New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Easy 3D Balsa Glow / EP 1280mm (ARF)

Easy 3D Balsa Glow / EP 1280mm (ARF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
437000007
WANT FREE SHIPPING? Click here to find out more!

Le Easy 3D est un grand club de taille modèle de voltige du style traditionnel qui est conçu pour être très amusant, ainsi que pas cher et facile à construire.

Le Easy 3D est léger, mais conçu pour gérer un peu d'abus! Par exemple, l'alliage sous-chariot est unique en caoutchouc monté, la roulette de queue orientable utilise un gouvernail et fuselage importante monture, les trois roues utilisent des pneus en caoutchouc appropriés, les cornes de contrôle sont le type de poids lourds et le capot est d'une construction de GF dur . Sont également inclus avec le Easy 3D est monte à la fois pour éclat et EP, réservoir de carburant, monter et spinner moteur, ce qui en fait une grande valeur pour l'argent!

Ce grand performant "club" modèle de voltige est également pas cher à construire, servo standard de aura plus de place à l'emploi pour tous, mais les pilotes les 3D les plus hardcore et il n'y a aucun doute la capacité de ce modèle un bon prix, il est brillante performance à faible vitesse combiné avec il est facile de voler la nature font l'Easy 3D un grand modèle 3D premier ou sur les taux bas, un modèle de voltige grand plaisir!

Caractéristiques:
• Construction légère Balsa / Ply
• Couleurs vives et traditionnelles See Through Covering, Great pour l'orientation
• Construire rapide et facile
• Caoutchouc monté U / C
• Matériel complet inclus
• Grande Première 3D Avion
• Supports pour Soit Glow ou EP
• Résistante pneus en caoutchouc All Round
• Plug In Wings for Transport facile
• Grand, rapide Canopy sortie

Spécifications:
Envergure: 1280mm
Wing Zone: 45dm2
Longueur: 1190mm
Poids: 1900g ~ 1950g

A besoin:
Votre propre 6 canaux TX / RX
0,46 Glow Moteur / 42mm Brushless Outrunner Motor autour 800w (3D)
5 x Servo standard (4 x pour la version EP)
60A ESC (EP Version)
RX Batterie (Lipo ou Nimh)
UBEC (pour EP ou Lipo RX Batterie)
4s Lipo 2700mAh ~ 3300mAh (EP Version)

  • UGS 437000007
  • Brand -
  • Capacité ( mAh ) -
  • Poids 3910.0000
  • Longueur 940.00
  • Packaging Width 210.00
  • la taille 430.00
  • Easy 3D Balsa Glow/EP
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a very will made plane putting this together took no time at all. I have put a OS40 glow using a 11x4 prop plenty of thrust good for prop hanging and 15pcnt nitro. Total weight of around 1.8 kg. If they restock may buy a second.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very will made plane putting this together took no time at all. I have put a OS40 glow using a 11x4 prop plenty of thrust good for prop hanging and 15pcnt nitro. Total weight of around 1.8 kg. If they restock may buy a second.

the medium is set, the engine cowling is low in fiber quality and used without paint peels. About the price, shipping to Brazil is expensive which makes the product benefit with average cost. The Construction Builder wood / balsa looks good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the medium is set, the engine cowling is low in fiber quality and used without paint peels. About the price, shipping to Brazil is expensive which makes the product benefit with average cost. The Construction Builder wood / balsa looks good.

This is a very good value 3D plane. It is personally my first plane, and it was fairly straight forward to build. Very light weight, loads of power with a .46 nitro and a 10x7 prop. Elevator snapped on me under steep descent, but that was probably my fault for over-speed, managed to land with minimal damage which was very impressive as half went completely and the half with the control horn was barely in place. (Landed hard taking wheel mounts off and breaking engine mount, easily replaced/repaired. Need to build myself an elevator).

Everything inside the box is of good quality, very impressed with it for my first plane. Is touchy and took some getting used to first flight, so perhaps not best choice for first plane, but I managed so if you are keen to skip the trainer stage, not a bad choice.

Very good value as it was cheaper for my to ship from HongKong to Australia, than purchase anything locally.

NOTE: This plane does not come with engine mounts as stated in the description!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very good value 3D plane. It is personally my first plane, and it was fairly straight forward to build. Very light weight, loads of power with a .46 nitro and a 10x7 prop. Elevator snapped on me under steep descent, but that was probably my fault for over-speed, managed to land with minimal damage which was very impressive as half went completely and the half with the control horn was barely in place. (Landed hard taking wheel mounts off and breaking engine mount, easily replaced/repaired. Need to build myself an elevator).

Everything inside the box is of good quality, very impressed with it for my first plane. Is touchy and took some getting used to first flight, so perhaps not best choice for first plane, but I managed so if you are keen to skip the trainer stage, not a bad choice.

Very good value as it was cheaper for my to ship from HongKong to Australia, than purchase anything locally.

NOTE: This plane does not come with engine mounts as stated in the description!!!

Customer files
No File Name Download [2152]
No File Name Download [1903]
failed elevator Download [2646]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save