EDF55 w / ADH300 Brushless Outrunner.
Une bonne prise et aller système.
Tension d'essai: 11.1v
Testez actuel: 18A
Moteur: ADH300L 4300kv
Diamètre extérieur: 58mm
Résultats de test:
@ 10v | 17A | 430g | 170W |
@ 11v | 18A | 470g | 199.8W
* La couleur peut varier de la photo.
Overall good little EDF unit the motor is really good, fan is ok not great but fine for little foam jets thats all you needSo good! Make your work!Installed in sky angle fa18 50mm, 25-30amp jpower 64amx stock esc, 1000mah 3s nano 45-90c this is the result.
That's twice the watts from stock 50 edf and only 10 more amps with no extra weight, high alpha slow passes not a problem and talk about vertical.Bought two of these to upgrade my twin 55mm Mig-29. Using a 3s 2200 25c both of my fans yielded 260 watts each at 24amps on separate tests. Overall a pretty good fan and seems to produce a lot of thrust. Neither of the fans were balanced very well and its hard to try to balance them because of how small the hole is that holds the rotor to the adapter.Powerfull EDF on 3S. Very light but cheap quality. But for the money okay.WOW great edf mounted it in 50mm F-86 puts out around 520 grams of static trust(480 gr. with zippy 1000mah 3s).
Set up 1300 nano-tech 3s 45c, 30a hobbyking esc(8 bucks) and thrust tube same outletzise as the epo.
was very wel balanced little vibration halfthrottle but otherwise smoooth
Can't waith to fly itDecent power, but having difficulties getting these to run true. Keep having blade rub issues, despite using a lathe turned locator plate to ensure exact centre motor mounting. Seems the Motor locating /mounting method is unable to keep the motor from moving under power.
Frustrating to say the leastmuy buen producto, la instale con una bat de 2s 1000 nano y funciona de maravillas en mi F 4 D construido por mi, no tiene vibraciones y el empuje es mas que suficinte. Pronto comprare otra.I don't have problem with this unit, the engine works very well, the trust is consistent and the fan are balanced... five stars...needs balancing. fins scrapes on the housing. cheap. you get what you pay for. i would still recommend it