Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Durafly ™ JU-87G Stuka w / volets et lumières 1100mm (PNF)

Generating Links

Durafly ™ JU-87G Stuka w / volets et lumières 1100mm (PNF)

Prix:

Now save économisez 0,00 € 0,00 €

201,55 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9142000088
Livraison gratuite? Cliquez ici pour apprendre plus!

Durafly® ™ une nouvelle fois fixé la norme avec cette haute qualité JU-87G Stuka qui a suffisamment de détails à l'échelle et les caractéristiques de garder tous les amateurs de warbird heureux. La gamme 1100mm offre le pilote RC un modèle de taille pratique qui peut être facilement transporté et utilise le pack toujours populaire 2200mAh 3s Lipoly, mais en même temps, le modèle est assez grand pour avoir une présence et est capable de lutter contre la plupart des terrains d'aviation, de ne pas parler d'un peu de vent, ce qui rend très pratique.

Ainsi que la recherche fantastique, ce Stuka est plug and fly, ce qui signifie très peu de travail de montage est nécessaire. Le moteur outrunner puissant, ESC, lumières et servos sont navigation tous les pré-installé, vous laissant à coller sur les Tailfeathers et une échelle détaillant, le boulon sur la fiche dans les ailes et aller voler!

Nous avons volé ce superbe Stuka abondamment pendant les essais et il ne sera pas déçu, il y a beaucoup de puissance pour les manoeuvres de warbird vraiment échelle et la cellule est viceless sans l'ombre d'un étal de pointe. Les servos pré-installés volets ont une belle opération lente pour aider à prévenir la montgolfière et les volets eux-mêmes permettent la vitesse d'approche de descendre à une exploration sans un soupçon de wingrock. Il ne fait aucun doute, ceci est un fantastique warbird regarder et il vole aussi facilement en tant que formateur aile basse!

Caractéristiques:
• Ultra détail à l'échelle
• Haute Qualité Construction & Finition
• Plug & Fly, simplement ajouter RX et Lipoly (non inclus) et voler!
• 37mm en option Cannon Pod de, faites simplement glisser sur
• Châssis robuste qui peut gérer presque toutes les bandes
• Robuste Construction EPO Foam
• Flaps équipé en standard avec lenteur servos de fonctionnement pour le réalisme et pour empêcher la montgolfière
Feux de navigation • Pré-installés
• Facile et rapide Construction

Spécifications:
Envergure: 1100mm
Longueur: 820mm
Voler Poids: 1000g
Moteur: 3536 850kv Brushless Outrunner Motor
ESC: 35A w / BEC
Wing Zone: 18.6dm2
Wing Chargement: 53.8g / dm2

Comprend:
manuel de photo plein
Tout le matériel
Y-Leads, tournevis

A besoin:
Your Own 5 canaux TX / RX
Batterie 2200mAh 3s Lipoly
colle de mousse de sécurité

Pièces de rechange disponibles ICI!

  • Durafly™ JU-87G Stuka w/flaps & lights 1100mm
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

philippe | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 10, 2015

Trs bon avion, rien modifier, juste quelques collages parfaire. Vol vraiment tendu, dcollage super simple: il se lve trs bien pour un long roulage la drive. L' atterrissage ce fait en douceur sans volets (ils ne servent qu'a faire plus vrai, c'est tout). Avion trs silencieux, gnial!!! A recommander aux pilotes confirms qui veulent un Warbird avec une gueule diffrente. Juste petit bmol... il est blanc et gris donc il ne se voit pas bien dans un ciel laiteux.... normal c'est sa tenue de camouflage... Accu 3s, 2200 ma/h, mettre au fond dans la cage, ainsi il est lgrement piqueur: Parfait pour moi. Que du bonheur.. Je possde aussi le corsair de Durafly, qui est trs bon, mais je prfre ce Stuka.....

vadim | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 29, 2015

I got your Ju87 ago. But the fly had yesterday. Plane class - I met all my expectations. Sustainable flight to the landing comes perfectly. Durafly keep it up. When released into production Ju88?

Widowmaker | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 25, 2015

My first Durafly model, and I am a little disappointed. The plane came with one of the ailerons bent, even tho the package was not dented in the area. The nice white parts of the plane have yellow over spray on it. Maybe I am being to picky.

