Le jet AXN Floater est un modèle parfait pour les débutants. Ses caractéristiques de vol stable et la manipulation pardonnant font la plateforme idéale pour apprendre à voler. Contrairement à certains modèles de sa catégorie l'AXN Floater-jet est livré avec ailerons dès la sortie de la boîte. Ceci est une surface de contrôle critique que tous les pilotes en herbe doivent maîtriser.
Construit à partir de mousse EPO forte avec une finition à haute brillance du AXN Floater-Jet est capable d'atteindre des vitesses élevées dans une petite quantité d'espace ou de glisse autour gracieusement sur la brise seulement besoin accélérateur pour gagner de l'altitude.
Les caractéristiques de vol prévisibles, à faible charge alaire et prop poussoir font aussi le AXN Floater-Jet une plate-forme idéale pour FPV. L'utilisation d'une batterie plus petite, comme un 1600mAh à 1800mAh 3S1P permettra de charge utile supplémentaire à l'avant de l'avion et faire trouver le bon CG sans avoir à ajouter d'autres poids de queue facile.
Le moteur inclus et 5x5 Hélice offrent à la fois la performance et le temps de vol en fonction de votre style de vol. Vous aurez besoin de 4 x servos 9gram, une batterie 1600mAh ~ 2200mAh 3S1P Lipoly (selon les exigences de la charge utile) un ESC 20Amp et votre propre émetteur et le récepteur (Tx / Rx) pour compléter ce modèle.
le temps et le temps éprouvé à nouveau le AXN Floater-Jet ticks toutes les cases à droite pour ceux qui cherchent à obtenir dans le passe-temps comme un débutant ou les pilotes intermédiaires qui cherchent à obtenir dans le monde passionnant de FPV vol.
Fusible Longueur: 860mm
Moteur: 2100Kv Outrunner (inclus)
Hélice: 5x5inch (2pc inclus)
ESC: 20A (non inclus)
Servos: 4 x 9g servo (non inclus) pour Rudder, ascenseur, 2x Aileron
Votre propre RX / TX
20A Brushless ESC
4 X 9g Servos
1600 ~ 2200mAh 3S Lipoly
Great beginners plane, lots of space, and more fun to fly than the Bixler. it's faster, and takes serious abuse.Great fun plane, using stock motor and prop with 2650 3 cell lipo I am able to take off
from ground, added teflon on wings and fuse. Its 2.5 to 3 times faster than bixler3.
approx; 65-70 mph and 15 flight time.BEGINNER BUYERS BEWARE: Don't make the mistake I made thinking that this, or any similar plane is a "beginner" rc plane, after reading many overly positive, mostly misleading descriptions on this site. If you have not flown an rc plane before, you CANNOT fly an rc plane, and you WILL crash. Don't dive straight into the hobby, start off with a much cheaper plane of some kind that you aren't worried about crashing, or if your lucky to have a nearby hobby shop with a flight simulator, use it. You will be worried about crashing this plane, it is capable of a lot more than crashing. A bit more to the product... What reduced my value and quality rating, is that rather annoyingly this does not come with any glue to put it together with. Very few to no glues an average person would know about and could find in the local supermarket, can stick this material together. Otherwise, this is a good product, respectably strong, easy to assemble and good looking.I have just received my AXN from Hobby King and to my surprise I didn't get the tube of glue in the parts bag. After chatting with CS, they inform me that IT IS NOT part of the kit. They tell me that a compatible glue to use is the clear foam glue BUT GUESS WHAT?????, it's on back order here in Australia AND upon checking the chat for this glue, it appears IT CANNOT be ordered here in Australia even from the International warehouse, so now I have to find an alternate glue to assemble this plane..................... NOT HAPPY :-(Its a great plane...however they didn't include glue with the package which is kinda annoying. But the worst part is they sent one with a USED or refurbished motor, you can tell one of the magnets was reglued with epoxy because it was messy and not done well while the rest of them were perfect. Not worth the hassle of trying to get hobbyking to replace it so overall a bad situation. Otherwise yeah get one its a nice plane.
Overall not a bad plane, you just have to know that it will tip stall at low speeds on turns, other than that flaw its a nice plane to fly and has a great straight glide, I even found a thermo which kept it flying and increased it's altitude without any motor power(first time I have done this). I am mainly using this plane as an FPV plane and therefor I have scratch built a balsa canopy with a camera mount, the balsa canopy is covered in blue mono-coat. A few other mods I have completed are the reinforced motor mount(balsa and mono-coat again), a belly access hatch and I modified a Bixler2 landing gear using large wheels so I can take off using FPV from the grass. The last upgrade I will be doing is changing the motor and placing a better Turnigy 2200KV motor on it, something a little more reliable than the one that came with it. Still waiting for that one. I have pictures of all the current mods in the files section if anyone is interested in checking them out.An amazing plane. Easy to fly for beginners but push up the power and you can do basic aero with it. Pull back the power and fly it like a sailplane. 2 solid crashes (including one from inverted) and essentially no damage that a bit of steam and boiling water won't fix. Only negatives are that the ESC ventilation is not great in really hot weather (airflow is mostly blocked by battery), aileron pushrods are slightly too short and the 5x5 prop is not very good. Get a good APC 6x4 prop, cut a small vent for the ESC (if you wish), add some bright graphics/stickers on the bottom of the wings and longer pushrods for the ailerons and you have as near perfect as possible beginner-intermediate plane. Still a go to favorite even in moderate winds.I like this plane so much that i've bought a new and now i'm go to make the wings removeable so i can take it with me on vacation.
My favorit beginner plane than comes walrus and then the bixler 2.
I don't have a bixler 1 so i can't give my opinion of that one.
Flys great whit 6x5 prop just little bit noisy.Really enjoyed flying this plane for the first 10mins it was air, until a bird attacked it and it fell out of the sky. Will purchase anotherThis is my first plane since about 30 yrs ago and I am very happy. IT is an awesome fun aircraft to fly. I've crashed it once and had a couple of hard landings and with minor glue and tape I was back in the air in minimal time. It has been very forgiving and as said is fun to fly. I may buy another just to ensure I always have one of these.
my axn floater-jet Télécharger maintenant [233kb] No File Name Télécharger maintenant [72kb] How to hold wings on Télécharger maintenant [264kb] my jet Télécharger maintenant [2000kb] jet pack 2 Télécharger maintenant [2102kb] jet pack Télécharger maintenant [2137kb] axn body mod to put good's inside osd /c Télécharger maintenant [436kb] one fing hot axn "lipo fire" Télécharger maintenant [743kb] axn with horyzon hd camera Télécharger maintenant [655kb] axn fpv Télécharger maintenant [664kb] axn floater jet fpv set up Télécharger maintenant [700kb] AXN PROP Télécharger maintenant [83kb] prop saver Télécharger maintenant [24kb] Modified Bixler Gear Télécharger maintenant [2085kb] Belly Access Hatch Télécharger maintenant [2226kb] Reinforced Motor Mount Télécharger maintenant [2150kb] Reinforced Motor Mount Télécharger maintenant [2150kb] New Canopy For FPV Camera Télécharger maintenant [2203kb] AXN crash rebuild Télécharger maintenant [1009kb]