S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Extra 260 1372mm 40E classe Echelle 3D (ARF)

Extra 260 1372mm 40E classe Echelle 3D (ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
3175 g
SKU:
HM-EX26040E

Combinez

et économisez plus
esc
battery
servo
motor
acc
Description
du

Les lignes classiques et la capacité éprouvée de l'extra 260 se combinent pour en faire un des modèles les plus populaires de voltige. Le HobbyKing supplémentaire regarde certainement la partie et ne vous méprenez pas, le vol 3D est ce que ce superbe modèle est tout! La qualité de cet extra est tout aussi bon qu'il obtient, la cellule a été construit pour maintenir le poids de vol minimal, mais assez fort pour prendre la peine de voltige extrêmes, la superbe couverture de qualité a été savamment appliquée et pour la touche finale, le capot, la canopée et roue pantalons sont finis dans une peinture brillante profonde. Le matériel est excellent et également choisi de garder le poids de vol à un minimum absolu et bien sûr le modèle caractéristiques prise dans le tube d'aile et CF que vous attendez pour un transport facile. Les H-Roi supplémentaires 260 effectue chaque pouce aussi bon qu'il semble, naturellement, il fait un grand plan de sport, mais il serait juste de dire que le hardcore 3D est ce que l'extra a été conçu pour. La précision de la cellule, superbe allure, la qualité supérieure de la ligne et étonnantes caractéristiques de poids plume font Extra 260 un avion doit avoir pour tous les pilotes de voltige et 3D!

Caractéristiques:
• Un look classique
• construction de qualité supérieure et couvrant
• Facile et rapide à construire
• Poids ultra léger mais solide cellule
• Superbement appliquée, revêtement de haute qualité
• airfoil empenage complète
• Rotule fil de piano barres de commande et tirer / pull gouvernail
• capacité 3D Superbe
• Montage sur le terrain rapide, facile à transporter

Spécifications:
Envergure: 1372mm
Longueur: 1240mm
Wing Zone: 37dm2
Poids à sec: 1100g (inc tout le matériel)
Voler Poids: 2000g ~ 2200g (environ)

A besoin:
Votre propre 4 ~ 6 canaux TX / RX
42mm Brushless Outrunner Motor
60A ~ 80A ESC
4 x Digital High Torque Parc ~ Std servo
4s 3300mAh ~ 4500mAh ~ 5s Lipoly batterie
50mm Spinner
UBEC

Product
Specifications

Informations supplémentaires

  • Référence:
    HM-EX26040E
  • Brand:
    Non communiqué
  • Poids (g)
    3175.00
  • Longueur
    1035.00
  • Largeur:
    247.00
  • Taille:
    415.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I've ordered the model on a Sunday from the global warehouse and got it next Friday in the UK - perfect service. The kit is complete, very well built, solid motor mount, no need to re-glue. GRP cowl and spats perfectly spray painted, complete set of accessories, no need to replace anything apart from the tail wheel ( I don't like to fix it to the rudder, but it's a matter of taste), printed short instructions are included. I've equipped her with an NTM 42-48 650 KV, YEP 90A ESC, Turnigy Nano Tec 5S 5Ah 35-70C Lipo, Prop APC 13x8, Bluebird Standard size 620 Servos for elevator and rudder, Bluebird BMS-706 low profile for ailerons (plastic gear unfortunately). CG can be easily adjusted by moving the lipo. In my case with the rather heavy servo at the tail, the battery is 10mm in front of the wing tube. Weight including battery is 2,450g. Time to assemble ready to fly 6 hours. Flies very well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great ARF. It's essentially the Hyperion Extra 260 40e.
Flying it with the NTM prop drive 42-38 and a 14X6 prop from Aeronaut.
Spinner is a Dubro 2.5". Battery: 2650 mAh 4s or 3000mAh 4S. Flies great.
Mine came in at 1800 g, fully built. Add a 200-250 g 4s LiPo and you have a nice Aerobatic plane just above 2 kg.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice plane

