S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global

F-15 70mm EDF Jet w / Retracts (ARF)

F-15 70mm EDF Jet w / Retracts (ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
1865 g
SKU:
F-15BU_70KIT

Combinez

et économisez plus
esc
battery
servo
motor
acc
Description
du

Ceci est une belle taille F-15 ARF avec un système de peinture distinctive déjà fait pour vous, et fourni avec une unité EDF 70mm, kit matériel complet et un ensemble de rétraction mécanique, vous permettant de correspondez le groupe motopropulseur et servos de votre choice.To obtenir le meilleur de ce modèle, vous aurez besoin de se pencher sur un 4s mis en place, et en raison du nombre élevé d'asservissement, en particulier si vous choisissez d'adapter les escamote fournis, nous vous conseillons vivement un CES OPTO en conjonction avec un 5A UBEC pour la puissance RX. Caractéristiques techniques: Envergure: 750mmLength: zone 1100mmWing: 12dm2Wing charge: 80g / dm2Flying Poids: 950g 4 ~ 5 canaux (gaz, ascenseur, ailerons, direction, escamote) Inclut: Tout Hardware70mm EDF Fan UnitColour / Photos Instruction BookletSet de Retracts mécaniques avec des roues requis : Votre propre Tx & Rx28mm EDF moteur Brushless pour 4s (arbre de 4mm) 9 x 9g Servo + 1 x 17g Servo45A ~ 60A ESC5A UBEC2200mAh 4s Lipoly Batterie

Product
Specifications

Informations supplémentaires

  • Référence:
    F-15BU_70KIT
  • Brand:
    Non communiqué
  • Capacité ( mAh )
    Non
  • Poids (g)
    1865.00
  • Longueur:
    990.00
  • Largeur:
    230.00
  • Taille
    300.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
For start the assembly instruction are very poor quality, spacialy for the retracting gear set-up, goody's for servos are not fitting with mine
so i have to put mine, missing some parts for df unit installation, rear landing gear has to be modified to fit as well as to foam body, lading gear are the same as for the f-16 actually, glue was almost fully dry
but i was planning to use mine anyway, on mine no thrust vectoring
with a 60a esc the plactic protector on the bottom is not big enought
wirering on the motor is not fitting with the hole on the foam, bit of rework to do here and there.
for my first assembly kit it's a good chalenge, hope everything turn right with it.
assembly should be finish soon as well as the spring here in quebec
follow up on maiden flight later.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I think this F15 is a great buy. I left the landing gear off and moved the battery forward leaving the battery bay for the receiver. If I were to mount the landing gear I would bend the main gear straight and use the Variable rate knob on my transmitter with a bigger servo. The noise gear needed some work too, but all in all it was a great project and a very nice flying airplane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just forget about the landing gear is app 177 g, the bird have unlimited capacities and fly real scale
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
E' un modello che non lo consiglio dicono che i carrelli sono retratti ma ce da lavorci molto perch non entrano nella loro sede sono da piegare e tagliare a meno che non li lasciate fissi, per aprire la fusoliera bisogna tagliare i due copri vettori perch incollati non riesco a capire la necessit visto che bisogna metterci il motore, la qualit comunque scarsa.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Don't waste your money on this, of course its cheap but still the quality of the plane doesn't compliment the price tag.
Very cheap foam, main landing gears do not fit in the compartment...
you cant have much choices with the batteries as the battery compartment has limited space....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi:
My setup for this is:
Hobby King 60A ESC 4A UBEC, EDF Ducted Fan Unit 5Blade 2.68inch 68mm, 4 HXT900 servos, and Turnigy 450/500 H2223 Brushless outrunner 4400KV, 4S 2200mAh 45C B Grade lipo. No landing gear, hand launch setup.
Airframe plus motor plus servos plus ESC, 740 grms. Battery plus Wattmeter 340 grms. AUW 1080 grms, max 940 watts 62 Amp, unlimitd vertical, I guess aprox 1300 grms of thrust with edf mounted inside plane.
Brittle foam easy damaged even for a little bump.
This setup is amazing (at least for me). Easy hand lauch, and good speed (not measured).
Motor and ESC reaching its limit. Very hot ESC, motor warm to hot.
3 to 4 minutes of flight with reserve for two landing attempts. Only 5 flights, I return with more comments on next fligths.
Motor and EDF 2 hours of work for correct balance. Balancing is a must.

Regards.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
esc
battery
servo
motor
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.