Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

EDF Ducted Fan Unit 7 Lame 3inch

Generating Links

EDF Ducted Fan Unit 7 Lame 3inch

Prix:

Now save économisez 0,00 € 0,00 €

19,49 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
OR003-00109-7B
Livraison gratuite? Cliquez ici pour apprendre plus!

EDF Ducted Fan Unit 7 Lame 3inch
Diamètre de lame: 3inch / 77mm
Diamètre extérieur du boîtier: 83mm
Epaisseur de paroi: 1.9mm
EDF Longueur: 86mm
Type de lame: 7
Taille de l' arbre: 3,175
Cette EDF prendra un moteur avec un diamètre maximal de 31mm

Fabriqué à partir de haute résistance en plastique renforcé.
Pièces hélices disponibles.

Moteur conseillé: 28-35 8 Turn (11.1 ~ 18.5v)
ESC: 35A
Rpm: 3,900kv
Puissance: 500 ~ 2000g Thrust


Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Mattias | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 06, 2013

Used this with the Turnigy 2836 3200kv motor and 3S.
The sound is really nice actually, more "jet" than "woosh". It didn't need balancing though the motor mount seems a little weak and probably need reinforcement.
About the motor-edf combination: It pulls about 65 amps and give about 6-700 g of thrust in bench, slightly lower mounted in my machine due to the smaller outlet. The motor tends to overheat, so a lower kv motor with 4S might be a good idea.
I said "used" because I crashed my plane at 150 km/h which made the probably very hot motor to push itself through the mounting holes (again, the motor mount is a bit fragile).
All and all, I really enjoyed this EDF, but I should have choosed a lower kv motor with 4S instead of 3S.

ARCDIRECT | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 04, 2013

I put value only two crowns , just because it comes with 3,17mm shaft .And the fact that the mini motor for this fan they all have 4mm shaft ,Which means you got buy extra shaft for cost of $5.99 .doesnt add up . Other wise great fan . PS i dont want to open the hole to 4mm not advise able .

Client | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 26, 2011

this fan,1500kv outrunner,6 cell,40a mystery speedy,tested gives 1050grams thrust at 24.5amps..550watts....850g thrust in my kyosho f16 with restricted ducting for high speed, No cheat holes.very fast.. plane weighs 900g

Charlesd | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 16, 2011

This EDF motor setup is solid.. I recommend getting this to upgrade all you Jets that require more thrust for your amps..

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 09, 2011

it is great edf very high quality and low price....

erh7771 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2010

To get most out of fan you most close down the shroud rotor gap using duct tape or balsa wood. The gap allows to much air to pass buy making too much turbulence and you must put some foam lip or something in the inlet especially at high kv speeds.

55oz of thrust on 3s\2200\40c\88amps, 4100kv cyclone motor

bongofly | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2010

This EDF is awesome! I put this baby on a Hobbico Diablo and replaced the stock 55mm EDF. I made a custom underbelly mounting and tube using a 2 Liter pop bottle,so the odd size of this fan didn't matter much.I used a 2845 HXT 2200 kv motor on 4s 40c 2200 mAh Turnigy.It gives good thrust with the aggressive blades.I'm trying a 55 batt,but not sure if the motor will get too hot.

HELIVERCA | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 04, 2010

comprei para o motor Wild Beast FED Outrunner 4880kv de 70 milmetros com variador 90 / 100 hobbyking ss

Von | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 02, 2010

Great fan unit super strong, it just doesn't fit any regular Jets, this brand and size fit well for 90mm and not an upgrade for 70mm too much foam removeal

The1CZ | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 23, 2009

Could be a bit more harder the plastic, when it reach critical rpm the blade touched inside walls(

  1. 1
  2. 2
  3. 3
  4. 4
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!