Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

FF GeeBee R2 EP .25 ARF

Generating Links

FF GeeBee R2 EP .25 ARF

Prix:

Now save économisez 0,00 € 0,00 €

87,01 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
FF_geebee
Livraison gratuite? Cliquez ici pour apprendre plus!

Pas pour la feinte de cœur. Le Granville Brothers tout plan de course américain, le GeeBee est une machine volante Iconic!

Construit avec un fuselage en fibre de verre du GeeBee R2 EP est bien fini et peint et est livré avec un pantalon de roue.
Ce plan vous prendra environ 4 heures pour terminer. Si vous avez peur des exercices ou des petits travaux de fabrication, alors ce nest pas le plan pour vous.
AVERTISSEMENT: Ce plan ne doit être piloté par des pilotes expérimentés!

Spec.
Matériel: ailes en fibre de verre Fuselage / Balsa
Envergure: 1036mm
Longueur: 623mm
Wing Zone: 21dm sq.
Hauteur: 250mm
Airfoil: NACA2416
Voler Poids: 1200g (en fonction de la batterie / moteur utilisé)

Système d'alimentation requis (vendu séparément).
Prop: 7060 Diamètre minimum
Moteur: 35-30 ou plus outrunner 1700kv +
ESC: 30A +
Batterie: 1600mAh 3S +
Servos: 9g ~ 20g

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

ravdigo | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 07, 2011

This is the worst model for fly, if you bougth or will buy, please put a really strong motor (similar 46 or more).

mannigs | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 18, 2011

Ein Tipp zum Fahrwerk

Beide Gestaenge,durch LEICHTES biegen,angleichen und von dem Ende auf das das Rad kommt ca 5mm abschneiden(nur einen Stellring nutzen).

Jetzt kommts! Die zwei Felgenhaelften eines Rades kann man,mit SANFTER Gewalt trennen. Man hat dann pro Rad zwei Felgen und einen Reifen.

Die Teile knnen im Radhaus einzeln und der Reihe nach wieder auf der Radnabe zusammen gefgt werden. Ich hoffe ich konnte

helfen.

pejay | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 31, 2011

Beautiful plane and with a fantasrtic finish. It is truly amazing how it can be sold at a mere 80 bucks. Imagine making only a fibre glass body for that price. It's a great deal and I will buy one more just to keep for spare. Or use with a glow engine. The plane is actually not made for electrics. There is no space for battery but have plywood cut out for a tank. Wood motor mount is not very good and I think I see on the picture here that HK use a HXT mount. With a Turnigy C35-36 motor the mount HXT-C28-26 (height 48 mm) should fit nicely so that the prop will stay close to the cowling.You have 85 mm distance inside from fire wall to cowling opening. I regretfully did not use this mount but the supplied one but will do this on the next plane. And I think you need to angle motor mount a few degree down and to the right. The fire wall is straight in 90 degrees. I used the dummy motor and cut out ventilation holes around the periphery - looks much better than the large gaping hole up front.

ravdigo | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 18, 2011

A lot of work,more than 5 hour for finish, manual incomplete. But looks nice.

FERNIMANN | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 22, 2011

Esta precioso pero Sencillamente no lo compres, sigue mi consejo...

Big Steve | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 06, 2010

Plane looks GREAT out of the box, unfortunatly a few problems with decals. It's 7-11 decal sheet all 7's no 1'or 11's... Second ditch the crap they give you and run goldenrod for controls, stock to heavy and flimsy. Second running a 1000kv motor 3s 2500 and a 9x6 apc WILL NOT lift off the ground. Buried the nose after 25 feet or so, didn't even think of lifting off. suggest go to 4 cell OR switch to a 10x6 maybe a 11x4.5. Defienatly move wheels as far forward as will allow in wheel pants, and rule of thumb 1/3 wing chord. CG perfect but as I said with my set up would NOT take off in a 50mph headwind!.... :( Bigger battery or larger prop!...

creature_ceo | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 07, 2010

&#12385&#12423&#12387&#12392&#37325&#12356&#12391&#12377&#12364&#12289&#36074&#24863&#12399&#12356&#12356&#12391&#12377&#12290

&#39131&#12435&#12391&#12427&#23039&#12399&#12363&#12431&#12356&#12356&#12391&#12377&#12364&#39131&#12400&#12377&#12398&#12399&#12385&#12423&#12387&#12392&#38627&#12375&#12356&#12391&#12377&#12290

&#12456&#12524&#12505&#12540&#12479&#12399&#36890&#24120&#12398&#21322&#20998&#12367&#12425&#12356&#12398&#21205&#12365&#12395&#12375&#12383&#12411&#12358&#12364&#12356&#12356&#12391&#12377&#12290

&#12414&#12392&#12418&#12395&#39131&#12400&#12379&#12427&#12475&#12483&#12486&#12451&#12531&#12464&#12364&#20986&#12427&#12414&#12391&#20309&#24230&#12418&#33853&#12392&#12375&#12390&#12375&#12414&#12356&#12414&#12375&#12383&#12289&#12289&#12289&#12290

Client | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 07, 2010

&#37325&#12356&#12391&#12377&#12364&#36074&#24863&#31561&#12424&#12367&#12391&#12365&#12390&#12356&#12414&#12377&#12290

&#39131&#12435&#12391&#12427&#23039&#12364&#12363&#12431&#12356&#12356&#12391&#12377&#12290

&#12456&#12524&#12505&#12540&#12479&#12364&#12363&#12394&#12426&#21177&#12367&#12398&#12391&#24369&#12417&#12395&#12290

Client | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 03, 2010

muito bonito o geebee e uma vergonha que no podemos comprar pois no vem para o brasil

Client | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 31, 2010

Regarding the landing gear :

Forget the delivered and wheel pants : make a new one, 40mm higher and 40mm fronter with whell pants made of 6mm depron. This makes it "land-able" and give a more scale aspect !! It is also needed to reinforce the attachement in the wing.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Fichiers clients
Gee Bee front Download [490]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires