Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Floater-Jet OEB (ARF)

Generating Links

Floater-Jet OEB (ARF)

Prix:

Now save économisez 0,00 € 0,00 €

40,39 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
AXN-C-KIT
Livraison gratuite? Cliquez ici pour apprendre plus!

Le jet AXN Floater est un modèle parfait pour les débutants. Ses caractéristiques de vol stable et la manipulation pardonnant font la plateforme idéale pour apprendre à voler. Contrairement à certains modèles de sa catégorie l'AXN Floater-jet est livré avec ailerons dès la sortie de la boîte. Ceci est une surface de contrôle critique que tous les pilotes en herbe doivent maîtriser.

Construit à partir de mousse EPO forte avec une finition à haute brillance du AXN Floater-Jet est capable d'atteindre des vitesses élevées dans une petite quantité d'espace ou de glisse autour gracieusement sur la brise seulement besoin accélérateur pour gagner de l'altitude.

Les caractéristiques de vol prévisibles, à faible charge alaire et prop poussoir font aussi le AXN Floater-Jet une plate-forme idéale pour FPV. L'utilisation d'une batterie plus petite, comme un 1600mAh à 1800mAh 3S1P permettra de charge utile supplémentaire à l'avant de l'avion et faire trouver le bon CG sans avoir à ajouter d'autres poids de queue facile.

Le moteur et l'hélice 5x5 suggéré offrent à la fois la performance et le temps de vol en fonction de votre style de vol. Vous aurez besoin d'un 2100kv Brushless outrunner, 4 x 9gram servos, une batterie 1600mAh ~ 2200mAh 3S1P Lipoly (selon les exigences de la charge utile) un ESC 20Amp et votre propre émetteur et le récepteur (Tx / Rx) pour compléter ce modèle.

le temps et le temps éprouvé à nouveau le AXN Floater-Jet ticks toutes les cases à droite pour ceux qui cherchent à obtenir dans le passe-temps comme un débutant ou les pilotes intermédiaires qui cherchent à obtenir dans le monde passionnant de FPV vol.

Caractéristiques:
Envergure: 1290mm
Fusible Longueur: 860mm
Moteur: 2100Kv Outrunner (non inclus)
Hélice: x 5x5inch (2pc inclus)
ESC: 20A (non inclus)
Servos: 4 x 9g servo (non inclus) pour Rudder, ascenseur, 2x Aileron

Obligatoire:
Votre propre RX / TX
20A Brushless ESC
4 X 9g Servo
1600 ~ 2200mAh 3s Lipoly
moteur 2100kv Outrunner

  • Envergure ( mm ) 1280.00
  • AXN Floater Jet with Turnigy Graphene 1500mAh 3S 65C and 6x5 Prop.
  • Low, Slow, and Inverted
  • FLY TYME - AXN Floater Jet Build Tips & Review
  • FLY TYME - AXN Golden Hour
  • AXN-FLOATER WITH 70 mm EDF
  • AXN Floater Jet Build Review & Tips - FLY TYME
  • AXN Floater Jet Flight Footage - FLY TYME
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Jose Maria | Acheteur vérifié

  • Overall
  • Quality
  • Value

AXN Floater-Jet EPO 1280mm (ARF)

Mar 13, 2018

Nice and cheap plane to learn to fly. 4 servos (9g), 30A ESC and the recommended motor and you are flying at a very low cost.

martin | Acheteur vérifié

  • Overall
  • Quality
  • Value

Easy to fly. Fly at walking speed or with unlimited vertical.

Nov 20, 2017

Buy the kit with the motor as it has enough power for unlimited vertical. With this plane you can float around searching for thermals or fly mild pattern style aerobatics. No 3D. I now have over 60 twenty minute flights on mine and I would buy it again. I use a 6-4 or 6-4.5 prop with the stock motor and a 3 cell 2200mah battery. Mine does have a couple problems. Don't trust the factory glue joints on the arf. They are really poor! All three of them. Take the time to glue it together with epoxy you won't be sorry. The ailerons are undersized so mix in some rudder it helps improve the roll rate considerably. I Used brightly colored tape to reinforce the hinge points, wing underside and leading edge, and the bottom of the fuselage. Don't forget to use the thread locking compound and your good to go.

RobRoy | Acheteur vérifié

  • Overall
  • Quality
  • Value

AXN CF

Sep 02, 2017

This is a very good plane. Very stable flight caracteristics in the air and fast. It is also a good sailplane. Go up in the sky and turn the engine down. Keep the nose down for speed and up you go!
Use APC prop 6x5 for best results. y don t trust the added props.

Jack | Acheteur vérifié

  • Overall
  • Quality
  • Value

One of the best starter planes

Aug 28, 2017

Amongst the best learner planes out there at a bargain price. It will grow with you too as it handles well at slow floating speeds as well a medium speed acrobatics. Great to learn on as it is a pusher and you can hand launch and belly land. I started learning on this plane and was able to fly solo within 6 flights, as a complete beginner.

gav | Acheteur vérifié

  • Overall
  • Quality
  • Value

great value, goes fast and slow, glides ok. bargain price. Easy to build, Great first rc

Apr 14, 2017

Highly recommend this plane. Definitely get the cheapest model and click on the motor in the Accessories tab and order it too, You'll need a 2200 3s Lipo, four Hextronik 9g servos and 25A BEC3amp speed controller, all available through HK. If you dont have a radio get a basic Radio Tx/Rx, like Turnigy 4,5,6 or 8 channel. I started with 9x Before you build its a good idea to watch the xjet AXN build youtube vid. Can take off on short grass in the park or throw launch but watch the dive when you crank it on.

gav | Acheteur vérifié

  • Overall
  • Quality
  • Value

great value, goes fast and slow, glides ok. bargain price. Easy to build, Great first rc

Apr 14, 2017

Highly recommend this plane. Definitely get the cheapest model and click on the motor in the Accessories tab and order it too, You'll need a 2200 3s Lipo, four Hextronik 9g servos and 25A BEC3amp speed controller, all available through HK. If you dont have a radio get a basic Radio Tx/Rx, like Turnigy 4,5,6 or 8 channel. I started with 9x Before you build its a good idea to watch the xjet AXN build youtube vid. Can take off on short grass in the park or throw launch but watch the dive when you crank it on.

kaido | Acheteur vérifié

  • Overall
  • Quality
  • Value

good plane

Mar 09, 2017

Good for beginners. Very hard to break. Simple to fly.

SKY FALL | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 07, 2016

Great plane for the novice and the more professional Pilot

Richard | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 23, 2016

what a brilliant plane got this about a year ago, on the first flight it was a dream to fly until i somehow got confused and ended up nose diving into the floor snapping the plane in half, but within half an hour it was glued back together and still flys perfect to this day, it was easy to put together and for a first time build it took me quite a while (2hours) but in the end it turned out fine just remember the loctite or you will loose some screws in flight like me.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 23, 2015

nice plane, this is my first plane and it was no problem to me to build it and get it in the air. Its also no Problem to repair the foam with some glue or hot water.

I like to call this a perfect beginner plane, because its cheap repairable and easy to fly. And it has enough space for fpv equip and at least 20 min flight time.

Fichiers clients
Manual Download [493]
my axn floater-jet Download [233]
my axn floater-jet Download [233]
Manual 01 Download [121]
Manual 02 Download [121]
Manual 03 Download [135]
motor_2 Download [139]
motor_1 Download [129]
cabin Download [224]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Related Tags

Accessoires