S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Red Dragon 1228mm Pylône Racer en fibre de verre (PNF)

Red Dragon 1228mm Pylône Racer en fibre de verre (PNF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
1585 g
SKU:
B020-PNF

Combinez

et économisez plus
battery
acc
Description
du

Le HobbyKing Red Dragon Racer offre des sensations fortes à grande vitesse pour l'argent à faible vitesse et étonnamment pour une machine à grande vitesse de performance composite, il est Plug N Fly donc tout le travail est fait.

La cellule est composée d'un fuselage en fibre de verre et de l'aile, ce qui est un élément de 1pc amovible, seul le stabilisateur horizontal / ascenseur sont balsa. La finition est tout à fait exceptionnel dans un durable rouge brillant profond, il n'y a pas de doute, il semble rapide, ce qui est tout aussi bien, il est rapide! Un modèle de cette besoins rapides pour être bien construit et pas de coins ont été coupés, tiges Aileron poussoirs sont bille liés et servo à couple élevé de 9g de ont été pré-installé partout, tout le matériel fourni est de qualité robuste et bon pour la fiabilité et la performance.

Le moteur brushless Inrunner pré-équipée a beaucoup de puissance et couplé avec un tel cadre d'air glissant, d'énormes sourires vont être à l'ordre du jour à votre domaine. Le pilier et une pièce de rechange sont inclus dans l'alliage est spinner de la qualité, de sorte que votre radio, un LiPoly et un couple d'heures de travail au maximum sont tout ce qui se dresse entre vous et une action à grande vitesse. Le HobbyKing Red Dragon offre une combinaison imbattable de bas prix, la qualité, la beauté, la commodité, la facilité de montage, la durabilité et bien sûr la performance impressionnante, il est un must pour les amateurs de vitesse!

Spécifications:
Envergure: 1228mm
Longueur: 737mm
Wing Zone: 16.2dm2
Airfoil: MH43 modification
Voler Poids: 650g ~ 700g
Moteur: 28mm Inrunner Brushless 2600kv
ESC: 30A w / BEC
Servo: 9g x 3

Comprend:
Instructions
Autocollants
alliage Spinner
4.75x4.75 Prop x 2

A besoin:
Your Own 4 Ch TX / RX
Batterie 1000mAh ~ 1300mAh 3s Lipoly

Product
Specifications

Informations supplémentaires

  • Référence:
    B020-PNF
  • Brand:
    Non communiqué
  • Capacité ( mAh )
    Non
  • Poids (g)
    1585.00
  • Longueur:
    1260.00
  • Largeur:
    100.00
  • Taille
    175.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Verarbeitung na ja!? Ich vermute, dass der Kleber beim aushrten brchig wird. Das fallt mir jetzt bei mehreren Fiberglasmodellen von Hobbyking auf. Sobald diese einen kleinen Schlag bekommen, platzt das Modell in Form von kleinen Rissen auf, der Lack platzt ab. Die Abdeckung fr den Akku-Schacht ist nicht durchdacht. Das Flugbild an sich war gut.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
When I put the plane together I noticed that the fuse was twisted. The plane seems to be affected by this in flight. Stil waiting for a new fuse that they would send me.

Finish (paintjob) is fine and I get around 3 min of flight time on a nanotech 1000 mAh 3s if I am taking it easy with the trottle.

