Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Edge 540 EP / 0,25 1200mm (ARF)

Generating Links

Edge 540 EP / 0,25 1200mm (ARF)

Prix:

Now save économisez 0,00 € 0,00 €

74,01 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
HZ-EDGE-540
Livraison gratuite? Cliquez ici pour apprendre plus!

Ce Edge 540 est superbement construit et couvert et capture les lignes du Edge 540 très bien. Il est très léger qui, couplé avec les généreuses surfaces mades de contrôle de la taille de ce bord un modèle 3D idéal, même avec moins jette est un dépliant sport idéal.

Ce bord est livré avec un moteur puissant de montage car il est conçu soit pour l'énergie électrique ou une lueur, pour EP, vous aurez besoin d'au moins un 400w mis en place et lueur, un moteur de 0,25 taille. Pour le vol 3D, vous devez utiliser un couple élevé sous numérique micro de (non inclus) servo, pour le vol de sport, 9g servo de ira bien. Ce superbe à la recherche des caractéristiques Edge prise dans les ailes sur un tube d'aile CF et un tailwheel orientables, ce qui rend pour une pratique aussi bien que de bonne qualité et beau modèle de voltige.

"0.25" modèles de classe balsa ont été populaires pendant des années et il est pas étonnant, ils sont assez petits pour être pratique et pas cher à construire, mais ils volent comme un modèle plus grand, si vous ne l'avez jamais essayé cette classe, ce superbe Edge 540 serait un excellent endroit pour commencer!

Spécifications:
Envergure: 1200mm
Longueur: 1040mm
Wing Zone: 28dm2
Voler Poids: 1450g

A besoin:
Votre propre 4 canaux TX / RX
4 x Digital High Torque Sub Micro Servo (3D) ou 4 x 9g Servo (+1 Servo pour Glow Puissance)
350w ~ 500w Brushless Outrunner ou 0,25 Glow Moteur
Réservoir de carburant et accessoires (Glow Puissance)
40A ~ 50A ESC w / BEC (EP)
50mm Spinner
2200mAh ~ 3300mAh 3s Lipoly Batterie (EP)

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

felixgza | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 10, 2012

Good plane but weak pack it arrived crushed and open (didn't notice until received) and the plane with some formers broken but reparable, the tube that goes inside the wings didn't arrive, I have to look for it in stores.

Mike | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 26, 2012

Received my edge about a week a go. Went together with no problems, covering was not the greatest lots of seams to re seal. Wheel pants are white not black, no glow mount just electric, haven't had it out for a fly yet still winter up here in Canada, looks like it should fly alright will post when I get it airborn.

RBOLETTO | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 22, 2012

I flew for the second time today, a verry smooth flight, durin a inverted cuban 8, verry slow, it broke both horizontal stabilazer, I don't know how I could land, when hit the ground because of the high descent ratio, it broke the engine mount. I'll fix it and reinforce it very well, but I see tha is a verry week plane. Teke care!

Rex | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 06, 2012

the value in this planes was good. the only thing i noticed different was the coulors were lighter and more seethrough. mine was shipped from hongkong to australia. i ordered it in the christmas season so it toook 17. when it arrived it had a big dent in the box i opened it up and the left side of the fuselage was chrushed slightly, and the cowling was deformed. other than that the kit was in good condition. the manaul was suprisingly easy to use with picture and tips. overall it was a decent plane.

NorthEast Pilots | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 30, 2011

After reading a negative review regarding the poor quality from one of bros there, I got worried as I purchase my plane a day before the post.
I am glad I got my in good condition and the quality is fantastic! Thanks HK!

Aleksei | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 19, 2011

Be aware! HK sends now another kit, not the one, shown on the pictures. It's much heavier (1060g from the box) and of low quality

mannigs | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 17, 2011

Nachdem beim Jungfernflug das halbe Hoehenruder nur noch an der Folie hing konnte ich die Edge nur mit grosser Not ohne weiteren Schaden landen. Nach der Reparatur wars beim zweiten Flug dann entgueltig vorbei. Nach einem Turn kam sie ins Trudeln und lie sich nicht mehr abfangen. Das ist mir, mit einem 3D Flieger, noch nie passiert!? Schade ums Geld!

Jari | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 16, 2011

There were following missing parts in my Edge:
- plywood motor mount
- wheel pants
- tail wheel
- accessories pack
- CA higes from the other aileron

I'm still waiting for the missing parts.

Gabriel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 07, 2011

Got mine, my landing gear and the wheel cap thingy is totally off from the pic!
My landing gear is not black as shown in the picture and the cap cupping the wheel if white! anyone else encounter this issue?

HOBBYKING...WHAT?!

Brain | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 19, 2011

I have flown this plane 7 times now and I can do most 3D tricks. This plane hovers very easily! The kit is very good for the price and goes together very nicely. Watch the COG! The only complaint is the control rods provided for the rudder and elevator. They are too weak and bend.
I am using:
OS 750 EP engine - 300wats on 3S battery
14x7 prop for 3D
40Amp ESC
3S 2200mAh Turnigy Battery
Hitec HS65 servos

  1. 1
  2. 2
Fichiers clients
No File Name Download [1319]
HK manual Egde 540 Download [3589]
Edge 540 from Mannigs Download [1484]
Edge 540 from Mannigs Download [1724]
weight of hardware Download [95]
huge gap between aileron and wing Download [34]
No File Name Download [77]
I'v got two comlects of hardware, but no Download [147]
weight of wing join tube Download [69]
weight of cowl Download [107]
  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires