New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

DYS 320 Full Carbon Fiber Quadcopter pliant avec étui de rangement (PNF)

DYS 320 Full Carbon Fiber Quadcopter pliant avec étui de rangement (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9206000033-0
WANT FREE SHIPPING? Click here to find out more!

Avez-vous des pneus à l'idée de la construction de votre 320 quad prochaine? Voulez-vous pour un cadre de taille PNF 320 avec toutes les fonctionnalités d'un multirotor bricolage et plus? Le DYS 320 PNF multirotor répondra à un grand OUI à toutes ces questions!

Le DYS 320 PNF quadcopter a toutes les fonctionnalités et la flexibilité d'un cadre de bricolage et de la facilité d'utilisation d'un PNF.

La dernière offre de DYS intègre la qualité BE moteurs série brushless, entièrement sous licence carte pilote ouverte de contrôle de vol CC3D (pré-écoute), humidifié plaque d'isolement de la caméra, les contrôleurs de vitesse BLheli et un design de cadre pliant qui se replie facilement dans l'étui de transport fourni.

Le contrôleur CC3D Flight offre une sensation quand on vole tricopters, quads, hexcopters, octocopters, et les avions des ailes, même fixes et a été spécialement choisi pour cette quadcopter PNF pour vous apporter une plate-forme super stable tout droit sorti de la boîte.

Le logiciel de contrôle au sol (GCS) fournit un moyen facile de programmer la carte via une connexion USB. Chaque carte a été pré-flashé et mis au point avec le dernier firmware afin de configurer votre quadcopter ne prendra pas de temps.

Le DYS 320 PNF est fourni avec un ensemble complet d'accessoires, adaptateurs prop et tous les appareils et accessoires.

Caractéristiques:
• format PNF ajouter votre récepteur et que la fête commence
• contrôleurs 20A Opto BLHeli vitesse
• DYS puissant BE Les moteurs de la série de
• Système de commande de vol CC3D pré-réglé
• Ouvrir nuage pilote configuré et pré-écoute
• châssis portable pliant (Full Carbon Fiber)
• étui de transport inclus Handy
• Construction extrêmement durable de pleine fibre de carbone
• Prise en charge des pièces complètes

Spécifications:
Empattement: 320mm
Motors: DYS BE1806 2300kv (pré-installé)
ESC: 20A opto BLHeli (pré-installé)
Props: 6x3 (pré-installé)
FC: CC3D (pré-installé)
Poids: 345g

Obligatoire:
5 ~ radio commande 6ch
1300 ~ 2200 3s batterie
engrenage FPV option

  • UGS 9206000033-0
  • Brand DYS
  • Capacité ( mAh ) -
  • Poids 1295.0000
  • Longueur 370.00
  • Packaging Width 140.00
  • la taille 350.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

quad is nice, but no manuals at all, and it is not ARF at all, connected CC3D board and libre Pilot, configred radio inputs, but no output to motor ESC,
spent all evening online to find out that you have to use vehicle setup wizard in order to
make it work,
so not so plug and play,
quad is nice and fly ok, but order lot of spare props if you are new with quads like
me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

quad is nice, but no manuals at all, and it is not ARF at all, connected CC3D board and libre Pilot, configred radio inputs, but no output to motor ESC,
spent all evening online to find out that you have to use vehicle setup wizard in order to
make it work,
so not so plug and play,
quad is nice and fly ok, but order lot of spare props if you are new with quads like
me.

this was my first racing quadcopter and it was the most fun i have had in a long time. it is so easy to setup and flys like a dream. I have only used it with point of view. but from what i can guess it works great with fpv.
with the many crashes i had being a first timer it stayed together very well, because it has folding booms it absorbs the impact of the fall and of course i have broken 20 props in the first 3 days of flying but that's me :D
works best with a 2200mah battery i could get 15 minutes with this with out compromising on power.
the only big complate it the landing legs, they made them out of carbon fibre along with the rest of the quad which was a STUPID idea, because carbon fibre is stiff as hell and i was scared to death to put them on let alone taking them of to get it in to the case.


pros
great value
good for beginners
tough and sturdy
easy to setup
easy to work with

cons
hard to reach usb port
stupid landing legs

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this was my first racing quadcopter and it was the most fun i have had in a long time. it is so easy to setup and flys like a dream. I have only used it with point of view. but from what i can guess it works great with fpv.
with the many crashes i had being a first timer it stayed together very well, because it has folding booms it absorbs the impact of the fall and of course i have broken 20 props in the first 3 days of flying but that's me :D
works best with a 2200mah battery i could get 15 minutes with this with out compromising on power.
the only big complate it the landing legs, they made them out of carbon fibre along with the rest of the quad which was a STUPID idea, because carbon fibre is stiff as hell and i was scared to death to put them on let alone taking them of to get it in to the case.


pros
great value
good for beginners
tough and sturdy
easy to setup
easy to work with

cons
hard to reach usb port
stupid landing legs

To order other items correctly, detail information is necessary.
Connector size for battery should be mentioned.
And a little bit detail assemble manual should be necessary.
Due to too stiff landing feet, now I cannot assemle them to carbon frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

To order other items correctly, detail information is necessary.
Connector size for battery should be mentioned.
And a little bit detail assemble manual should be necessary.
Due to too stiff landing feet, now I cannot assemle them to carbon frame.

