, 2014

Sehr zufrieden.
Funktioniert sehr gut mit original FlyFly-EDF @ 6S ca. 65A.
Hat auch kein Problem mit dem DPS Series 90mm 12 Blade EDF-Rotor bei 6S und ca. 85A.

Very satisfied.
Works very well with original FlyFly-EDF @ 6S approximately 65A.
Also has no problem with the DPS Series 90mm EDF-12 blade rotor at 6S and about 85A.

Howdeedoodee | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 07, 2014

I put this in a carbon fibre jet see here http://translate.google.co.uk/translate?hl=en&sl=ru&u=http://ascomsk.narod.ru/fx-27.htm&prev=/searchpcnt3Fqpcnt3Dascpcnt2Bfx27pcnt26rlspcnt3Dcom.microsoft:en-GB:MIE-Address
I ran it on ASPEC 2200mah 6s battery on a 7 x 7 prop and it screams through the air with that speed of sound and is as fast as my stratair viper https://www.youtube.com/watch?v=WD2yT-aEzMY

siskojuice | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 06, 2014

its a Dr mad thrust good thrust with 6s batt

Tonino | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 19, 2014

Sorry to say that in my case these motors do not live up to their expectation. Totally different kV between 2 of the same motors (25pcnt). One pulling 105 amp (but choking the ESC) producing a lousy 1.45 kg thrust. The other using 122 amps (getting hot) and producing a lousy 2 kg of thrust with 90mm CSF. Had to cut open my brand new plane to get these out and replace them for 2x HetRC producing 2x 3.5 kg thrust. Still debating with HK on waranty.

g00seman | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 15, 2014

I bought one of these and installed it in a Changesun 12 blade 90mm fan.
I used a red brick 125 amp esc and 6s1p zippy compact 35c 4500 battery pack.
This motor is awesome, the fan runs so smooth and i didnt have to balance anything.
I use this in the FLYFLY hobby topgun L-39 also from HKing.
This model took off in 50 feet and hand launches as well so easily it flies out your hand.
I will deff be purchasing more of these motors in future, on 6s and a 12 blader they a great combo for 2500 watts.

Grant

  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!