Rob666 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 16, 2015

This is my fourth Durafly model, up until this point I have been very pleased with the products. In the case of the Stuka, the quality has gone way down hill. The unit is not white, the top of the main wing and the fuselage are a dirty yellow color, while other parts are white. A total mismatch.
I am VERY disappointed in the appearance.

Tamas | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2014

I'm currently in the assembly process.

Right after opening I see the static flaps are fallen off. No problem I can fix it with some glue.

First step in assembly to glue the elevators to the tail. During this I noticed the whole fusalage and tail are slightly twisted. I tried to make it straight but no succes. Hopefully triming will be enough to balance it.

Then next step would be to mount the landing gear on the wings.
This supposed to be mounted with 4 screws. Problem is you can not screw in the screws vertically beause there is no room for your hand and screw driver from the landing gear. But the main problem is that the screw holes do not have screw threads and the material is so hard that it is not possible to screw in the srews.

I stopped building the plane here.
I might have to just glue the landing gears on, which means less strenght.

Richard | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 08, 2014

Finally got around to flying the Stuka today. I have had it built for several months, and was kind of intimidated by it. It just looked like it would be difficult to fly. Anyway, I shouldn't have waited. It required very little trimming, a bit of up elevator, and a couple of clicks of right rudder, and she was flying fantastic! Actually very stable in the air. It will do rolls, but they are slow and require some down elevator while inverted to keep from loosing altitude. Loops are big and open. I actually switched from low rates to high on this one to get a bit more response. It handled a light wind with no issues, and had no problems taking off from a grass field. It does have a tendency to flip on landings in grass though. I thought I had it down since it was rolling along nicely after touching down, but hit some thicker grass and flipped. No damage, except for the antenna on top of the canopy. I flew it twice, the second time with all the trims set, it was a joy to fly, and really looks good in the air. The flaps work well for slowing the plane down, and mine didn't pitch up when I deployed them initially at altitude to see how the plane would respond. Overall, I give this one 5 stars. Durafly has a winner with this one, and again, those low passes really look great with this plane!

Sebastian | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2014

Great plane for the money. Minor defect in mine? Tail was off by a small angle, did not really affect flight too much. Loves to torque roll so watch out.

Martin | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 10, 2014

Ich bin berrascht wie gut das Teil eigentlich fliegt. Nach dem ich es ausgepackt hatte hatte ich so meine Zweifel. Aber mit ca 50g Blei vor dem Heckspron fliegt die Stuka. Es gibt so wenig Sterne wegen den Anlenkungen. Die mssen selber angebracht werden. Wenn man die Teile sieht und probiert die Ruderhrner anzubringen weis man auch warum. Das ist eine Fummelei und es passt nichts. Ich empfehle die Schrauben in die Ruderhrner einzudrehen und dann das Horn mit 5 min Epoxy anleimen. Der Schwerpunkt ist ok so wie angegeben, aber eben es braucht Blei am Ende. Das ist fr mich ein so nicht ok. Wer denkt er bekommt das hin ohne die MGs der irrt. die haben keinen Einfluss auf den SP nur aufs Gewicht. Aber alles in allem ist die Schaumwaffel so ok.

Wayne | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 27, 2013

Really happy with this plane. It was the first durafly model I bought, and through inexperience, it took me some time (months) to complete the build. Started the build a couple months ago, left it aside for a long time, and only completed the build last week. I was a bit woried about flying it. Looking at that wing, i was worried it wouldn't come off the ground without a long run-up, and I don't fly off a long runway :). All for nothing. The plane just about leaps into the air, and flies very well, if not awefully aerobatic. Flies a lot faster than I thought it would, and absolutely looks the part in fast fly-bys and dives. All in all - really pleased with it. Now all I got to do is find me some "Jericho trumpets" to attach to the wings :)

GaraKan | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 14, 2013

Love love love this plane! It flew nice and smooth, very little trim needed. It can do loops, rolls, etc. My maiden ended with a minor crash due to my hindsight with the elevator. It's tiny, so you need to up the throws for the ele. Mine couldn't yank up hard enough as I was so used to... such... hard yankings. But other than that, it held up well, no breakages, tough, tough, cg is dead on, love the design, love the feel of the flight, very highly recommended!

  1. 1
  2. 2
  3. 3
  4. 4
Fichiers clients
manual Download [5955]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!