I was really looking forward to this quadcopter when I've placed an order in January 2016. The delivery was quick and I was setting it up in open pilot in no time. HOWEVER, after going through all of the setting I found that one of the motors was twitchy. After back and forth emailing following online chat sessions HK sent me a replacement motor. The motor took over a week to get and it was a different colour (ok - not a big issue). HOWEVER the new motor didn't fix the problem! after soldering the new motor to the ESC, it still had the same issue!!! Finally, after spending about 2 hours with the HK online service chat, I've sent the quadcopter back to the warehouse (AT MY OWN EXPENSE!!) for replacement. Finally at the beginning of April (yes - APRIL!!!) I received the quadcopter that took off for 2-3min until it crashed. The FC lost power for some reason (while everything else had the power supply). After removing and connecting cc3d board via the usb I've noticed a hot spot and identified BAD SOLDERING that was shorting the board. Managed to remove the fault with the solder iron and now the quad is flying again. So what can I say - I don't think anyone should go though the same experience... the expectation is that the product that you pay for just works!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I was really looking forward to this quadcopter when I've placed an order in January 2016. The delivery was quick and I was setting it up in open pilot in no time. HOWEVER, after going through all of the setting I found that one of the motors was twitchy. After back and forth emailing following online chat sessions HK sent me a replacement motor. The motor took over a week to get and it was a different colour (ok - not a big issue). HOWEVER the new motor didn't fix the problem! after soldering the new motor to the ESC, it still had the same issue!!! Finally, after spending about 2 hours with the HK online service chat, I've sent the quadcopter back to the warehouse (AT MY OWN EXPENSE!!) for replacement. Finally at the beginning of April (yes - APRIL!!!) I received the quadcopter that took off for 2-3min until it crashed. The FC lost power for some reason (while everything else had the power supply). After removing and connecting cc3d board via the usb I've noticed a hot spot and identified BAD SOLDERING that was shorting the board. Managed to remove the fault with the solder iron and now the quad is flying again. So what can I say - I don't think anyone should go though the same experience... the expectation is that the product that you pay for just works!

Fit to my 3D cameras which I put in front of the frame. It look like an ant when I put VTXs with 2 antennas on top. Nice frame with case, so I can easily bring it anywhere without worry.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fit to my 3D cameras which I put in front of the frame. It look like an ant when I put VTXs with 2 antennas on top. Nice frame with case, so I can easily bring it anywhere without worry.

Great little quadcopter for someone who doesnt want to build or worry about that part. Downside, when the ESCs go almost impossible to change out. The replacements that HK has are NOT a direct replacement, as you need to ask them about the new pin layout. Great price when the drop it to 50pcnt off sale price, but get it while its on sale, the sale typically ends pretty quick. The feet are extremely hard to snap on in the beginning, and annoying that you need to take them off each time to fit back into the case they designed for it (you would think they would make it fit).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little quadcopter for someone who doesnt want to build or worry about that part. Downside, when the ESCs go almost impossible to change out. The replacements that HK has are NOT a direct replacement, as you need to ask them about the new pin layout. Great price when the drop it to 50pcnt off sale price, but get it while its on sale, the sale typically ends pretty quick. The feet are extremely hard to snap on in the beginning, and annoying that you need to take them off each time to fit back into the case they designed for it (you would think they would make it fit).

I have had this product for about 3 months it is my second quad this thing is great i have had some hard crashes with it and it still keeps flying great
pros
out of the box easy set up and fly
loads of features
props are larger than stated
cons
needs additional struts/posts
has a week spot on bottom plate by esc slight cracking if crashed hard

i would recommend it to my friends

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have had this product for about 3 months it is my second quad this thing is great i have had some hard crashes with it and it still keeps flying great
pros
out of the box easy set up and fly
loads of features
props are larger than stated
cons
needs additional struts/posts
has a week spot on bottom plate by esc slight cracking if crashed hard

i would recommend it to my friends

good little quad just the esc are part of the frame so have fun replacing them when time comes

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good little quad just the esc are part of the frame so have fun replacing them when time comes

Customer files
dys 320 Download [1436]
3d printable Head for props... in case you lost them Download [705]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save