Motor Turnigy Aerodrive SK3 - 4250-500kv

Speed Controller TURNIGY Plush 80A w/ UBEC

Battery ZIPPY Compact 3700mAh 6S 35C Lipo Pack

Prop Tgs sport 14x8E

Servo Corona DS339HV Digital Metal Gear Servo 5.1kg/ 32g/ 0.13 Sec

flying time 15min

Video https://www.youtube.com/watch?v=F4dDLXpKOjY
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is an extremely well designed and built model. Very well painted and covered. The double bevelled control surfaces give a full 60 degrees throw in each direction, which is spot on for 3D aerobatics. The carbon win spar is 580mm long, which on a 1380mm wing span model is incredibly strong, it's also a very good fit in the fuselage and wings. I chose a SK3 5045-450kv Turnigy motor with 5mm stand-offs, a 16" x 7" Vox wood prop, YEP 100A ESC, Zippy Compact 5S 4000mAh 20C LiPo, Ino-Lab D250MG servos and a KST D145 servo on elevator via a C/F push rod from just behind the wing spar. C of G came out just in front of the wing spar, which is pretty much to spec. The pull/pull rudder set up has pre-installed tube exits at the rear of the fuselage. (very nice indeed ). All in all a very good model to assemble. I'll enjoy flying this one.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Converted mine one to glow. Flying with a ASP 52 four stroke. It flies well, the CG is alright with this engine. Thank's HK!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My 15 year old son flies this 260 5 days a week for the past 3 months. He punishes it through every possible maneuver and it is still going strong. Power is NTM Prop Drive Series 42-48 650KV, 70A ESC, 4 cell 2700ma battery, 16 x 7 prop. Take-off is 6 feet on grass, climbs straight up until nearly out of sight, flight time 8-10 minutes depending on power used. This 260 is both highly maneuverable and controllable. It has a gentle and predictable stall and does not surrprise with anything unexpected. Beef up the landing gear attach structure before flight and enjoy great flying.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just a great plane! Installed SK3 4250 500kv motor; AE 80a esc; Turnigy s3317m x 4 servos; 3a UBEC; Zippy compact 3700mAh 35c 5S pack; 15x8e wood prop. This setup it's not for speed, but has plenty of tork when you need it. Goes vertical @ half throttle. With around 2:1 thrust to weight, wonder why:). Cruise around under half throttle. Inverted flight is perfect. Knife edges beautifully. Put in a decent size rudder servo arm on pull pull setup. Glides in forever with a slight breeze. With this setup, CG is almost spot on with battery edge on and hard up on carbon spar in fuse.
Overall, one of the best aerobatic flyers I have!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good plane
I used 4258 NTM and 4s 4000 initially
Changed to 4248NTM with Turnigy Nano Lipo $s 3300 Lipo and 13X7 prop
190g lighter than initial combo
This latter combo does 750 Watts plus which is more than adequate
5 minute fairly aggressive aerobatic flight and Lipo's need 2000Mah to recharge
Good combo
Very good value
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
First flight was uneventfull, it did't need any trim to either control. The power is very very good for the weight - 4S is plenty, 5S would just be redundant weight. I made double upline snaps with out it slowing down at all. Tracking was excellent in the calm wind. Rolls were very axial. In knife-edge it pulled a bit to the belly with the CG at 950mm (at the wing tube), but the manual calls for 115, so I will move it back.

The Extra is lighter than the YAK 54 40e and i fly it on 4sp1 4000 facing alot of power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good model that flies well once the motor thrust line is correct. Very little knife edge coupling. Mine is setup with a SK3 4240 760kV spinning a light electric 13x6 wooden prop powered by a 4s 4000mAh giving around 750W which is perfect for this plane. Flight times are well over 10mins. I have used Hitec HS225 servos all around.
This is the same as the Hyperion model at a very good price.
The only negative is the colour scheme which, although looks smart (based on Patty Wagstaff's full size version) is not good for visibility, I'd suggest adding some large brightly coloured sponsors stickers.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
esc
battery
servo
motor
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.