Speed is more or less 140 km/h on straight level. (radargun)

Friend of mine got it at the same time also with the twisted fuse and therefor low rating on quality.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ma premire impression est bonne sur la qualit des lments mais hlas cela nest quune illusion, les vis de fixation de laile ne sont pas centr ce qui fait que laile est dcal par rapport au fuselage et de plus ne jointe pas correctement sur le fuselage, les servos des ailes sont trop pais ce qui fait que les caches sont inutilisable et enfin la prise pour la batterie de propulsion est inadapt plutt choisir des PK pour gagner de la place.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ma premire impression est bonne sur la qualit des lments mais hlas cela nest quune illusion, les vis de fixation de laile ne sont pas centr ce qui fait que laile est dcal par rapport au fuselage et de plus ne jointe pas correctement sur le fuselage, les servos des ailes sont trop pais ce qui fait que les caches sont inutilisable et enfin la prise pour la batterie de propulsion est inadapt plutt choisir des PK pour gagner de la place.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered this plane. After waiting long time (30 days), I saw on my account it was written as not claimed. Never I got a notice it arrived in my country, even on the order in my account there was no information the plane arrived at least at a post office in Hong Kong. Of course, Hobbyking did NOT inform me of the "returned" plane. And the tracking number NEVER showed any results neither on Hong Kong Track and Trace nor Swiss Track and Trace. Well, if I don't ship an airplane and afterwards I don't refund postage, it's a not too bad business as well. Loss: about 50 US$
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received this and was shocked at the quality i dont know quite where to start! from the front the motor is prefitted esc pre soldered cool but i did manage to squeeze a himodel 1300mah 3s lipo in however it was a squeeze but everything fits. The battery esc cover did not have the rod going through as described so it will have tape to keep it on :/ Next the whole plane had a big warp and mis aligned the wing with the tail absolutely rubbish the elevator was far to femer which snapped when i was hinging! The paint is pretty bad too it is cheap and flakes off in patches and scratched far too easy. onto the wing the servo hatches dont fit correctly actually catch on the servo. Elevator control rod had been pushed inside the fuz which was a huge pain to get out the snake should have been all the way through or at lest through a couple more stays inside the fus not just glued to the inside as it was lucky i noticed it was loose or you would have no elevator control. to sum up if you still buy one CHECK EVERYTHING this is not plug and play it requires a lot of work
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
yeah un racer en fibre avec de bonne performances avec des lipos 3S seulement.. beau rapide et precis mieux qu'un rasoir gilette :D
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
At first when I opened the package I was impressed by the very nice and sturdy high gloss pained fiberglass body and wings. But then I started to look closer. First of the wing does not fit the main body. Screw holes in the wing are misaligned with the body and the curvature in the body mount is wrong for the wing. One of the wing servos was also not properly glued and came off when I inspected it. I was also a bit surprised that the rear wing was not installed and has to be epoxied (manual says to use CA, but good luck with that...). After all this is marketed as a PNF pylon. Lastly the recommendation says 1000-1300mah 3S but does not mention any dimensions. I can tell you right now that there is no way a 1300mah will fit. There is about 25x25x80mm of room for the battery with the ESC tucked under it. You will also need a mini receiver to be able to fit it behind the elevator servo. So to sum it all up.This PNF pylon is going to be A LOT of work.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A very nice plane. Built it was quite fast. Though the "horns" did not conceive me the in the way they seem to have been planned to fix: they did not seem to fix very well. However, I managed to make them work stable. The plane looks great, but the wing was not automatically in a right angle to the fuselage. I had to put some tape on one side of the fuselage to gain 2mm which helped to be in a right angle. Finally, the plane looked awesome. I only had a Zippy 11.1V 800mAh 20C at home. This is not really to recommend. The plane did not achieve a good speed. Twice I had to do an emergency landing after about 100 meters of flight. But I imagine, with the recommended 11.1V 1000mAh 30C batteries everything should run better. However, it's a nice plane - though I do not expect it to be rocket-fast, no matter which battery you use.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ordered 4 days ago, received this morning with a nice final surprise gift of custom tax for 40 !

The plane is very nice, good quality. The red color is perfect , glossy.
It is very very small.. I would say it is a bit overpriced at 150 usd ( 40 usd EMS ( 60 usd french tax )))

I ordered it because I had already several 1300 3S, but none of them will fit, fuselage is too tight.

Assembly is just few minutes. I just need to find the correct lipo to fit in !!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
battery
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.