La série DYS BX de moteurs sont un équilibre entre la qualité, la performance et le prix. Tous les moteurs BX sont livrés avec une seule pièce intégrée carter moteur CNC et arbre d'hélice qui pour un léger, solide et un design compact. Les moteurs BX sont emballés comme un ensemble de 2 moteurs, une rotation CW et une rotation anti-horaire avec écrous correspondants prop. Sont également inclus avec le jeu est connecteurs de balles 2mm et le matériel de montage correspondant. Le moteur de multirotor 1306-3100kv est idéal pour les petites 180 ~ 220mm multirotors et 4 ~ 5 accessoires pouces.
RPM / V: 3100kv
Dimensions: 18 × 15mm
Arbre: arbre principal 2mm et de l' arbre d'hélice 5mm
Tension: 2S ~ 3S (7.4v à 11.1v)
ESC: 6 Ampères à 10 Ampères
Trous de montage du moteur: M2 x 12mm
2 moteurs 1 CW / CCW 1
2 écrous prop
conectors Bullet 2mm
Le matériel de montage
Kv ( rpm / v)
Max Currents (A)
Longueur B ( mm ):
Longueur Can D ( mm )
Max Tension (V)
Arbre A ( mm ):
Unit Weight (g):
Diamètre C ( mm )
Longueur totale E ( mm )
Résistance ( mh ):
compact and hight power for 180 sizeDecent fairly cheap motors for use with smaller quadcopters. Using on 130mm frame currently.worked fine for me. the the threads on the shaft designate direction of rotation so mount them accordingly.Used these on a 180mm quad at 3S with AfroESC 12A ultra light /w BEC. Used 4x4.5 Bullnose and GemFan 4045 ABS. I suppose I lucked out, no issues so far after 10-15 batteries. After a longer session, one motor becomes slightly warm but thats it. The CW/CCW threading is slightly confusing at first, but fine thereafter, and Ive used a Sharpie permanent marker to indicate the direction on the CW (grey) nuts to help. I use a 10mm socket to assist in removing the prop nuts / spinners when theyve tightened themselves too much after a prop break. The leads were easy to tin and solder. The included M2x6mm screws worked with my Diatone ET 180, although I filled them down slightly shorter for peace of mind as they we too close to the motor stator windows (you can see them just under the bell looking at the side profile). Remember to use a thread-locker, as the screws can loosen themselves quickly. Ive purchases backup motors, but have not as yet need them. They do seem slightly unbalanced, and certainly dont sound smooth, but for the novel size and nominal price are fine for my needs.actually this motors is a trash.very bad bearings.very unbalanced.don't waste your money on this trashThey have a really nice power but from the 4 motors I bought one gets extreamly hot on my quadrocopter while the others stay cool. Looks like it is defect.very bad mor , got 4 sets of this and 4 comes out defective. motos are not balanced and making some grinding noise.I was really hoping these would be good, sadly my experience has been poor with them.
The first set of 4 I purchased for a 155 frame. One of the motors did not spin true out of the box, it caused some vibration but I didn't want to spend the time to RMA so I used it anyway. This same motor would often not want to start but would spin up after a few tries. Less than one month later I had a fairly tame crash in grass and ended up bending the inner shaft and and prop shaft, very surprised that a impact with grass would do so much damage.
I ordered 2 replacement motors and had another crash the same day as I installed them, resulting in another bent shaft. Even after straightening the shaft the motor no longer runs as I believe the magnets have shifted.
Overall you get what you pay for, and the durability of these has left me looking for something else.I bought six of these motors. One went up in smoke during takeoff on the first flight. The motor actually did spin up normally, then it stopped suddenly and sparks came out of the case. Now the windings are totally fried and another $10 are wasted!
I'm absolutely certain there was nothing wrong with my setup. I used the suggested multistar 10a esc v2, a 3s lipo and 4 inch props.I have these on a HK Thorax Mini Hex. It is rippingly fast and gives 10-12 min on a 2200 Zippy Compact. They are small and fragile...