S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • USA

Firstar 1600 EPO / Plastic 1600mm (PNF)

Firstar 1600 EPO / Plastic 1600mm (PNF)

QTY:

Now save enregistrer 0,00 € 0,00 €

102,49 €
Rating:
Stock:
Poids
3184 g
SKU:
043000018-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Combinez

et économisez plus
battery
acc
Description
du

Le Firstar 1600EX est une plate - forme de FPV attrayant et superbement conçu avec aa multitude de fonctionnalités soignées qui font de ce modèle un des meilleurs de sa catégorie.

Pour la ténacité et la fiabilité, le modèle dispose d' un fuselage moulé par soufflage qui utilise Nylon et est pratiquement indestructible, les surfaces de vol sont tous fabriqués à partir de mousse EPO difficile. Du point de vue pratique, les ailes sont plug-in et le modèle ne nécessite pas de colle pour l'assemblage. Tout vis simplement ensemble. La verrière extérieure est purement pour des regards et est utilisé lorsque le Firstar 1600EX est piloté comme un planeur, mais Fait passer en quelques secondes pour révéler une plate - forme prêt à photographier, avec un trou de montage panoramique / inclinaison servo qui a été pré-moulé. Cette grande couverture caméra plate - forme / aile est fixée par un loquet de dégagement rapide et une fois enlevé, révèle immense espace couvert pour les batteries et l' équipement de FPV de montage sur une plaque pré-équipée contreplaqué. Tous les servos, moteur et ESC sont bien sûr pré-installé.

L'aile de deux pièces a moulures pour ajouter des volets si désiré plus moulé C de G indicateurs sur la face inférieure des vérifications avant vol rapide. Il ne fait aucun doute que c'est un superbe design, le modèle de FPV de haute qualité à un excellent prix. Il serait juste de dire qu'il est plus agréable à regarder que la plupart des plates - formes de FPV, pour ne pas mentionner beaucoup plus difficile, la Firstar 1600EX donnera les heures RC pilotes de plaisir pendant de nombreuses années à venir!

Caractéristiques:
• Plug and Fly - Juste ajoutez votre choix de batterie, émetteur et récepteur
• Moulé ailes OEB et moulé par soufflage fuselage en plastique
• compartiment avant du fuselage spacieux
• Auvent / trappe a fond plat pour le montage caméra FPV
• Les performances de vol stable
• volets facultatifs
• Plate-forme de montage plat arrière de l'aile pour monter l'antenne FPV

Spécifications:
Envergure: 1600mm
Longueur: 1044mm
Voler Poids: 950g
Moteur: 2812 1400KV brushless
ESC: 30A ESC
Servo: 4 x 9g

Obligatoire:
4 ~ 5 émetteur et le récepteur CH
3S 11.1V 1800 ~ 2200mAh batterie LiPoly

Product
Specifications

Informations supplémentaires

  • Référence:
    043000018-0
  • Brand:
    Non
  • Poids (g)
    3184.00
  • Longueur
    1050.00
  • Largeur:
    170.00
  • Taille:
    240.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
playlist_add_check Overall
trending_up Value
Hello
bon motoplaneur, moteur suffisant pour un débutant.
attention au réglages avant le premier vol; pour équilibrer le planeur et bien positioner les ailes de manière symétrique.
bien lancer l'apareil gaz à fond; je recommende les batteries 3S 2200Mah 40C pour plus de puissance. seulement 2 servos au déballage. maintenant 4 annoncés.
bon vol. !!!!!!!!!!!!!
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
trending_up Value
playlist_add_check Overall
love this place. solid construction and decent glide capabilities, haven't had it long but so far it's outstanding i did swap out the motor and speedy as well as aileron servo's and elevator servo. and used them for flaps while using mg servo's all round, only because of the distance i want to do with this i dont want any failures.

all in all on the build i'd tell everyone to go buy one.!!!

love it!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The electronics are crap so I replaced the lot.
The plane itself isnt too bad but and its a big but...
The motor mount and pod are awful.
They are both soft and brittle.
I have ordered the V2 mount from Hobbyking in the hope that I will at last have a good fpv platform.
In the end this has cost me nearly double the buying price to get it working well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The FPV raptor 1.6 is the best fpv plane i have had. Its rugged and has loads of carrying capacity. Just replace the electronics. They really need to supply a kit version.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is great aircraft. The only thing that lets this aircraft down are the wing bolts, it would be more convenient if it had some type to thumb screws or quick release system.

Has good pay load capacity, and EPO foam is good quality.

Packaging could be better to protect the aircraft, mine had damaged on vertical stabiliser, but nothing a quick soaking in boiling water couldnt straighten out.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The decals I received where like 100 years old, all curled up and they dont stick. Hinges also need some reinforcement but those minor complaints aside, quality wise it seems fine, and a fairly easy build. There is LOTS of room in the fuselage, I shouldnt have problems mounting a flight controller, GPS, OSD, and amp sensor.

I flew the maiden with a 2200mAH battery and no fpv gear besides a mobius in the cockpit. Its borderline tail heavy even in that configuration, pitch stability was bad, didnt fly nicely. Forget about even smaller batteries, with a 2700 and 3300 it balances out and becomes a much nicer plane to fly, however, it also becomes even more underpowered than it was. Its OK for FPV and learning how to fly, but the power just isnt there to get you out of trouble, and even doing a looping from level flight is nearly impossible without diving for speed first.

Lack of power makes take off also a bit of a challenge, it needs a healty throw. Although I did manage to take off from the snow with no problems. Maybe it will work on (wet) grass too.

Power aside, flight characteristics are very good. Glide angle is excellent and I suspect flight times will be impressive (didnt time my flights, and it was freezing cold, but I suspect 20 minutes will be a given). She is pretty forgiving when stalled (if cg is correct), rolls nicely, doesnt 'auto level' like a bixler, but i
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
<a href='http://www.hobbyking.com/hobbycity/store/uploads/684449117X991778X39.JPG' target=_blank>Igor</a>

'''
http://youtu.be/Jksawf6IYuc
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Purchased for my first FPV flying experience and flew well but felt a little under powered. Replaced all my servos for metal geared and fitted 40A ESC and a NTM 28mm 1400kv motor......perfect.
I went a step further and swapped out the wings for 2m Phoenix 2000 wings with minor alterations. Maidened it today and what a great plane for FPV gliding about was perfect. Needs a fair bit of weight in the nose and 2 x 2200mAh 3S batteries are perfect. As it doesn't use much power flight times are great too. HIGHLY RECOMMENDED.....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
May be a little under powered but this plane can take a beating. Went into a nose dive close to the ground and hit with a load bang. Picked it up and brushed off the dirt to find a little gouge in the nose. I replaced the battery and check the flight controls and I was flying in 5 mins.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I can't really recommend this one because it requires so much upgrading to make it good. Mine arrived with 2 dead servos so I replaced most of them. The body is hard plastic, which is nice, but it's also heavy meaning that if you're going to put in a big battery and FPV gear then you also need to upgrade the motor. With stock motor it's ok but slightly underpowered and definitely will NOT take off from the ground as advertised, even with a 2200 in there. I ended up upgrading the motor to a Rimfire .10, which now allows it to take off from the ground and gain altitude reasonably quickly. Of course this also required a new ESC. You can see where this is going... It's now a much more expensive model.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Firstar EX Glider

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
battery
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.