New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Extra 330SC 1650mm classe 90e Echelle 3D (ARF)

Extra 330SC 1650mm classe 90e Echelle 3D (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
HM-EX33090E
WANT FREE SHIPPING? Click here to find out more!

Les lignes d'échelle classiques et la capacité éprouvée du 330SC supplémentaire se combinent pour en faire l'un des modèles de voltige les plus établis et populaires. Le HobbyKing supplémentaire regarde certainement la partie et ne vous méprenez pas, le vol 3D est ce que ce superbe modèle est tout!

La qualité de cet extra est tout aussi bon qu'il obtient, la cellule a été construit pour maintenir le poids de vol minimal mais assez fort pour prendre la peine de voltige extrêmes. La superbe couverture de qualité a été savamment appliquée et pour la touche finale, le capot, la canopée et roue pantalons sont finis dans une peinture brillante profonde. Le matériel est excellent et également choisi de garder le poids de vol à un minimum absolu. Le 330SC supplémentaire comporte également prise dans le tube d'aile et CF que vous attendez pour un transport facile.

Le HobbyKing 330SC supplémentaire effectue chaque pouce aussi bon qu'il semble, naturaly il fait un grand plan de sport, mais il serait juste de dire que le hardcore 3D est ce que l'extra a été conçu pour. La précision de la cellule, superbe allure, la qualité supérieure de la ligne et étonnantes caractéristiques de poids plume rendre le 330SC supplémentaire d'un avion doit avoir pour tous les pilotes de voltige et 3D!

Caractéristiques:
Un look classique à l'échelle
construction de qualité supérieure et revêtement
re-inforced aluminium train d'atterrissage
Facile et rapide à construire
poids ultra léger mais solide cellule
Superbement appliquée, revêtement de haute qualité
airfoil complète empenage avec prise en stabilisateur horizontal
lien Ball barres de commande de fil de piano et tirer / pull gouvernail
Superbe capacité 3D
assemblage sur site rapide, facile à transporter

Spécifications:
Envergure: 1650mm
Longueur: 1636mm
Wing Zone: 58.2dm2
Poids à sec: 2244g (inc tout le matériel)
Voler Poids: 3700g ~ 4000g (environ)

A besoin:
Votre propre 4 ~ 6 canaux TX / RX
50mm Brushless Outrunner Motor
60A ~ 80A ESC
4 x Digital High Torque Std servo
Batterie 3300mAh ~ 4500mAh 6s Lipoly
75mm Spinner
UBEC

  • UGS HM-EX33090E
  • Brand -
  • Capacité ( mAh ) -
  • Poids 6600.0000
  • Longueur 1360.00
  • Packaging Width 265.00
  • la taille 530.00
  • Turnigy Extra 330 90E
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a fantastic model, flies very precisely and is an equal to my Sebart Angel 50 in terms of flight performance. Very well built with suitable strengthening in the right places, the aluminium reinforcement to the undercarriage mount is a welcome feature.
My setup is a Scorpion 4025 440kV motor and Castle Talon 90 ESC, turning a 16x8 prop giving 1500W and good vertical performance. This setup is fine for sport/aerobatic flying but a bit more power would be needed for all out 3D. Servos are Hitec HS77 on aileron and elevator and HS5485 on rudder. All Up Weight with a 6s 5000mAh battery and Scorpion backup guard is just under 4kg.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a fantastic model, flies very precisely and is an equal to my Sebart Angel 50 in terms of flight performance. Very well built with suitable strengthening in the right places, the aluminium reinforcement to the undercarriage mount is a welcome feature.
My setup is a Scorpion 4025 440kV motor and Castle Talon 90 ESC, turning a 16x8 prop giving 1500W and good vertical performance. This setup is fine for sport/aerobatic flying but a bit more power would be needed for all out 3D. Servos are Hitec HS77 on aileron and elevator and HS5485 on rudder. All Up Weight with a 6s 5000mAh battery and Scorpion backup guard is just under 4kg.

Finally, the numbers:
- AUW = 3810 g
Setup:
- Ailerons : Turnigy 620 DMG HS (x2)
- Rudder : Turnigy 620 DMG HS
- Elevator : Corona DS329MG Digital (x2)
- Motor: Turnigy 5065 400kv 18x8
- ESC : HobbyWing 100 A
- Ubec
- Batteries : Zippy Compact 6S - 4500 mAh - 35 C

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Finally, the numbers:
- AUW = 3810 g
Setup:
- Ailerons : Turnigy 620 DMG HS (x2)
- Rudder : Turnigy 620 DMG HS
- Elevator : Corona DS329MG Digital (x2)
- Motor: Turnigy 5065 400kv 18x8
- ESC : HobbyWing 100 A
- Ubec
- Batteries : Zippy Compact 6S - 4500 mAh - 35 C

I have been working on it. It's nearly perfect exept mine has a bad alignment of the horizontal stab...I would say 1-2 degrees. The vertical stab seems to be OK though. Hard to leave this that way in a pattern/3D airplane...It needs a big mod. All in all it is still a very nice airframe !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have been working on it. It's nearly perfect exept mine has a bad alignment of the horizontal stab...I would say 1-2 degrees. The vertical stab seems to be OK though. Hard to leave this that way in a pattern/3D airplane...It needs a big mod. All in all it is still a very nice airframe !

Probably one of the best ARF I've ever had. The airframe is top notch quality. However, theres is no manual in mine (this is not really a problem as this ship is not for beginner).
If really you ant to search for bads I would say:
- It is not really scale (canopy is to forward compared to the real one)
- Cowl fit is not the best I've seen
The goods:
- Airframe construction is top notch (light, well built)
- Hardware is very good
- Covering is nearly perfect
- Price for that kind of aircaft
BTW you will need 5 servos (2 for elevator).
I'll post my setup and test flight as soon as I can.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Probably one of the best ARF I've ever had. The airframe is top notch quality. However, theres is no manual in mine (this is not really a problem as this ship is not for beginner).
If really you ant to search for bads I would say:
- It is not really scale (canopy is to forward compared to the real one)
- Cowl fit is not the best I've seen
The goods:
- Airframe construction is top notch (light, well built)
- Hardware is very good
- Covering is nearly perfect
- Price for that kind of aircaft
BTW you will need 5 servos (2 for elevator).
I'll post my setup and test flight as soon as I can.

Fantastic build. Simply stunning quality for the price.
MOTROLFLY DM-4325 (20mm spacers)
Turnigy dlux 120A HV
Haiyin H5000.6S.35 battery
2200 2S LiFe
4 HXT12 HXT 10kg Servo
1 POWER HD 8315TG TITANIUM ALLOY GEAR SERVO - 15 KG for Rudder
FrSky X8R receiver and Taranis Transmitter
Fabulous build. Balanced perfectly and flew on rails. Most fantastic flight ever. I will probably buy another to have in reserve just in case I mess up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic build. Simply stunning quality for the price.
MOTROLFLY DM-4325 (20mm spacers)
Turnigy dlux 120A HV
Haiyin H5000.6S.35 battery
2200 2S LiFe
4 HXT12 HXT 10kg Servo
1 POWER HD 8315TG TITANIUM ALLOY GEAR SERVO - 15 KG for Rudder
FrSky X8R receiver and Taranis Transmitter
Fabulous build. Balanced perfectly and flew on rails. Most fantastic flight ever. I will probably buy another to have in reserve just in case I mess up.

Maidened her today. It is amaizing! Best 3D plane in this size class I've ever flown. I'm thinking of buying another one just to have it by hand in case of crash haha!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Maidened her today. It is amaizing! Best 3D plane in this size class I've ever flown. I'm thinking of buying another one just to have it by hand in case of crash haha!

So, just after she came to me I decideded to make it in electric drive. For the price and quality I love this airframe. Will see how about flight characteristics. Others claim that she flies really good. Aiming not to exceed 4kg with SK3 5055 430kv, Xoar 18x8PJN, Zippy Compact 5800/6s/25c, YEP 80, UBEC 5-7,5A Turnigy, HK47011MG on ailerons and rudder, HS-7775MG on elevators. Will post final setup after maiden and some next 10-15 flights. So far waiting for batteries and servos to arrive. Stay tuned!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So, just after she came to me I decideded to make it in electric drive. For the price and quality I love this airframe. Will see how about flight characteristics. Others claim that she flies really good. Aiming not to exceed 4kg with SK3 5055 430kv, Xoar 18x8PJN, Zippy Compact 5800/6s/25c, YEP 80, UBEC 5-7,5A Turnigy, HK47011MG on ailerons and rudder, HS-7775MG on elevators. Will post final setup after maiden and some next 10-15 flights. So far waiting for batteries and servos to arrive. Stay tuned!

This plane is great for 3D. After 6 flights I'm very impressed and would definitely buy another. There's no knife edge coupling that I could detect. Elevator, harrier, hover, flat & wingtip spins, pop-tops etc were all very nice.

It needed more upthrust so I added 2 washers to each of the bottom motor mounts.

Here's the gear I'm using:

Motrolfly DM4325 380KV Motor (requires 20mm spacers to reach the front of the cowl),

19x8 APC prop,

YEP 100A 6S ESC,

Castle creations 20A BEC,

Turnigy nanotech 6S 5000mAh batt,

3x BMS-820DMGplusHS servo,

2x BMS-990DMG servo (elevators),

3" spinner

AUW = 4.00kg

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane is great for 3D. After 6 flights I'm very impressed and would definitely buy another. There's no knife edge coupling that I could detect. Elevator, harrier, hover, flat & wingtip spins, pop-tops etc were all very nice.

It needed more upthrust so I added 2 washers to each of the bottom motor mounts.

Here's the gear I'm using:

Motrolfly DM4325 380KV Motor (requires 20mm spacers to reach the front of the cowl),

19x8 APC prop,

YEP 100A 6S ESC,

Castle creations 20A BEC,

Turnigy nanotech 6S 5000mAh batt,

3x BMS-820DMGplusHS servo,

2x BMS-990DMG servo (elevators),

3" spinner

AUW = 4.00kg

This looks the goods all fits great and looks even better using 50/60 380 kv on 6s will report back after maiden

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This looks the goods all fits great and looks even better using 50/60 380 kv on 6s will report back after maiden

This is such a great plane, put cf landing gear, best plane I've had, 6 cell 20x6 better on an 8 cell same prop, 275 kv 120 Hv esvc, 2000w!! it is the pride of the hangar, got 1.3 balsa Pitt on the way

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is such a great plane, put cf landing gear, best plane I've had, 6 cell 20x6 better on an 8 cell same prop, 275 kv 120 Hv esvc, 2000w!! it is the pride of the hangar, got 1.3 balsa Pitt on the way

  1. 1
  2. 2
Customer files
My Extra just after maiden Download [563]
No File Name Download [449]
No File Name Download [608]
No File Name Download [1190]
No File Name Download [391]
Maiden Flight Download [4620]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!