This turntable is extremely scale looking, looks just like the real thing with accurate scale details, it is supplied with 6 exit tracks and 4 over-run ends. The exit tracks can be unclipped and repositioned as necessary or these can be extended using the turntable extension pack (see related products).
The "thinking" turntable when used in conjuction with the Fleischmann turntable switch (supplied) will determine the rotation direction in order to access the desired exit. The power feed is activated within the turning bridge. The power to the exit with which the turntable is lined up with can be fed power using this switch. All other track exits remain isolated, even those opposite each other.
The turntable is divided into 7.5° sections with a maximum of 48 possible rail connections. The turntable can also be set for 15° section operation if required.
Note: This turntable requires mounting into a recess to keep the trackbeds flat, a 340mm hole needs to be cut in your layout board.
Length of Bridge: 310mm
Overall Diameter: 385mm
Overall Diameter with Extensions: 465mm